• The Journal of the Korean Society for Microbiology
• /
• v.22 no.4
• /
• pp.445-451
• /
• 1987

Coagglutination method is widely used for the diagnosis of Salmonella infection. This test, however, has a disadvantage of false positive reaction due to the coagglutination of staphylococci with non-specific immune complexes or anti-staphylococci antibody in serum. Salmonell O antigen was detected by enzyme immunoassay with protein A-bearing Staphylococcus aureus as in the solid phase. Horse radish peroxidase was labeled to IgG specific against Salmonella O antigen. This enzyme immunoassay was much more sensitive than conventional coagglutination method without false poitive agglutination. To improve the sensitivity for detection of Salmonella O antigen in samples, we tried to determine the optimal concentration of normal IgG that inhibits non-specific binding of horse radish peroxidase labeled IgG to staphylococci, and to establish the optimal condition of reaction between antigen-antibody complex and staphylococci. Non-specific binding of horse radish peroxidase labeled specific IgG to staphylococci was almost blocked when the enzyme labeled IgG was 500-fold diluted with phosphate buffered saline containing 2mg/ml of normal IgG. When staphylococci coated with antibody to Salmonella O antigen were mixed with antigen-antibody complex and then incubated for 1 hour at room temperature, the minimal detectable concentration of Salmonella O antigen was 1ng/ml. The sensitivity of enzyme immunoassay was 100-fold greater than a conventional coagglutination method. This enzyme immunoassay could be expected as an improved method for detection of other infectious agents.

• Analytical Science and Technology
• /
• v.18 no.6
• /
• pp.559-567
• /
• 2005

For the analytical method of PCDD/Fs in blood, which have been issued recently, SRM 1589a of NIST(National Institute of Standards and Technology) was used and a practical analytical method of PCDD/Fs in blood was presented through comparison of methods of Canada and Japan. The proposed method used alkali-digestion extraction for removal of the lipid effectively using two capillary columns. The limit of quantification of TeCDD/DF and PeCDD/DF was 1 pg/g-lipid, HxCDD/DF and HpCDD/DF was 2 pg/g-lipid, OCDD/DF was 4 pg/g-lipid. With consideration the range of detected concentration, calibration standards were presented as $CS_L$(0.1~1), $CS_1/2$(0.25~2.5), $CS_1$(0.5~5.0), $CS_2$(2~20), $CS_3$(10~100).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.1
• /
• pp.164-172
• /
• 1997

Two parameter technique that uses far-field stress and displacement distributions was applied to composite laminates in order to calculate mode II energy release rate, $G_{II}$ . The $G_{II}$ calculated by two parameter technique was compared with that calculated from the crack closure method to inspect the effectiveness of two parameter technique. Sensitivity study of two parameter technique to the crack extension size was also performed. The results showed that both methods produced comparable $G_{II}$ results. In particular, it was found that although the crack closure method was affected by the crack extension size, the two parameter technique was less affected by the crack extension size.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.8
• /
• pp.1102-1106
• /
• 2003

In our previous work we developed the Finite Field method in order to calculate the fifth-order Raman response. The method was applied to calculate various polarization components of the two-dimensional response of liquid $CS_2$. So far, all calculations relied on the dipole-induced dipole. Accurate time-dependent density functional theory calculations have shown that this model has big discrepancies, when molecules are close together as in the liquid. We now report results of investigations on the importance of multipole and electron overlap effects on the polarizability and the fifth-order Raman response. It is shown that these collision effects, especially the induced multipoles, are crucial in the description of the fifth-order response. The impact is found to be especially pronounced for the χ_{mmzzzz}^{(5)}$response that is solely due to interaction induced effects. The calculated response will be compared with various experimental results.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.247-250
• /
• 2003

In this paper, the boundary element analysis of viscoelastic strain energy release ,ate G(t) for the cracked linear viscoelastic materials is attempted. This study proposes the G(t) equation and the calculating method of G(t) by time-domain boundary element analysis for the viscoelastic solids. The G(t) is defined as the derivative of the viscoelastic potential energy $\Pi(t)$ with respect to crack length a. Two example problems are presented to show the applicability of the proposed method to the analysis of the cracked linear viscoelastic solids. Numerical results of example problems show the accuracy and effectiveness of the proposed method.

• Journal of applied mathematics & informatics
• /
• v.24 no.1_2
• /
• pp.179-190
• /
• 2007

In this paper, we consider the general variational inequality GVI(F, g, C), where F and g are mappings from a Hilbert space into itself and C is the fixed point set of a nonexpansive mapping. We suggest and analyze a new modified hybrid steepest-descent method of type method $u_{n+l}=(1-{\alpha}+{\theta}_{n+1})Tu_n+{\alpha}u_n-{\theta}_{n+1g}(Tu_n)-{\lambda}_{n+1}{\mu}F(Tu_n),\;n{\geq}0$. for solving the general variational inequalities. The sequence $\{x_n}\$ is shown to converge in norm to the solutions of the general variational inequality GVI(F, g, C) under some mild conditions. Application to constrained generalized pseudo-inverse is included. Results proved in the paper can be viewed as an refinement and improvement of previously known results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.719-724
• /
• 1994

This paper describes a hybrid surface-based method for smooth 3D surface approximation to a sequence of 2D cross sections. The resulting surface is a hybrid G $^{1}$ surface represented by a mesh of triangular and rectangular Bezier patches defined on skinning, branching, or capping regions. Each skinning region is approximated with a closed B_spline surface, which is transformed into a mesh of Bezier patches. Triangular G $^{1}$ surfaces are constructed over brabching and capping regions such that the transitions between each capping regions such that the transitions between each triangular surface and its neighboring skinning surfaces are G $^{1}$ continuous. Since each skinning region is represented by an approximated rectangular C $^{2}$ suface instead of an interpolated trctangular G $^{[-1000]}$ surface, the proposed method can provide more smooth surfaces and realize more efficient data reduction than triangular surfacebased method.

