• Journal of Korean Society of Steel Construction
• /
• v.24 no.1
• /
• pp.13-21
• /
• 2012

Recently, the development of high-strength thicker steel plate above 600MPa is becoming active due to the increase in both height and member size of architectural structure. However, such steel, which is being investigated in Korea nowadays, has possibility of limited practical application because of high design code strength and high-yield ratio. Therefore, this study performed the validation for the structural performance of beam-column with combined axial force and bending moment whether this beam-column might be attributable as an architectural purpose steel. This study was conducted from the result of monotonic loading test of beam-column, based on the material properties of low-yield, 600MPa class steel which was developed during 1988-1993 in Japan. This study might provide the fundamental database for practical research for these steel which are actively being tested in Korea.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.139-145
• /
• 2016

Disinfection of microorganisms using UV light is widely used in the field of water supply and wastewater treatment plant, In spite of high germicidal effect and relatively clean by-product, UV disinfection has fundamental defeat that is accumulation of fouling materials at the interface of water and lamp sleeve. Non-contact type of UV photoreactor which can avoid this fouling generation was developed and the experimental performance evaluation of the system was carried out in this study. Log inactivation rate of E. coli was selected as a disinfection index. The concentration of E. coli of second clarifier effluent was $8.2{\times}10^1-8.2{\times}10^3$ colony per mL and was well inactivated by the non-contact type of UV photoreactor. Under the UV intensity condition of $2.1-2.5mW/cm^2$, E. coli removal rate was observed in the range of 54 - 95% when the HRT was increased from 10 to 52 seconds. Experimental results showed that log inactivation of E. coli was proportional to UV dosage and $200mJ/cm^2$ of UV dose is expected for the 2.0 log inactivation of E. coli from the second clarifier effluent. Between the two parameters of UV intensity and contact time which are consist of UV dose, UV intensity was 4 times more effective than contact time.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.20.1-20.1
• /
• 2011

The nano-sized quantum structure has been an attractive candidate for investigations of the fundamental physical properties and potential applications of next-generation electronic devices. Metal nano-particles form deep quantum wells between control and tunnel oxides due to a difference in work functions. The charge storage capacity of nanoparticles has led to their use in the development of nano-floating gate memory (NFGM) devices. When compared with conventional floating gate memory devices, NFGM devices offer a number of advantages that have attracted a great deal of attention: a greater inherent scalability, better endurance, a faster write/erase speed, and more processes that are compatible with conventional silicon processes. To improve the performance of NFGM, metal nanocrystals such as Au, Ag, Ni Pt, and W have been proposed due to superior density, a strong coupling with the conduction channel, a wide range of work function selectivity, and a small energy perturbation. In the present study, bismuth metal nanocrystals were self-assembled within high-k $Bi_2Mg_{2/3}Nb_{4/3}O_7$ (BMN) films grown at room temperature in Ar ambient via radio-frequency magnetron sputtering. The work function of the bismuth metal nanocrystals (4.34 eV) was important for nanocrystal-based nonvolatile memory (NVM) applications. If transparent NFGM devices can be integrated with transparent solar cells, non-volatile memory fields will open a new platform for flexible electron devices.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2007

SDR technology is a fundamental wireless access technology that combines and accommodates multiple wireless communication standards in one transceiver system through just modifying software using modular communication platforms without any hardware modifications for RF and IF signal processing on the basis of high performance DSP devices. Various communication systems that are designed under diverse and complex network environments require the communication platforms on the basis of SDR supporting reorganization to guarantee simple and fast communication interfaces among the respective wireless networks. This paper introduces a main idea on the implementation of platform on the basis of SDR and a communication platform is designed for experiments that is composed of a DSP board with TMS320C6713 CPU, a FPGA board processing IF signals, and a module with RF transceiver processing wireless LAN frequency bandwidth. Various modulation schemes(BPSK, QPSK, and 16QAM) used in communication systems are applied and tested on the designed platform and the test results shows that it is possible to design a reconfigurable communication terminal platform.

• Journal of Korea Multimedia Society
• /
• v.10 no.1
• /
• pp.49-57
• /
• 2007

Recently, CMOS RF integration has been widely explored in the wireless communication area to save cost, power, and chip area. The direct conversion architecture, rather than a more conventional super-het-erodyne, has been an attractive choice for single-chip integration because of its many advantages. However, the direct conversion architecture has several fundamental problems to solve in achieving performance comparable to a super-heterodyne counterpart. In this paper, we describe a programmable filter for mobile communication terminals using a direct conversion architecture. The proposed filter can be implemented with the active-RC filter and programmed to meet the requirements of different communication standards, including GSM, DECT and WCDMA. The filter can be tuned to select a detail frequency by changing the gate voltage of the MOS resistors. The gain of the proposed architecture can be programmed from 27dB to 72dB using the filter gain and VGA in 3dB steps.

