• Journal of environmental and Sanitary engineering
• /
• v.16 no.4
• /
• pp.62-68
• /
• 2001

The advantages of hydrogen peroxide dissolution method were no discharge of noxious matter when dissolution of iron wire which used as the center supporter, reactions occur in room temperature and easy to recover dissolved iron. This study was aimed at gathering the basic data of iron wire dissolution- recovery process and proposes the reaction condition of iron wire dissolution- recovery process rind the factors influencing those reactions. The results were as follows : 1 . Hydrogen peroxide dissolution method used hydrochloric acid as the catalyst. 1. In the dissolution of iron wire(1.668 g), the condition of reaction was E1702(30 ml), HCI(20 ml) and $H_2O$(200 ml) ; time of the reaction was 18 min. P.W.(Piece weight) was 7.75 mg, and C.R. was $2.34{\;}{\Omega}$ 2. In the dissolution of iron wire(1.529 g), the condition of reaction was H7O2(30 ml), HCI(20 ml) and $H_2O$(200 ml), time of the reaction was 21 min., P.W.(Piece weight) was 7.73 mg, and C.R. was $2.35{\;}{\Omega}$. Hydrogen peroxide dissolution method used sulfuric acid as the catalyst. 1. In the dissolution of iron wire(0.834 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and 1702(5 ml) ; time of the reaction was 5 min.30 sec, P.W.(Piece weight) was 7.74 mg, and C.R. was $2.33{\;}{\Omega}$ 2. In the dissolution of iron wire(1.112 g), the condition of reaction was $H_2O$(65 ml), $H_2SO_4$(5 ml) and $H_2O_2$(5 ml) ; time of the reaction was 4 min.30 sec, P.W.(Piece weight) was 7.75 mg, and C.R. was $2.33{\;}{\Omega}$. Hydrogen peroxide dissolution method used hydrochloric acid and sulfuric acid as the catalyst confirmed a clean technology, because there were not occurred a pollutant discharged in the existing method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.526-532
• /
• 2015

In order to relieve limitation of flight operation under icing condition and verify its operation in adverse weather condition for Surion, military helicopter developed in Korea, airworthiness certification in icing condition is required. The process of Surion icing certification should be considered by implementation of four methods by step such as CFD analysis, simulated flight tests, artificial icing flight tests, and natural icing flight tests. For Surion icing flight tests, these are required 20~30 sorties and 20~23 hours in artificial icing condition; 20~30 sorties and 20~22 hours in natural icing condition. In addition, to proceed with efficient flight tests, it is necessary to implement artificial icing flight tests in LWC $0.5{\sim}1.0g/m^3;$ natural icing flight tests in less than LWC $0.5g/m^3$.

• Journal of Technologic Dentistry
• /
• v.33 no.1
• /
• pp.47-54
• /
• 2011

Purpose: To investigate shear bonding strength between dental zirconia ceramics with different surface treatment and metal bracket. Methods: Zirconia ceramics(LAVA, 3M ESPE, USA) were divided to 4 groups according to their surface treatment; no surface treatment(G1), sand blasting(G2), silane coating(G3), and sand blasting+silane coating(G4). Specimens were bonded to metal bracket using resin bond($Transbond^{TM}XT$, 3M Unitek, USA). Shear bond strength was measured using universal test machine(3366 INSTRON. U.S.A) with cross head speed of 1 mm/min. Microstructural investigation for fracture surface was performed after shear test. Results: Shear bonding strengths of single surface treatment groups (G2 and G3) were higher than no treatment group(G1). Combined Treatment Group (G4) showed the highest shear bond strength of 9.15MPa. Microstructural observation shows that higher shear bonding strength was obtained when debonding was occurred at metal bracket/resin interface rather than zirconia ceramic/resin interface. Conclusion: Surface treatment of zirconia is necessary to obtain higher bonding strength. Combined treatment can be more effective when surface the surfaces are kept clean and homogeneous.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1109-1116
• /
• 2010

In this paper, some performance characteristics of VoIP(Voice over Internet Protocol) for MANET(Mobile Ad-hoc Networks) with simulation is studied and appropriate condition for implementation of VoIP service is suggested. VoIP simulator is implemented with NS(Network Simulator)-2. VoIP traffic for simulation is generated with some codecs of G.711, G.723.1, G.726-32, G.729A, GSM.AMR and iLBC. As simulation results for traffic transmission under $670{\times}670m$ 50node MANET environment, performance data for MOS(Mean Opinion Score), network delay, packet loss rate and transmission bandwidth are measured. Normalized analysis about measured results shows that maximum VoIP connection satisfying VoIP service quality condition is 15.

