• 멤브레인
• /
• 제10권2호
• /
• pp.55-65
• /
• 2000

다공성 실리카 막을 졸겔법에 의해서 Si(${OC}_2H_5)_4-H_2O$ 로부터 제조하고, 막의 특성을 TG-DTA, XRD, IR, BET, SEN, TEM을 사용하여 조사하였다. 다공성 실리카 막 제조를 위한 Si(${OC}_2H_5)_4$ : $H_2O4$ : $H_2O$ : $C_2H_5{OH}$의 최적 몰비는 1 : 4.5 : 4 이었다. 100$^{\circ}C$~1100$^{\circ}C$~에서 열처리된 막의 비표면적은 3.8 $m^2$/g~902.3$m^2$/g 이었으며, 기공크기는 20$\AA$~50$\AA$이었다. 300$^{\circ}C$~~700$^{\circ}C$~범위에서 열처리된 막의 입자크기는 15nm~30nm이며, 열처리 온도가 증가하면 입자의 크기도 증가하였다. 이렇게 제조한 다공성 실리카 막으로 $H_2$/$N_2$ 혼합기체를 분리하는데 응용하였으며, 다공성 실리카 막에 의한 $H_2$/$N_2$혼합기체분리는 Knudsen flow와 surface flow에 의해서 일어나며 주로 surface flow에 의존하였다. 다공성 실리카 막의 $H_2$/$N_2$ 혼합기체에 대한 real separation factor($\alpha$)는 155.15 cmHg($\Delta$P)와 $25^{\circ}C$에서 5.17이었으며, real separation factor($\alpha$), head separation factor ($\beta$), tail separation factor$\bar{B}$)는 압력이 증가하면 증가하였다.

• 멤브레인
• /
• 제6권4호
• /
• pp.284-288
• /
• 1996

본 연구는 가교된 PVA/PAA 막을 이용하여 5와 12wt%를 포함하는 물-이소프로필알코올 계에 대한 투과증발 실험을 60, 70 및 $80^{\circ}C$의 조업온도에서 수행하였다. PVA/PAA=75/25 막을 사용했을 경우 공급액의 조성이 물 12wt%에서 투과도 및 선택도가 온도 $80^{\circ}C$에서 $63g/m^{2}h$과 1520을 각각 나타내었으며, 물 5wt%에서는 같은 온도에서 투과도는 $56g/m^{2}h$을 그리고 선택도는 1563을 얻었다.

• Macromolecular Research
• /
• 제11권4호
• /
• pp.267-272
• /
• 2003

The isothermal cure reactions of blends of epoxy (DGEBA, diglycidyl ether of bisphenol A)/anhydride resin with polyamide copolymer (poly(dimmer acid-co-alkyl polyamine)) or PEI were studied using differential scanning calorimetry (DSC). Rheological measurements have been made to investigate the viscosity and mechanical relaxation behavior of the blends. The reaction rate and the final cure conversion were decreased with increasing the amount of thermoplastics in the blends. Lower values of final cure conversions in the epoxy/thermoplastic blends indicate that thermoplastics hinder the cure reaction between the epoxy and the curing agent. Complete miscibility was observed in the uncured blends of epoxy/thermoplastics up to $120^{\circ}C$ but phase separations occurred in the early stages of the curing process at higher temperatures than $120^{\circ}C$. According to the rheological measurement results, a rise of G' and G" at the onset of phase separation is seen. A rise of G' and G" is not observed for neat epoxy system since no phase separation is seen during cure reaction. At the onset of phase separation the rheological behavior was influenced by the amount of thermoplastics in the epoxy/thermoplastic blends, and the onset of phase separation can be detected by rheological measurements.

• 한국경영과학회지
• /
• 제36권2호
• /
• pp.43-50
• /
• 2011

We consider the separation problem of the rank-1 Chvatal-Gomory (C-G) inequalities for the 0-1 knapsack problem with the knapsack capacity defined by an additional binary variable, which we call the fixed-charge 0-1 knapsack problem. We analyze the structural properties of the optimal solutions to the separation problem and show that the separation problem can be solved in pseudo-polynomial time. By using the result, we also show that the existence of a pseudo-polynomial time algorithm for the separation problem of the rank-1 C-G inequalities of the ordinary 0-1 knapsack problem.

• Archives of Pharmacal Research
• /
• 제4권1호
• /
• pp.1-8
• /
• 1981

Our need for a convenient method of analytical estimation of the precise optical purity of d-2 aminobutanol (d-2AB) and d-ethambutol has prompted us to examine in detail the preparation and G. L. C. separation of the N-TFA-L-prolyl derivatives of their optical isomers (d-and l-2AB, d-, meso-and l-ethambutol). Silicon OV-1 columns were used for the G. L. C. separation.

• 대한산업공학회지
• /
• 제38권2호
• /
• pp.74-79
• /
• 2012

An efficient separation heuristic for the rank-1 Chvatal-Gomory cuts for the binary knapsack problem is proposed. The proposed heuristic is based on the decomposition property of the separation problem for the fixedcharge 0-1 knapsack problem characterized by Park and Lee [14]. Computational tests on the benchmark instances of the generalized assignment problem show that the proposed heuristic procedure can generate strong rank-1 C-G cuts more efficiently than the exact rank-1 C-G cut separation and the exact knapsack facet generation.