• Journal of Intelligence and Information Systems
• /
• v.13 no.3
• /
• pp.141-160
• /
• 2007

User interface has been regarded as a crucial issue to increase the acceptance of mobile services. In special, even though to what extent the machine as speaker communicates with human as listener in a timely and polite manner is important, fundamental studies to come up with these issues have been very rare. Hence, the purpose of this paper is to propose a methodology of estimating politeness level in a certain context-aware setting and then to design a context-aware system for polite mobile interface. We will focus on Korean language for the polite level estimation simply because the polite interface would highly depend on cultural and linguistic characteristics. Nested Minkowski aggregation model, which amends Minkowski aggregation model, is adopted as a privacy-preserving similarity evaluation for case retrieval under distributed computing environment such as ubiquitous computing environment. To show the feasibility of the methodology proposed in this paper, simulation-based experiment with drama cases has performed to show the performance of the methodology proposed in this paper.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.701-708
• /
• 2004

Existing contents-based video retrieval systems search by using a single method such as annotation-based or feature-based retrieval. Hence, it not only shows low search efficiency, but also requires many efforts to provide system administrator or annotator with a perfect automatic processing. Tn this paper, we propose an agent-based, and automatic and unified semantics-based video retrieval system, which support various semantics-retrieval of the massive video data by integrating the feature-based retrieval and the annotation-based retrieval. The indexing agent embodies the semantics about annotation of extracted key frames by analyzing a fundamental query of a user and by selecting a key-frame image that is ed by a query. Also, a key frame selected by user takes a query image of the feature-based retrieval and the indexing agent searches and displays the most similar key-frame images after comparing query images with key frames in the database by using the color-multiple-partition histogram techniques. Furthermore, it is shown that the performance of the proposed system can be significantly improved.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.47-54
• /
• 2005

One of the standard procedures of discontinuity survey is the joint set identification from the population of field orientation data. Discontinuity set identification is fundamental to rock engineering tasks such as rock mass classification, discrete element analysis, key block analysis. and discrete fracture network modeling. Conventionally, manual method using contour plot had been widely used for this task, but this method has some short-comings such as yielding subjective identification results, manual operations, and so on. In this study, the method of discontinuity set identification using genetic algorithm was introduced, but slightly modified to handle the orientation data. Finally, based on the genetic algorithm, we developed a FORTRAN program, Genetic Algorithm based Clustering(GAC) and applied it to two different discontinuity data sets. Genetic Algorithm based Clustering(GAC) was proved to be a fast and efficient method for the discontinuity set identification task. In addition, fitness function based on variance showed more efficient performance in finding the optimal number of clusters when compared with Davis - Bouldin index.

• Journal of Korea Multimedia Society
• /
• v.7 no.10
• /
• pp.1400-1411
• /
• 2004

Recently, explosion of internet user requires fundamental changes on the architecture of Web service system, from single server system to clustered server system, in parallel with the effort for improving the scalability of the single internet server system. But current cluster-based server systems are dedicated to the single application, for example, One-IP server system. One-IP server system has a clustered computing node with the same function and tries to distribute each request based on the If to the clustered node evenly. In this paper, we implemented the more useful application service platform. It works on shared clustered server(back-end server) with an application server(front-end server) for a particular service. An application server provides a particular service at a low load by itself, but as the load increases, it reconfigures itself with one or more available server from the shared cluster and distributes the load on selected server evenly We used PVM for an effective management of the clustered server. We found the implemented application service platform provides more stable and scalable operation characteristics and has remarkable performance improvement on the dynamic load changes.

• Journal of KIISE
• /
• v.41 no.12
• /
• pp.1018-1025
• /
• 2014

An ROP attack creates gadget sequences which consist of existing code snippets in a program, and hijacks the control flow of a program by chaining and executing gadget sequences consecutively. Existing defense schemes have limitations in that they cause high execution overhead, an increase in the binary size overhead, and a low applicability. In this paper, we solve these problems by introducing zero-sum defender, which is a fast and space-efficient mitigation scheme against ROP attacks. We find a fundamental property of gadget execution in which control flow starts in the middle of a function without a call instruction and ends with a return instruction. So, we exploit this property by monitoring whether the execution is abused by ROP attacks. We achieve a very low runtime overhead with a very small increase in the binary size. In our experimental results, we verified that our defense scheme prevents real world ROP attacks, and we showed that there is only a 2% performance overhead and a 1% binary size increase overhead in several benchmarks.