• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.59-68
• /
• 2000

This paper proposes efficient VLSI architectures for computation of the 2- D discrete wavelet transform (DWT). The two proposed VLSI architectures for the 2- D DWT are constructed based on block-based computation Each $M{\times}N$ ($N{\times}M$) block DWT is performed along the row (column) direction simultaneously, where M and N denote the number of filter taps and the number of columns (rows), respectively The proposed architectures compute the lowpass and highpass output sequences of the 1 - DWT along the row and column directions using a single architecture In alternate clock cycles Therefore the extra processing units required for the proposed architectures are much smaller than those of the conventional architectures They are modeled In very high speed Integrated circuit hardware description language (HIDL) and Simulated to show their functional validity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.4
• /
• pp.286-292
• /
• 2012

The lateral upper arm flap (LUAF) was initially described by in 1982 by Song et al. as a simple skin flap, addressing the availability of cutaneous nerves for anastomoses. Katsaros et al., reported the use of a lateral upper arm skin flap, but also considered using it as a composite graft. The LUAF for the oral and maxillofacial reconstruction has several advantages over other flaps, such as constant anatomy, good color match and texture, thin design and plasticity. There is no functional limitation in the donor arm, such as strength and extension, and donor defects can be closed primarily with a linear scar, even when a flap of up to 8 cm in width is taken. For a better understanding of LUAF as a routine reconstructive option in moderate defect of maxillofacial region, the constant anatomical findings must be learned and memorized by young doctors during the specialized training course for the Korean national board of oral and maxillofacial surgery. This article review the anatomical basis of LUAF with Korean language.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.47-54
• /
• 2013

In this paper, analyze the technical elements of the CTI system to design the proposed system, understand the requirements of CTI IP based system. in the Hearing-Impaired designed a CTI system of mobile phone-based services available to the CTI call center system based on this. Furthermore, we implemented voiceXML scenario data analysis modules using the JAVA language to implement the system was designed, the server provides. And an implementation of the CTI system of mobile phone base for the Hearing-Impaired by integrating the modules that have been implemented. Finally, create a scenario that uses the CTI system for mobile base to test and evaluation, based on the test scenario each functional, we conducted repeated tests. It was possible to confirm the results of time for the acquisition of the test result information has been reduced about 20 seconds on average than the audio system based on conventional.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.108-116
• /
• 1989

The simulator described here-LOSIM(LOgic SIMulator)-was developed to verify the logic design for VLSI(Very Large Scale Integrated) circuits at mixed level. In this paper, we present a modeling approach to obtain more accurate results than conventional logic simulators [5-6,9] for general elements, functional elements, transmission gates and tri-state gates using eight signal values and two gignal strengths. LOSIM has the capability which can perform timing and hazard analysis by using assignable rise and fall delays. We also prosent an efficient algorithm to accurately detectdynamic and static hazards which may be caused by the circuit delays. Our approach is based on five logic values and the scheduled time. LOSIM has been implemented on a UN-3/160 workstation running Berkeley 4.2 UNIX, and the program is written in C language. Static RAM cell and asynchronous circuit are illustrated as an example.

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.63-72
• /
• 2014

The current study assessed the utility of acoustic analyses the most commonly used in routine clinical voice assessment including perturbation, nonlinear dynamic analysis, and Spectral/Cepstrum analysis based on signal typing of dysphonic voices and investigated their applicability of clinical acoustic analysis methods. A total of 70 dysphonic voice samples were classified with signal typing using narrowband spectrogram. Traditional parameters of %jitter, %shimmer, and signal-to-noise ratio were calculated for the signals using TF32 and correlation dimension(D2) of nonlinear dynamic parameter and spectral/cepstral measures including mean CPP, CPP_sd, CPPf0, CPPf0_sd, L/H ratio, and L/H ratio_sd were also calculated with ADSV(Analysis of Dysphonia in Speech and VoiceTM). Auditory perceptual analysis was performed by two blinded speech-language pathologists with GRBAS. The results showed that nearly periodic Type 1 signals were all functional dysphonia and Type 4 signals were comprised of neurogenic and organic voice disorders. Only Type 1 voice signals were reliable for perturbation analysis in this study. Significant signal typing-related differences were found in all acoustic and auditory-perceptual measures. SNR, CPP, L/H ratio values for Type 4 were significantly lower than those of other voice signals and significant higher %jitter, %shimmer were observed in Type 4 voice signals(p<.001). Additionally, with increase of signal type, D2 values significantly increased and more complex and nonlinear patterns were represented. Nevertheless, voice signals with highly noise component associated with breathiness were not able to obtain D2. In particular, CPP, was highly sensitive with voice quality 'G', 'R', 'B' than any other acoustic measures. Thus, Spectral and cepstral analyses may be applied for more severe dysphonic voices such as Type 4 signals and CPP can be more accurate and predictive acoustic marker in measuring voice quality and severity in dysphonia.