• The Korean Journal of Mycology
• /
• v.50 no.3
• /
• pp.161-171
• /
• 2022

The edible paddy straw mushroom Volvariella volvacea (Bull. ex F.) Singer has high nutritional and medicinal values. They are grown on a wide variety of agricultural by-products using different several methods. The result of this present study showed that type of bed and cultivation condition (outdoor/indoor) had effects on the yield of paddy straw mushrooms grown on the spent oyster mushroom sawdust. The treatment of circular compact bed under indoor cultivation condition (CYIC) had the best yield and biological efficiency (B.E.) with 2,119.2 g/bed and 14.5%, respectively, followed by the treatment of conventional bed under outdoor cultivation condition (COOC) with the yield and B.E. of 1,935.5 g/bed and 13.2%, respectively, but the lowest yield and B.E. were observed in the treatment of conventional bed under indoor cultivation condition (COIC) with 1,226.1 g/bed and 8.4%, respectively. Paddy straw mushrooms cultivated on spent oyster mushroom sawdust should be proper in both outdoor and indoor conditions by conventional and circular compact methods as well. However, in indoor conditions, paddy straw mushrooms should be grown in a circular compact bed to ensure the temperature of the bed is suitable for the mushroom growth.

• Korean Journal of Environment and Ecology
• /
• v.29 no.1
• /
• pp.29-45
• /
• 2015

Water chemistry and fish community, based on fish compositions and ecological characteristics(trophic/tolerance guilds and condition factor), were compared in Gucheon Reservoir($G_cR$) and Yeoncho Reservoir($Y_cR$). Chemical parameters of water quality such as BOD, COD, nutrient(N, P) and suspended solids indicated that water quality was better in the $Y_cR$ than $G_cR$, and the temporal variability in seasonal and interannual patterns were greater in the $Y_cR$. The greater variability was mainly attributed to intense dilutions of reservoir water by Asian monsoon rain during July-August. Fish guild analysis indicated that species diversity was higher in the $G_cR$ than the $Y_cR$, and that the proportion of tolerant and omnivore species were greater in the $Y_cR$. Regression analysis of body weight-total length showed that the regression coefficient(b value) was lower in the $G_cR$(2.15 ~ 2.40) than the $Y_cR$(2.59 ~ 3.14). Condition factor(K) of fish against the total length showed negative slope of Zacco temminckii, Carassius auratus, Pseudorasbora parva and Rhinogobius brunneus population in the $G_cR$, and a positive slope of Carassius auratus and Rhinogobius brunneus population in $Y_cR$. Overall, our data suggest that the growth of the fish populations, based on the length-weight relations and condition factor, reflected the trophic regime of nutrients and organic matter.

• Journal of the Korean Society of Tobacco Science
• /
• v.27 no.1 s.53
• /
• pp.100-106
• /
• 2005

To obtain the optimum condition for analysis of 10 alkaloids in tobacco leaves, such as nicotine, nornicotine, anatabine, anabasine, myosmine, cotinine, 2,3'-dipyridyl, $\beta-nicotyrine,\;\beta-nornicotyrine\;and\;\beta-formylnornicotin$, 5 types of extraction method were investigated by GC-FID and GC/MS. The optimum condition of alkaloid extraction was achieved by using methanol:dichloromethane(1:3, v/v) after NaOH treatment. The use of mass selective detector (MSD) provided unambiguous nicotine related alkaloid analysis. Alkaloids in various tobacco leaves were extracted with the optimum extraction condition and quantified by GC/MS/SIM mode. Compared with concentrations of alkaloids among the various tobacco leaves, the concentration of alkaloids was generally in the order burley > flue-cured > oriental tobacco. In flue-cured tobacco leaves, the order of concentration of alkaloids was nicotine > anatabine > nornicotine > $\beta-nicotyrine\;>\;\beta-formylnornicotine\; >\;myosmine\;>\;2,3'-dipyridyl\;>\;cotinine\;>\;anabasine\;>\;\beta-nornicotyrine$. However, in the case of burley and oriental tobacco leaves, the concentration of nornicotine was higher than that of anatabine.

