• Korean Journal of Breeding Science
• /
• 제42권6호
• /
• pp.615-622
• /
• 2010

A new rice cultivar, 'Joami', was developed by the rice breeding team of Sangju Substation, National Institute of Crop Science (NICS), Rural Development Administration. It was selected by a bulk and pedigree methods from a cross-combination among 'Sambaegbyeo', 'Yukara', and 'Tonggae112'. A promising line of YR20557-1-1-3-B-3 was designated as 'Sangju 36' in 2006. Local adaptability test of 'Sangju 36' was conducted at ten sites throughout the Korean peninsula during three years from 2006 to 2008. 'Sangju 36', thereafter, was registered as 'Joami' in 2008. The cultivar headed on July 30 in the test of local adaptability. Endosperm of 'Joami' is translucent with clear chalkiness and has 5.4% higher head rice ratio than that of 'Odaebyeo'. The yield potential of 'Joami' in milled rice is about 5.40 MT/ha under ordinary fertilizer level of local adaptability test, which was 6% higher than that of 'Odaebyeo'. In an alpine area of Korea, the rice variety needs a cold tolerance and a resistance to blast disease. 'Joami' showed a tolerance reaction at Chuncheon cold tolerance screening nursery and exhibited resistance reaction to blast disease in nation-wide disease screening nursery. Therefore, 'Joami' would be well adaptable to mid-mountainous area at central and southern part of Korean peninsula.

• Korean Journal of Breeding Science
• /
• 제42권3호
• /
• pp.257-261
• /
• 2010

'Manmibyeo', a new japonica rice cultivar, is a mid-late maturing ecotype cultivar developed by the rice breeding team of Department of Functional Crop, NICS, RDA in 2002. This cultivar was originated from the cross between 'Milyang 95' and $F_1$ of the cross between 'Bukrukbanna' and 'Milyang 95' in 1990/1991 winter season. It was selected by pedigree breeding method until F6 generation, and a promising line, YR14545-9-2-3-4, was advanced and designated as 'Milyang 162' in 1996. The local adaptability test of 'Milyang 162' was carried out at seven locations during 3 years in 1997, 1998 and 2002. It has about 86cm culm length and is lodging tolerant. This cultivar is susceptible to bacterial blight ($K_1$, $K_2$, $K_3$) and stripe virus, and moderately resistant to leaf blast disease. Milled rice kernels of 'Manmibyeo' is translucent with low amylose content in endosperm, clear in chalkiness and good at eating quality in panel test. The yield potential of 'Manmibyeo' in milled rice was about 4.46 MT/ha at ordinary fertilizer level in local adaptability test. This cultivar would be adaptable to the southern plain of Korea.

• Journal of the Korean Institute of Landscape Architecture
• /
• 제47권4호
• /
• pp.50-60
• /
• 2019

In the late 1980s, a financial crisis and Compulsory Competitive Tendering (CCT) in green space services brought with it a profound impact on the quality of parks in the UK. Such government projects, e.g. Urban Task Force (1999) and Public Parks Assessment (2001), aimed to raise the awareness of the severity of the declining standards of urban parks. Since the late 1990s, the UK governments (The New Labour (1997-2010) and The Conservative Government (2010-2019)), have often adopted community-led governance schemes to enhance the quality of parks and address problems derived from the financial crisis. Accordingly, community groups, notably 'Friends of', enlarged their involvement in the decision-making process of park management. However, there is little empirical evidence concerning the impact of community-led governance on park management, in particular, the effect on the users' perceptions of park use. This study explored the context of community-led park management to reclassify the level of build-up of governance underlined by 'A Ladder of Citizen Participation'. In addition, questionnaire surveys were conducted around two Sheffield district parks, which are located in deprived areas. As a result, community involvement in the status quo of UK urban park management has changed its form of governance based on the extent of involvement in the decision-making process. The forms of governance could be categorised in three levels: general, active, and predominant governance, where the extents of decision-making and sharing responsibility vary. The results obtained through the questionnaires show that one park (active governance), which has a stronger tendency of sharing responsibility to get involved in park management, had better contribution to park management and positive impacts on users' satisfaction than the other park (general governance). The findings highlight that stronger governance in partnerships with the non-public sectors can shed light on current and future park management through a shift in sharing responsibility for park management.

