• Journal of Adhesion and Interface
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2009

The waterborne acrylic pressure-sensitive adhesive in the basis of butylacylate (BA) and 2-Ethylhexylacrylate (2-EHA) was synthesized and the methyl methacrylate (MMA) have been used to give the rigidity perfroamce. The polymreric latex was synthesized using butyl acrylate (BA), 2-ethylhexyl acrylate (EHA), methyl methacrylate (MMA) and each 1, 2, 3% of various functional monomers. The dimethyl-2-imidazlidon acrylate and 2-acrylamido-2-methyl-1-propanesulfonate was used in order to increase the wetting properties of acrylic emulsion. To study of properties of functional monomer, The polymreric latex was synthesized various functional monomers each 1, 2, 3%. The 2-acrylamido-2-methyl-1-propanesulfonate showed the best properties. Latex with acrylic acid and dimethyl-2-imidazlidon acrylate had good peel strength, holding power, but it showed that they didn't separate from adhered cleanly by weak cohesion strength. The adhesion performance was increased by increasing amount of 2-acrylamido-2-methyl-1-propanesulfonate however latexes with upper 7% 2-acrylamido-2-methyl-1-propanesulfonate showed that the properties of PSA decreased.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.145-149
• /
• 2011

Recently, as the design of a system gets larger and more complex, functional verification method based on system-level becomes more important. The verification of a functional block mainly uses BFM(bus functional model). The larger the burden on functional verification is, the more the importance of configuring a proper verification environment increases rapidly. SystemVerilog unifies hardware design languages and verification languages in the form of extensions to the Veri log HDL. The processing of design description, function simulation and verification using same language has many advantages in system development. In this paper, we design DUT that is composed of AMBA bus and function blocks using SystemVerilog and verify the function of DUT in verification environment using layered testbench. Adaptive FIR filter and Booth's multiplier are chosen as function blocks. We confirm that verification environment can be reused through a minor adaptation of interface to verify functions of other DUT.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.880-886
• /
• 2014

Many railway signalling functions have increasingly depended on computer software with recent development in computing technology, leading to evolution into more flexible and intelligent railway signalling system. Meanwhile, software programs are likely to have many errors and the cost incurred by such errors has increased. Especially, if fatal software error occurs during railway operation, it may result in loss of lives. So the software verification and validation have become more important. It is needed for software functional safety tool to support these, but most commercial tools depend on direct access to the system's memory, resulting in many difficulties in application. Owing to such difficulties and complexity, they are rarely used in railway signalling system software validation. In this study, a new testing tool for software functional testing through an external interface that can be easily used in functional testing of software was developed. Such testing tool allows development and analysis of test cases for black-box testing through analysis of actually used interface protocols, leading to increased user convenience.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.117-120
• /
• 2002

This paper is to develop the sensing system for opening-force measurement such as O-Ring muscular meridian. We designed to overcome the functional limit that the conventional force-sensor can measure just the closing-force. Therefore, the new sensor can meet a variety of application as well as O-Ring test. The structure of the new sensor is an actuator-type system using an electromagnet. That is made up of mechanical system, electromagnet, current transformer and computer interface circuit. Driving software and user interface program of the new sensor system also is explained in this paper.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.665-666
• /
• 2006

By adding user interface to the usual router, an improved functional router is implemented In this paper, we design the DWT(Discrete Wavelet Transform) for JPEG2000 CODEC. The DWT is developed based on ARM-based Excalibur, and the system contains DMA processor, Slave interface, DWT filter, Controller. The architecture of the prposed DWT is verified using Altera QuartusII.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.11
• /
• pp.1844-1851
• /
• 1997

Displacement fields and interface stresses are obtained by modifying the potential energy functional with a penalty function which enforces the continuity of stresses at the interface of two-materials. Based on the displacement field and the interface stresses, a new methodology to generate a continuous stress field over the entire domain including the interface of the dissimilar materials has been proposed by combining the L$^{2}$ projection method of stress-smoothing and the Loubignac's iterative method of improving the displacement field. Stress analysis was carried out on two examples which are made of highly dissimilar materials. As a result of the analysis, it is found that the proposed method provides improved continuity of the stress field over the entire domain as well as predicting accurate nodal stresses at the interface. In contrast, the conventional displacement-based finite element method provides significant stress discontinuties at the interfaces. In addition, it was found that the total strain energy evaluated from the improved continuous stress field converge to the exact value as increasing the number of iterations in the proposed method.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2557-2560
• /
• 2003

By adding user interface to the usual router, an improved functional router is implemented in this paper. The proposed router is developed based on the SA1110 processor, and the system contains 1 ethernet port, 2 PCMCIA slots, and 1 serial communication port. The Emdedded Linux is adopted as an operating system, and application programs are implemented by using QT/Embedded.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.370-375
• /
• 2001

This paper is to suggest reliability modeling and analysis method of Electric Multiple Unit (EMU). It is necessary to identify subsystem/equipments of EMU and functional interfaces between subsystems in order to carry out reliability modeling of EMU properly. After identifying subsystem/equipments and functional interface, reliability allocation is performed using ARINC method. Reliability target of system/subsystems is verified in revenue service during the proper periods.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.573-580
• /
• 2002

Reusing IPs requires interface protocol related tasks such as writing test benches and designing interface protocol conversion circuits, e.g. wrappers for IPs. The results of those tasks usually include IPC(interface protocol component)s for the corresponding IPs, similar to bus protocol components of the bus functional models. This paper proposes a methodology for the interface circuit design using synthesizable In that can be re-used. IPC recognizes or executes transactions over the given interface ports. So we present a transaction-oriented interface protocol description language, and a method to convert the description into an IPC in synthesizable VHDL code. With experiments, we show that the interface design using IPC does not cause significant area overhead compared with the interface design without IPC. The proposed IPC-based approach can be employed to reduce the interface design time since the designers can reuse IPCs without understanding the detailed interface protocols.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.11a
• /
• pp.695-716
• /
• 2011

In the future, smartphone convergences are not only based on the on/offline integration, but also with the integration between mobile communications and broadcasts. Therefore, there is a need to search for new direction of mobile device that enables variety user applications that are different from the existing size and application issue. The aim of this reserch is to improve user interface of smartphone's functional attribute. The survey results in this paper showed that the most preferable attribute of smartphone among the 8 was the wireless internet 25.3%, followed by messaging 20% and application 19.8%, which totaled to 62.5%. But the samples used were mostly limited to those aged 20 through 30. So the results are not considered as a representative preference of all smartphone users, and should be considered otherwise before materializing them to a product. Therefore, for the more liable results the further research should be conducted to gather data from a variety of users of all ages, and the functional attribute should be analysed through QFD.