• Korean Journal of Human Ecology
• /
• v.12 no.5
• /
• pp.747-754
• /
• 2003

The actual clothing conditions were surveyed to diagnose clothing condition of Korean female in the view point of the adaptation to the thermal environment according to seasonal changes. Then, clothing microclimate, physiological responses, and subjective sensation were investigated through wearing trials on human body in climatic chamber based on the results from the survey. Factors to evaluate validity of clothing condition were clothing weight, clothing microclimate, physiological response of human body, and subjective sensation. The results were as follows: 1. Clothing weight per body surface area of the season was $856g/m^{2}$, $439g/m^{2}$ in summer, $630g/m^{2}$ in fall, and $1184g/m^{2}$ in winter. Cold - resistance of Korean female in office was superior to Japanese, inferior to residents of rural areas of Korea, and similar to male in office. However, in heat - resistance, female in office was inferior to residents of rural areas of Korea. 2. In spring, fall, winter, clothing microclimate temperature was a little higher than that in summer. Therefore, it was not a desirable wearing condition even though the clothing microclimate was comfortable zone. 3. Mean skin temperature of female in office was including within the range of Winslow's comfortable zone, but the range of comfortable zone in mean skin temperature of female was more narrow than Winslow's. Thus, it has problem for female to adaptation to thermal environment.

• Journal of Korea Foundry Society
• /
• v.10 no.4
• /
• pp.332-341
• /
• 1990

The structure and tensile properties of the unidirectionally solidified Al-33wt.%Cu alloy have been investigated. Casted Al-33wt.%Cu alloy was unidirectionally solidified with rates (R) between 1㎝/hr and 24cm/hr maintaining the thermal gradient(G) at solid-liquid interface, $32^{\circ}C/cm$ and $21^{\circ}C/cm$. The entectic struture was varied according to the growth condition(G/R radio). When G/R ratio was larger than $8.5{\times}10^3$ $^{\circ}C/cm^2/sec$ the lamellar structure was formed, and colony structure was formed when G/R ratio was smaller than $8.5{\times}10^3$ $^{\circ}C/cm^2/sec$. The interlamellar spacing(${\gamma}$) in the above alloy system was vaired with the growth rate(R) According to "${\gamma}^2{\cdot}R＝8.8{\times}10＾{-11}cm^2/sec$" relationship. The yield stress (${\sigma}$0.001) and UTS for samples in the as-grown condition increased with the interlamellar spacing decrease and the values corresponding to colony structure are lower than those corresponding to amellar structure with the same lamellar spacing. The yield stress for samples in aged condition did not change with the interlamellar spacing.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.2
• /
• pp.40-45
• /
• 2004

The experimental results of the G-M (Gifford-McMahon) type pulse tube refrigerators are presented in this paper. The pulse tube refrigerator, which has no moving parts at its cold section, is attractive in obtaining higher reliability, simpler construction, and lower vibration than any other small refrigerators. The objectives of this study are to develop the design technology of the G-M type pulse tube refrigerator and acquire its application methods for replacing G-M cryocooler. As a preliminary test, the refrigeration performances of the basic, orifice, and double inlet pulse tube refrigerators were investigated. The lowest temperature obtained in the one-stage pulse tube refrigerator was 34.4K and the refrigeration capacity at the optimum operation condition was 23W at 80K. And the lowest temperature of the second stage cold head in the two-stage pulse tube refrigerators was 18.3K and the refrigeration capacities at optimum condition were 0.45W at 20K and 20W at 80K, respectively. Finally, the lowest temperature obtained in the three-stage pulse tube refrigerator was 29.8K and the refrigeration capacity at the optimum operation condition was 1.3W for 40K and 5W for 70K.