• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.444-449
• /
• 1998

A modal transducer in two-dimensional structure can be implemented by varying the distributed transducer's gain spatially. In this paper, a method based on finite element method is developed for optimizing spatial gain distribution of PVDF transducer to create the modal transducer for specific modes. Using this concept, one can design the modal transducer in two-dimensional structure having arbitrary geometry and boundary conditions. As a practical means for implementing this continuous gain distribution without repoling die PVDF film, the gain distribution is approximated by optimizing gain-weights of interface circuit. The whole spatial area of the PVDF film is divided into several electrode segments and the signals from each segment are properly weighted and summed by interface circuit. This corresponds to the approximation of a continuous function using discrete values. The electrode partition is optimized using the genetic algorithm. Gain-weights are optimized using the simplex search method. A modal sensor for first to fourth modes of aluminum plate is designed using PVDF film with gain-weighted interface circuit. Various lamination angles of PVDF film are taken into consideration to utilize the anisotropy of the PVDF film. Performance of the optimized' PVDF sensor is demonstrated by numerical simulations..

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.457-460
• /
• 1997

The photoconductive gain mechanism in various types of hydrogenated amorphous silicon devices, such as p-i-n, n-i-n and n-i-p-i-n structures was investigated in connection with applications to radiation detection. We measured the photoconductive gain in two time scales: one for short pulses of visible light $(<1{\mu}sec)$ which simulate the transit of energetic charged particles, and the other for rather long pulses of light $(\sim1msec)$ which simulate x-ray exposure in medical imaging. We used two definitions of photoconductive gain: current gain and charge gain which is an integration of the current gain. We found typical charge gains of $3\sim9$ for short pulses and a few hundred for long pulses at a dark current density level of $10mA/cm^2$.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.6
• /
• pp.522-529
• /
• 2000

This study was carried out to find the factors which are related to the weight gain during pregnancy of women and infant birth weight. The information of the general characteristics and pregnancy outcomes of the 506 women who had a delivery during Jan to Dec, 1997 in a hospital at Taegu area were collected from the medical records. The results are as follows. The mean age of the subjects was 29 years old and the average prepregnancy weight was 52.75kg. They gained 13.51kg of weight during the pregnancy. The weight gain during pregnancy was higher in prepregnancy BMI<20kg/m$^2$, the infant weight was heavier in groups that had over 14kg of weight gain during the pregnancy than other groups. The prepregnancy BMI was negatively correlated to weight gain during pregnancy(r=0.2825), and positively correlated to number of pregnancy(r=0.2146), number of living delivery(r=0.1409), and infant weight(r=0.1250). The baby weight was Positively correlated to weight gain during pregnancy(r=0.1392) and Apgar score(r=0.1627). The results showed that the prepregnancy BMI and weight gain during pregnancy may be the influential factors on the infant weight, thus we need to develop the specific nutritional management program according to the status of prepregnancy weight.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.209-212
• /
• 1997

Spectral gain variation characteristics of the silica-based erbium doped fiber amplifiers is investigated in the 1545-1557 nm wavelength region. For a given length of the erbium doped fiber, the gain($G_0$) with minimum spectral gain variation is uniquely determined. The spectral gain imbalance DG is nearly proportional to the difference between G0 and the operating gain(G) with the proportional constant of 0.1-0.2 dB/dB. For the gain flattened EDFA at the input power of -20 dBm/ch. and the gain of 21 dB, the output power and the optical signal to noise variations after 12 cascaded EDFAs were 5 dB and 3 dB, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.56-64
• /
• 2015

This study presents a model-based gain scheduling strategy for PI-based EGR controllers. The air-to-fuel ratio is used as an indirect measurement of the EGR rate. In order to cope with the nonlinearity and parameter varying characteristics of the EGR system, we proposed a static gain model of the EGR system using a new scheduling parameter. With the 810 steady-state measurements, the static gain model achieved 0.94 of R-squared value. Based on the static gain of the EGR system, the PI gains were robustly designed using quantitative feedback theory. Consequently, the gains of the PI controller are scheduled according to the static gain parameter of the EGR path in runtime. The proposed model-based gain scheduling strategy was validated through various operating conditions of engine experiments such as setpoint step responses and disturbance rejections.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.744-747
• /
• 2005