• 한국재료학회지
• /
• 제31권11호
• /
• pp.593-600
• /
• 2021

Herein, a series of g-C₃N₄ modified Bi₂MoO₆ nanocomposites using Bi₂MoO₆ and melamine as original materials are fabricated via sintering process. For presynthesis of Bi₂MoO₆ an ultrasonic-assisted hydrothermal technique is researched. The structure and composition of the nanocomposites are characterized by Raman spectroscopy, X-ray diffraction (XRD), and high-resolution field emission scanning electron microscopy (SEM). The improved photoelectrochemical properties are studied by photocurrent density, EIS, and amperometric i-t curve analysis. It is found that the structure of Bi₂MoO₆ nanoparticles remains intact, with good dispersion status. The as-prepared g-C₃N₄/Bi₂MoO₆ nanocomposites (BMC 5-9) are selected and investigated by SEM analysis, which inhibits special morphology consisting of Bi₂MoO₆ nanoparticles and some g-C₃N₄ nanosheets. The introduction of small sized g-C₃N₄ nanosheets in sample BMC 9 is effective to improve the charge separation and transfer efficiency, resulting in enhancing of the photoelectric behavior of Bi₂MoO₆. The improved photoelectronic behavior of g-C₃N₄/Bi₂MoO₆ may be attributed to enhanced charge separation efficiency, photocurrent stability, and fast electron transport pathways for some energy applications.

• 멤브레인
• /
• 제13권4호
• /
• pp.291-299
• /
• 2003

PTMSP-PEI와 PDMS-PEI 복합막을 제조하고, 막의 특성을 FT-IR, $^1H-NMR,$ DSC, TGA, GPC, SEM을 사용하여 조사하였다. 제조된 PTMSP의 수평균분자량 (equation omitted)은 477,920 이었고, 중량평균분자량 (equation omitted)은 673,329이었고, 유리전이온도 ($T_g$)는 $224^{\circ}C$이었다. 제조된 고분자 복합막들에 의한 $H_2/N_2$ 혼합기체분리는 $25^{\circ}C$에서 압력의 변화에 따라 조사되었다. PTMSP-PEI와 PDMS-PEI 복합막들의 수소에 대한 분리인자 (${\alpha}, {\beta},$ equation omitted)값은 투과셀의 압력이 증가하면 증가하였다. PTMSP-PEI 복합막의 수소에 대한 (${\alpha}, {\beta},$ equation omitted 값은 ${\Delta}P$ 30psi 와 $25^{\circ}C$에서 2.28, 1.17, 1.96이었고, PDMS-PEI 복합막의 (${\alpha}, {\beta}$ equation omitted 값은 3.70, 1.53, 2.42 이었다.

• Environmental Engineering Research
• /
• 제19권4호
• /
• pp.395-399
• /
• 2014

Operation characteristics of the sequencing batch reactor (SBR) process with electro-flotation (EF) as a solid liquid separation method (EF-SBR) were investigated. EF-SBR process showed excellent solid-liquid separation performance which enabled to separate biosolids from liquid phase within 30 min and to extend cyclic reaction time. Although influent organic loading rate was increased stepwise from 5 to 15 g COD/day, food to microorganisms (F/M) ratio could be maintained about 0.3 g COD/g VSS/day in EF-SBR because biomass concentration could be easily controlled at desired level by EF. However, it was impossible to increase biomass concentration at the same level in control SBR (C-SBR) process because solid-liquid separation by gravity settling showed a limitation at higher mixed liquor suspended solids (MLSS) concentration with 60 min of settling time. Total chemical oxygen demand (TCOD) removal efficiency of EF-SBR process was not decreased although influent organic loading rate became 3 times higher than initial value. However, it was seriously deteriorated in C-SBR process after increasing the rate over 10 g COD/day, which was accounted for insufficient organic removal by relatively higher food to microorganisms (F/M) ratio as well as biosolids wash-out by a limitation of gravity sedimentation.

• 멤브레인
• /
• 제23권5호
• /
• pp.360-366
• /
• 2013

Poly (vinylidene fluoride) (PVDF) poly (acrylonitrile) (PAN) 중공사막에 친수성 고분자인 poly (vinyl alcohol) (PVA)과 가교제인 poly (acrylic acid) (PAA)을 코팅하여 복합막을 제조하였다. 제조된 막의 투과특성평가를 위해 90 wt% 물-에탄올 혼합액에 대한 투과증발실험을 수행하였으며, 반응온도, PAA용액의 농도, 공급액의 온도변화에 따른 투과도 및 선택도를 측정하였다. 일반적으로 반응온도, PAA용액의 농도가 증가할수록 투과도는 낮아지고 선택도는 증가하는 경향을 보였으며, 공급액의 온도가 증가할수록 투과도는 증가하고 선택도는 낮아지는 경향을 보였다. 대표적으로 PVDF중공사 막은 투과도는 PAA 3 wt%, 반응온도 $60^{\circ}C$, 공급액 온도 $70^{\circ}C$에서 $502g/m^2hr$, 선택도는 PAA 11 wt%, 반응온도 $100^{\circ}C$, 공급액 온도 $50^{\circ}C$일 때, 218의 결과를 얻을 수 있었다.