• Phonetics and Speech Sciences
• /
• v.11 no.4
• /
• pp.109-116
• /
• 2019

This study was conducted to identify the characteristics of pauses and breath groups made by normal adults and patients with voice disorders while reading a paragraph. Forty normal female adults and forty female patients with a functional voice disorder (18-45 yrs.) read the "Gaeul" paragraph with the "Running Speech" protocol of the Phonatory Aerodynamic System (PAS), by which the pauses with or without inspiration and between or within syntactic words and breath groups were analyzed. The number of pauses with inspiration was found to be higher in the patient group, but the number of pauses without inspiration was higher in the normal group. The rate of syntactic word boundaries with pauses with inspiration was higher in the patient group, while the number of syllables per breath group was higher in the normal group. As these results can be explained by patients' poor breath support due to glottal insufficiency, the question of whether voice disorder patients use their pauses and breath groups properly should be considered carefully in evaluation and intervention.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.6
• /
• pp.96-103
• /
• 1999

This paper proposes efficient VLSI architecture for computation of the 1-D discrete wavelet transform (DWT). The proposed VLSI architecture computes the wavelet lowpass and highpass output sequences using the product term anhm, $n,m{\ge}0$, where an and hm denote the imput sequence and the wavelet lowpass filter coefficient, respectively. Whereas the conventional architectures compute the lowpass and highpass output sequences using the product terms anhm and angm, respectively, where gm denotes the wavelet highpass filter coefficient. The proposed architecture is applied to computation of the Daubechies 4-tap wavelet transform using the relationships between the Daubechies wavelet filter coefficients. Performance comparison of various architectures for computation of the 1-D DWT are presented. Note that the proposed architecture does not require extra processing units whereas the conventional architectures need them. Also it is modeled in very high speed integrated circuit hardware description language (VHDL) and simulated to show its functional validity.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.8
• /
• pp.4553-4557
• /
• 2013

Objective: The purpose of this study was to identify genes related to bladder cancer with samples from normal and disease cases by microarray chip. Methods: After downloading the gene expression profile GSE3167 from Gene Expression Omnibus database which includes 50 bladder samples, comprising 9 normal and 41 disease samples, differentially expressed genes were identified with packages in R language. The selected differentially expressed genes were further analyzed using bioinformatics methods. Firstly, molecular functions, biological processes and cell component analysis were researched by software Gestalt. Then, software String was used to search interaction relationships among differentially expressed genes, and hub genes of the network were selected. Finally, by using plugins of software Cytoscape, Mcode and Bingo, module analysis of hub-genes was performed. Results: A total of 221 genes were identified as differentially expressed by comparing normal and disease bladder samples, and a network as well as the hub gene C1QBP was obtained from the network. The C1QBP module had the closest relationship to production of molecular mediators involved in inflammatory responses. Conclusion: We obtained differentially expressed genes of bladder cancer by microarray, and both PRDX2 and YWHAZ in the module with hub gene C1QBP were most significantly related to production of molecular mediators involved in inflammatory responses. From knowledge of inflammatory responses and cancer, our results showed that, the hub gene and its module could induce inflammation in bladder cancer. These related genes are candidate bio-markers for bladder cancer diagnosis and might be helpful in designing novel therapies.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.37-44
• /
• 2000

In this paper, we described the real-time implementation effort of MPEG-4 audio HVXC (Harmonic Vector eXcitation Coding) algorithm for very low bitrates, which has target applications from mobile communications to Internet telephony, on current high performance floating point TMS320C6701 DSP. We adopted a hardware structure for real-time operation. In order for software optimization, we used C- and assembly-language level optimizations for time-critical functional codes. Utilizing the internal program memory of the DSP as the program cache, the internal data memory overlap technique and DMA functionality, we could get a goal of realtime operation of HVXC codec both at 2 kbit/s and at 4 kbit/s. For an encoder at 2 kbit/s, the optimization ratio to original code is about 96 %. Finally, we got the subjective quality of MOS 2.45 at 2 kbit/s from an informal quality test.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.111-120
• /
• 2005

Software development creates many product that class components, Class Diagram, form, object, and design pattern. So this Paper suggests Index/XML Sequence Relation information system for product abstraction and classification, the system of design product Sequence Relation abstraction which can store, reuse design patterns in the meta modeling database with pattern Relation information. This is Index/XML Sequence Relation system which can easily change various relation information of product for product abstraction and classification. This system designed to extract and classify design pattern efficiently and then functional indexing, sequence base indexing for standard pattern, code indexing to change pattern into code and grouping by Index-ID code, and its role information can apply by structural extraction and design pattern indexing process. and it has managed various products, class item, diagram, forms, components and design pattern.