• Journal of Food Hygiene and Safety
• /
• 제34권1호
• /
• pp.30-39
• /
• 2019

An analytical method was developed for the determination of sedaxane in agricultural products using liquid chromatograph-tandem mass spectrometry (LC-MS/MS). The samples were extracted with acetonitrile and partitioned with dichloromethane to remove the interference, and then purified by using silica SPE cartridges to clean up. The analytes were quantified and confirmed by using LC-MS/MS in positive ion mode using multiple reaction monitoring (MRM). The matrix-matched calibration curves were linear over the calibration ranges ($0.001-0.25{\mu}g/mL$) into a blank extract with $r^2$>0.99. For validation, recovery tests were carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ, n=5) with five replicates performed at each level. The recoveries were ranged between 74.5 to 100.8% with relative standard deviations (RSDs) of less than 12.1% for all analytes. All values were consistent with the criteria ranges requested in the Codex guidelines (CAC/GL 40, 2003) and Food Safety Evaluation Department guidelines (2016). The proposed analytical method was accurate, effective and sensitive for sedaxane determination in agricultural commodities.

• Korean Journal of Psychosomatic Medicine
• /
• 제26권2호
• /
• pp.77-85
• /
• 2018

Objectives : This study aimed to investigate the level of distress using the distress thermometer (DT) and the factors associated with distress in postoperative breast cancer (BC) patients. Methods : DT and WHOQOL-BREF (World Health Organization Quality of Life Scale Abbreviated Version) along with sociodemographic variables were assessed in patients undergoing surgery for their first treatment of BC within one week postoperatively. The distress group consisted of participants with a DT score ${\geq}4$. The prevalence and associative factors of distress were examined by descriptive, univariable, and logistic regression analysis. Results : Three hundred seven women were recruited, and 264 subjects were finally analyzed. A total of 173 (65.5%) were classified into the distress group. The distress group showed significantly younger age (p=0.045), living without a spouse (p=0.032), and worse quality of life (QOL) as measured by overall QOL (p=0.009), general health (p=0.005), physical health domain (p<0.000), and psychological health domain (p=0.002). The logistic regression analysis showed that patients aged 40-49 years were more likely to experience distress than those aged ${\geq}60years$ (Odds ratios [OR]=2.992, 95% confidence interval [CI] 1.241-7.215). Moreover, the WHOQOL-BREF physical health domain was a predictive factor of distress (OR=0.777, 95% CI 0.692-0.873). Conclusions : A substantial proportion of patients are experiencing significant distress after BC surgery. It would be expected that distress management, especially in the middle-aged patients and in the domain of physical QOL (e.g., pain, insomnia, fatigue), from the early BC treatment stage might reduce chronic distress.

• Korean Journal of Agricultural and Forest Meteorology
• /
• 제21권3호
• /
• pp.167-174
• /
• 2019

A process-oriented crop growth model can simulate the biophysical process of rice under diverse environmental and management conditions, which would make it more versatile than an empirical crop model. In the present study, we examined chronology and background of the development of the rice growth models in Korea, which would provide insights on the needs for improvement of the models. The rice crop growth models were introduced in Korea in the late 80s. Until 2000s, these crop models have been used to simulate the yield in a specific area in Korea. Since then, improvement of crop growth models has been made to take into account biological characteristics of rice growth and development in more detail. Still, the use of the crop growth models has been limited to the assessment of climate change impact on crop production. Efforts have been made to apply the crop growth model, e.g., the CERES-Rice model, to develop decision support system for crop management at a farm level. However, the decision support system based on a crop growth model was attractive to a small number of stakeholders most likely due to scarcity of on-site weather data and reliable parameter sets for cultivars grown in Korea. The wide use of the crop growth models would be facilitated by approaches to extend spatial availability of reliable weather data, which could be either measured on-site or estimates using spatial interpolation. New approaches for calibration of cultivar parameters for new cultivars would also help lower hurdles to crop growth models.