• Mycobiology
• /
• v.31 no.2
• /
• pp.105-112
• /
• 2003

Sclerotia of Grifola umbellata were cultivated by two methods such as burying and root inoculation methods. The sclerotia of G. umbellata produced by the burying method were $6.0{\sim}6.8{\times}3.4{\sim}4.6{\times}1.8{\sim}1.9cm$(Width$\times$Length$\times$Thickness) in size and $17.3{\sim}19.6g$ in weight, respectively. Their increase rate was $1.10{\times}1.12$ times. On the other hand, the sclerotia cultivated by the root inoculation method were $18.3{\sim}31.5{\times}12.5{\sim}26.4{\times}3.1{\sim}3.7cm(W{\times}L{\times}T)$ in size and $219.1{\sim}576.6g$ in weight, respectively. Their growth increment was $11.18{\sim}39.77$ times. The rhizomorphs of Armillaria mellea were developed with a high density under fallen leaves layer covering cultivation site, and distributed mainly between soil surface and soil depth of about 10 cm as well as colonized prominently on the inoculated wood logs. Fungal interaction between G. umbellata and A. mellea were observed mainly in the stage of white sclerotium of G. umbellata. The sclerotia of G. umbellata which were developed newly and harvested in the root inoculation method were twined with root hairs of host tree and rhizomorphs of A. mellea. The sclerotia of G. umbellata decomposing root hairs of host tree were confirmed through SEM examination. Physiochemical characteristics of soil in all cultivation sites had no significant differences. Soil pH were in the range of pH $3.98{\sim}4.40$. Organic matters were the range of $17.97{\sim}23.86%$ and moisture contents of soil were $12.00{\sim}18.20%$. Soil temperatures showed $12.9{\sim}13.8^{\circ}C$ in November and $22.0{\sim}23.9^{\circ}C$ in August, respectively. In conclusion, the root inoculation method seems to be a practical method for cultivating sclerotia of G. umbellata due to its many advantages such as simplicity of inoculation process, shortening of cultivation periods and facility of harvest.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.2111-2111
• /
• 2001

A chemoinfometrical method for evaluating the quantitative determination of crystallinity one polymorphs based on fourie-transformed near-infrared (FT-NIR) spectroscopy was established. A direct comparison of the data with the ones collected from using the and compared with the conventional powder X-ray diffraction method was performed. [Method] The pPure a and g forms of indomethacin (IMC) were prepared by reportedusing published methods. Six kinds of standard samples obtained by physically mixing of a and g forms. After the powder X-ray diffraction profiles of samples have been measured, the intensity values were normalized to against the intensity of silicon powder as the as an external standard. The calibration curves for quantification of crystal content were based upon the total relative intensity of four diffraction peaks from of the form g crystal. FT-NIR spectra of six calibration sample sets were recorded 5 times with the NIR spectrometer (BRAN+LUEBBE). Chemoinfometric analysis was performed on the NIR spectral data sets by applying the principal component regression (PCR). [Results] The relation between the actual and predicted polymorphic contents of form g IMC measured using by the X-ray diffraction method shows a good straight linen linear relation., and it has slope of 0.023, an intercept of 0.131 and a correlation coefficient of 0.986. PCR analyses wereis was performed based on normalized NIR spectra sets offer standard samples of known content of IMC g form. IMC. A calibration equation was determined to minimize the root mean square error of the predictionthe prediction. Figure 1 shows a plot of the calibration data obtained by NIR method between the actual and predicted contents of form g IMC. The predicted values were reproducible and had a smaller standard deviation. Figure 2 shows that the plot for the predicted transformation rate (%) of form a IMC to form g as measured by X-ray diffractomeoy against to those as measured by NIR method. The plot has a slope of 1.296, an intercept of 1,109, and a correlation coefficient of 0.992. The line represents a satisfactory correlation between the two predicted values of form g IMC content. Thus NIR spectroscopy is an effective method for the evaluation to the pharmaceutical products of quantitative of polymorph.

• Journal of the Korean Society of Tobacco Science
• /
• v.33 no.1
• /
• pp.21-27
• /
• 2011

Amadori compounds(1-deoxy-1-amino-2-ketoses) are important precursors of color, flavor and aroma produced in foods. Amadori compounds occur naturally in tobacco. The contribution of amadori compounds to smoke quality has been (of) interest because of their roles of the Maillard reaction in the leaf chemistry. The amounts of these compound in tobacco are affected by the processes of aging, drying and storage conditions. In this study, eight compounds were chemically synthesized because amadori compounds (have not been sold commercially these days.) were not available for obtaining commercially. The aim of this study was to develop the analytical method of amadori compounds in tobacco leaf by the liquid chromatography mass spectrometry using triple quadrupole analyzer(LC-MS/MS). This method was simple, rapid, selective and sensitive, and eight amadori compounds were simultaneously and quantitatively analyzed within 20 minutes. This method showed excellent accuracy and precision. Recovery rates of amadori compounds ranged from 86% to 102%, with relative standard deviation(RSD) ranged from 2.6% to 5.9%. This method was applied to analysis of amadori compounds contents of tobacco leaves in different varieties. Furthermore, it was expected that the method could be extended to the analysis of other amadori compounds.