This research studied 6-Axes Articulated Robot Manipulator's gain Tuning in consideration of dynamic. First of all, search fur proportional gain of velocity control loop by dynamic signal analyzer. Proportional gain of velocity control loop is connected to dynamic signal analyzer. Next Select free Proportional Gain value. And Select amplitude X of sinusoidal properly so that enough Velocity Feedback Signal may be paid as there is no group to utensil department. Next step, We can get Bode Diagram of Closed loop transfer function response examination in interested frequency. Integral calculus for gain of velocity loop is depended on integral calculus correction's number. We can obtain open loop transfer function by integrator. And we can know bode diagram's special quality from calculated open loop transfer function. With this, Velocity Control Loop's Parameter as inner loop is controlled. Next In moving, when vibration occurs, it controls notch filter. And finally, we have to control fred-forward filter parameter for elevation of control performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.3
• /
• pp.388-394
• /
• 1999

Two experiments were conducted to subdivide isoleucine (exp. 1) and valine (exp. 2) requirements for maintenance from the requirements for growth of broilers aged 1 to 3 weeks. Purified diets were used, containing five graded levels of isoleucine and valine. Based on weight gain response, the isoleucine requirement for growth was 7.50 mg/g weight gain and the daily isoleucine need for maintenance (mg) was 0.044 per unit metabolic body size ($(Wg^{0.75})$). Based on the N gain response, the isoleucine requirement for growth was 0.317 mg/mg N gain and the daily isoleucine need for maintenance (mg) was 0.040 per unit metabolic body size $(Wg^{0.75})$. Based on weight gain and N gain response, the total isoleucine requirement was calculated 244 mg/day or 0.59% of the diet, 274 mg/day or 0.66% of the diet, respectively. From the relationship of weight gain and N gain, 5.07% of the retained protein was comprised of isoleucine; the reported isoleucine content of chick muscle was 4.42%. The valine requirement for growth was 9.84 mg/g weight gain and 0.36 mg/mg N gain whereas the maintenance requirement was 0.046 or 0.052 mg per unit of metabolic body size (Wgo.11. According to the model developed to estimate valine requirement, the total requirement was 319 mg/day or 0.77% of the diet, 315 mg/day or 0.76% of the diet, respectively. Previous reported valine requirements for growing chicks of 7~24 days old were in close agreement with these estimates. As a percentage of retained protein, valine was calculated to be 5.81% ; the reported valine concentration of crude protein of chicks' body including feathers was 6.72%.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.97-105
• /
• 2016

Radiography image detector produces digital images by collecting the charges from the incident x-ray photons and converting it to the voltage signals and then the digital signals. The fixed-pattern noise from the nonuinform amplifier gains in the employed multiple readout circuits. In order to correct the nonuniform gains, a gain-correction technique which is based on the gain map is conventionally used. Since the photon noise remains in the designed gain map, the noise contaminates the gain-corrected images. In this paper, experimental observations are conducted for filtering the remained noise in the gain map, and a filter optimization algorithm is proposed to efficiently remove the noise. For acquired x-ray images from detectors, the filtered gain maps are evaluated and it is shown that optimization algorithm can improve the filtering performance even for relatively strong fixed-pattern noises, which cannot be removed by a simple filter.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.4 no.1
• /
• pp.13-17
• /
• 2007

The brake gain adaptive wheel slip controller for a vehicle is designed in this paper. The brake gain from braking pressure to braking torque defined by friction coefficient, friction area and effective friction radius is estimated by the adaptive law based on the wheel slip dynamics. And the wheel slip controller is designed based on the estimated brake gain. The robustness of the designed controller is analyzed using Lyapunov function and the convergence of brake gain is verified. Proposed wheel slip controller is verified via CarSim simulation with two kinds of desired wheel slip ratio.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2143-2146
• /
• 2003

We propose, for the first time to our knowledge, a novel gain-clamping method for EDFA in WDM Add/Drop networks by introducing a disturbance observer technique. The proposed gain-clamping control input consists of the nominal gain-clamping control such as PI(Proportional and Integral) control and the additional control input for the compensation of the effects caused by channel add/drops. The additional control input is designed using the wellknown disturbance observer technique and can be implemented very easily with general electric elements. We proved the superiority of the new technique over the previous methods by showing simulation result of minimized dips and spikes that appear in power profile of EDFA output.