• Korean Journal of Agricultural and Forest Meteorology
• /
• 제22권4호
• /
• pp.268-278
• /
• 2020

Flowering time has been put forward due to the recent abnormally warm winter, which often caused damages of flower buds by late frosts persistently. In the present study, cumulative chill unit and cumulative heat unit of Niitaka pear, which are required for releasing the endogenous dormancy and for flowering after breaking dormancy, respectively, were compared between flowering time prediction models used in South K orea. Observation weather data were collected at eight locations for the recent three years from 2018-2020. The dates of full bloom were also collected to determine the confidence level of models including DVR, mDVR and CD models. It was found that mDVR model tended to have smaller values (8.4%) of the coefficient of variation (cv) of chill units than any other models. The CD model tended to have a low value of cv (17.5%) for calculation of heat unit required to reach flowering after breaking dormancy. The mDVR model had the most accurate prediction of full bloom during the study period compared with the other models. The DVR model usually had poor skills in prediction of full bloom dates. In particular, the error of the DVR model was large especially in southern coastal areas (e.g., Ulju and Sacheon) where the temperature was warm. Our results indicated that the mDVR model had relatively consistent accuracy in prediction of full bloom dates over region and years of interest. When observation data for full bloom date are compiled for an extended period, the full bloom date can be predicted with greater accuracy improving the mDVR model further.

• Korean journal of applied entomology
• /
• 제61권1호
• /
• pp.155-163
• /
• 2022

The application of fungicides is indispensable to global food security, and their use has increased in recent times. Fungicides, directly or indirectly, have impacted insects, leading to genetic and molecular-level changes. Various detoxification mechanisms allow insects to eliminate reactive oxygen species (ROS) toxicity induced by agrochemicals including fungicides. In the present study, we analyzed the mRNA expression levels of detoxifying enzymes in Tenebrio molitor larvae following exposure to non-lethal doses (0.2, 2, and 20 ㎍/µL) of a fungicide captan. Transcripts of peroxidases (POXs), catalases (CATs), superoxide dismutases (SODs), and glutathione-s-transferases (GSTs) were screened from the T. molitor transcriptome database. RT-qPCR analysis showed that TmPOX5 mRNA increased significantly 24 h post-captan exposure. A similar increase was noticed for TmSOD4 mRNA 3 h post-captan exposure. Moreover, the expression of TmCAT2 mRNA increased significantly 24 h post-treatment with 2 ㎍/µL captan. TmGST1 and TmGST3 mRNA expression also increased noticeably after captan exposure. Taken together, these results suggest that TmPOX5 and TmSOD4 mRNA can be used as biomarkers or xenobiotics sensors for captan exposure in T. molitor, while other detoxifying enzymes showed differential expression.

• Journal of the Korean Society of Tobacco Science
• /
• 제24권1호
• /
• pp.67-73
• /
• 2002

In light of addressing consumer health concern, coping with anti-tobacco movement, and promoting new product, tobacco industry is actively pursuing to make a new generation of cigarettes with low tar and nicotine deliveries, and less harmful substances. Low tar and low nicotine cigarettes increases their market shares dramatically world wide, especially in KT&G, multinational tobacco companies, EU countries, even in China regulated by CNTC to set up yearly target to lower tar and nicotine deliveries. On the other hand, to design a new cigarette with reduced harmful substances begins to gain speed. The "modified Hoffmann list" publishes thirty plus substances in tobacco leaf and main smoke stream, which is the prime suspect causing health problems. Various ways and means are developed to reduce such components including new tobacco breeds, new curing method, tobacco leaf treatment before processing, selected filtration system, innovated casing system to reduce free radicals, as well as some non conventional cigarette products. In TSRC held this year, the main topic is related to reduce tobacco specific nitrosamines in tobacco leaf. The new generation of cigarette is in the horizon. It still needs a lot help to produce commercial products with satisfied taste and aroma characters. The flavor industry is not regulated by many governments demanding which ingredients might or might not be for tobacco use. However, most of the cigarette companies self impose a list of ingredients to guide flavor suppliers to design flavors. Unfortunately, the number of ingredients in those lists is getting shorter every year. It is understandable that the health is not the only reason. Some cigarette companies are playing safe to protect the company from potential lawsuit, while others are just copying from their competitors. Moreover, it is obvious that it needs more assistance from casings and flavors to design new generation of cigarettes with missing certain flavor components in tobacco leaf and main smoke stream. These flavor components are either non-existed or at lower level at new form of cured tobacco leaf or filtered in the main smoke stream along with reduced harmful substances. The use of carbon filters and other selected filtration system poses another tough task for flavor system design. Specific flavor components are missing from the smoke analysis data, which brings a notion of "carbon taste" and "dryness" of mouth feel. It is ever more demanded by cigarette industry to flavor suppliers to produce flavors as body enhancer, tobacco notes, salivating agents, harshness reducer, and various of aromatic notes provided they are safe to use. Another trend is that water based flavor or flavor with reduced ethanol as solvent is gaining popularity. It is preferred by some cigarette companies that the flavor is compounded with all natural ingredients or all ingredients should he GMO free. The new generation of cigarettes demands many ways of new thinking process. It is also vital for tobacco industry. It reflects the real needs for the consumers that the cigarette product should be safe to use as well as bearing the taste and aroma characters smokers always enjoyed. An effective tobacco flavor system is definitely a part of the equation. The global trend of tobacco industry is like trends of any other industries lead by consumer needs, benefited with new technology availability, affected by the global economy, and subjected for various rules and regulations. Anti-tobacco organizations and media exceptionally scrutinize cigarette, as a legal commercial product. Cigarette is probably the most studied commercial product for its composition, structure, deliveries, effects, as well as its new developmental trend. Therefore, any new trend of cigarette development would be within these boundaries. This paper is trying to point out what it would be like for tobacco industry in the next few yews and what concerns the tobacco industry. It focuses mostly on the efforts to produce safer cigarettes. It is such a vital task for the tobacco industry and its affiliate industries such as cigarette papers, filters, flavors, and other materials. The facts and knowledge presented in this paper might be well known for the public. Some of the comments and predictions are very much personal opinion for a further discussion.

• Journal of Environmental Health Sciences
• /
• 제49권2호
• /
• pp.66-77
• /
• 2023

Background: Along with the increase in consumer interest in and consumption of tattoo products, the controversy over harmful heavy metals associated with the use of tattoo cosmetics is also increasing. Therefore, investigation of hazardous metals in these tattoo products is needed. Objectives: This study was performed to provide useful data for establishing reasonable standards to securely manage tattoo cosmetics, tattoo stickers, and tattoo inks distributed in the market. Methods: Thirteen kinds of hazardous metal contents (Pb, As, Cd, Sb, Ni, Co, Cu, Cr, Se, Ba, Zn, Sn, and Hg) were analyzed for 23 tattoo cosmetics, ten tattoo stickers, and 16 tattoo inks. Hg was measured through the combustion-gold amalgamation method, and other hazardous metals were measured by inductively coupled plasma-mass spectrometry (ICP-MS) after acidic decomposition using a microwave apparatus. Results: The detected ranges of Pb, As, Cd, Sb, Ni, and Hg in tattoo cosmetics were 0.07~1.18, 0.06~0.41, ND~0.07, 0.01~3.44, 0.12~2.75, and ND~0.01 ㎍/g, respectively. All of the hazardous metals detected were below the recommended maximum standards of the Ministry of Food and Drug Safety. The mean amount of Pb detected in tattoo stickers for children was 0.24 ㎍/kg and Cd was not detected, meaning both metals met the recommended criteria. There was no statistically significant difference in all measured metals between children's tattoo stickers and adults' tattoo stickers. In the results of the study on the hazardous metal content of tattoo inks, four products (25%) for Pb, one product (6%) for As, 13 products (81%) for Ni, four products (25%) for Cu, and five products (31%) for Zn exceeded the recommended standards approved by the government. The highest predicted exposure amount for hazardous metals exceeding the recommended level of tattoo inks in a single tattooing was 5.69 ㎍/kg for Ni, 8.51 ㎍/kg for Zn, 0.44 ㎍/kg for Pb, 8.07 ㎍/kg for Cu, 0.44 ㎍/kg for As, and 71.36 ㎍/kg for Ba. Conclusions: It is necessary to prepare criteria for content limitation for the management of Co, Cr, Ba and Se tattoo cosmetics, and tattoo inks require thorough quality control.