• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.231-245
• /
• 2023

In the cosmetics industry, it is important to develop new materials for functional cosmetics such as whitening, wrinkles, anti-oxidation, and anti-aging, as well as technology to increase absorption when applied to the skin. Therefore, in this study, we tried to optimize the nanoemulsion formulation by utilizing response surface methodology (RSM), an experimental design method. A nanoemulsion was prepared by a high-pressure emulsification method using Glabridin as an active ingredient, and finally, the optimized skin absorption rate of the nanoemulsion was evaluated. Nanoemulsions were prepared by varying the surfactant content, cholesterol content, oil content, polyol content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization as RSM factors. Among them, surfactant content, oil content, high-pressure homogenization pressure, and cycling number of high-pressure homogenization, which are factors that have the greatest influence on particle size, were used as independent variables, and particle size and skin absorption rate of nanoemulsion were used as response variables. A total of 29 experiments were conducted at random, including 5 repetitions of the center point, and the particle size and skin absorption of the prepared nanoemulsion were measured. Based on the results, the formulation with the minimum particle size and maximum skin absorption was optimized, and the surfactant content of 5.0 wt%, oil content of 2.0 wt%, high-pressure homogenization pressure of 1,000 bar, and the cycling number of high-pressure homogenization of 4 pass were derived as the optimal conditions. As the physical properties of the nanoemulsion prepared under optimal conditions, the particle size was 111.6 ± 0.2 nm, the PDI was 0.247 ± 0.014, and the zeta potential was -56.7 ± 1.2 mV. The skin absorption rate of the nanoemulsion was compared with emulsion as a control. As a result of the nanoemulsion and general emulsion skin absorption test, the cumulative absorption of the nanoemulsion was 79.53 ± 0.23%, and the cumulative absorption of the emulsion as a control was 66.54 ± 1.45% after 24 h, which was 13% higher than the emulsion.

• Clean Technology
• /
• v.29 no.1
• /
• pp.10-21
• /
• 2023

Hydrogels that are made of natural polymer-based double networks have excellent biocompatibility, low cytotoxicity, and high water content, assuring that the material has the properties required for a variety of biomedical applications. However, hydrogels also have limitations due to their relatively weak mechanical properties. In this study, hydrogels based on an alginate di-aldehyde (ADA) and gelatin (Gel) double network that is reinforced with additional hydrogen bonds formed between the hydroxyl (-OH) groups of the hyperbranched polymer (HPG) and the functional groups present inside of the hydrogels were successfully synthesized. The enhanced mechanical properties of these synthesized hydrogels were evaluated by varying the amount of HPG added during the hydrogel synthesis from 0 to 25%. In addition, magnetite nanoparticles (Fe₃O₄ NPs) were synthesized within the hydrogels and the structures and the magnetic properties of the hydrogels were also characterized. The hydrogels that contained 15% HPG and Fe₃O₄ NPs exhibited superparamagnetic behaviors with a saturation magnetization value of 3.8 emu g^-1. These particular hydrogels also had strengthened mechanical properties with a maximum compressive stress of 1.1 MPa at a strain of 67.4%. Magnetic hydrogels made with natural polymer-based double networks provide improved mechanical properties and have a significant potential for drug delivery and biomaterial application.

• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.148-156
• /
• 2022

Ecological occupation in irrigation ponds is a well-acknowledged fact that is essential for biodiversity conservation in agricultural ecosystems. However, there are few studies on the ecological functions and relationship between a paddy field and irrigation using macroinvertebrates in an environmentally friendly paddy field. The objective of this study is to identify the community and distribution characteristics of macroinvertebrates in an agricultural paddy field and irrigation pond ecosystems, and to provide basic data on the ecological function of an environmentally friendly paddy field. Macroinvertebrate sampling was conducted from May to September in an agricultural paddy field and irrigation pond in an environment-friendly paddy field in Boryeong city. We conducted a study to identify the distribution characteristics using macroinvertebrate species analysis, such as Functional Feeding Groups (FFGs), Habitat Oriented Groups (HOGs), rarefaction curve, and a two-way dendrogram. A total of 37 species of macroinvertebrates in 28 families, 13 orders were collected study during the period of the investigation. Dominant taxa of macroinvertebrates included Coleoptera, Hemiptera, and Odonata. In terms of FFGs, predators and gathering collectors accounted for approximately 70%, in relation to HOGs, and climbers and swimmers occupied more than 50% from both the paddy field and irrigation pond. With respect to the rarefaction curve, the irrigation pond (July) was high as E (S, 141)=18 species, while the paddy field (May) was comparatively low as E (S, 141)=9 species. In conclusion, our results revealed that macroinvertebrates, such as Notonecta triguttata, Peltodytes intermedius, Appasus major, Laccotrephes japonensis, Appasus japonicus, Sigara substriata, Enochrus simulans, and Sternolophus rufipes, were used as a habitat and spawning ground in both paddy field and irrigation pond. The irrigation pond appears to be a very important spawning ground for macroinvertebrates.

• Journal of Life Science
• /
• v.33 no.4
• /
• pp.357-362
• /
• 2023

This report looks at an agar-degrading marine bacterium and characterization of its agarase. Agar-degrading marine bacterium JS-1 was isolated with Marine agar 2216 media from seawater from the seashore of Sojuk-do, Changwon in Gyeongnam Province, Korea. The agar-degrading bacterium was named as Agarivorans sp. JS-1 by phylogenetic analysis based on 16S rRNA gene sequencing. The extracellular agarase was prepared from the culture media of Agarivorans sp. JS-1 and used for characterization. Relative activities at 20℃, 30℃, 35℃, 40℃, 45℃, 50℃, 55℃, and 60℃ were 70%, 74%, 78%, 83%, 87%, 100%, 74%, and 66%, respectively. Relative activities at pH 5, 6, 7, and 8 were 91%, 100%, 90%, and 89%, respectively. Its extracellular agarase showed maximum activity (207 units/l) at pH 6.0 and 50℃ in 20 mM Tris-HCl buffer. The residual activity after heat treatment at 20℃, 30℃, and 50℃ for 30 minutes was 90%, 70%, and 50% or more, respectively. After a 2-hour heat treatment at 20℃, 30℃, 35℃, 40℃, and 45℃, the residual activity was 80%, 68%, 65%, 63%, and 57%, respectively. At 50℃ and above, after heat treatment for 30 minutes, the residual activity was below 60%. Thin layer chromatography analysis suggested that Agarivorans sp. JS-1 produces extracellular β-agarases as they hydrolyze agarose to produce neoagarooligosaccharides such as neoagarohexaose (20.6%), neoagarotetraose (58.5%), and neoagarobiose (20.9%). Agarivorans sp. JS-1 and its thermotolerant β-agarase would be useful in the production of neoagarooligosaccharides, showing functional activity such as inhibition of bacterial growth and delay of starch degradation.

• Korean Journal of Animal Reproduction
• /
• v.23 no.2
• /
• pp.149-157
• /
• 1999

The functional role of cumulus cells on the penetration and polyspermy during in vitro fertilization in porcine was examined. The penetration rate was significantly higher (P＜0.01) in oocytes with (61%) than without (25%) cumulus cells, but significant differences in polysper-my rates were not observed. When hyaluronidase was added to the fertilization medium with different concentrations, penetration rates in oocytes with cumulus cells were higher than in oocytes without cumulus cells at 0 (61% vs 34% ; P＜0.05), 0.01 (56% vs 35% ; P＜0.05), 0.1 (66% vs 30% ; P＜0.05) and 1.0mg/$m\ell$ (39% vs 27%). The polyspermy rates were lower in oocytes without than with cumulus cells, and had a tendency to decrease with high concentrations of hyaluronidase. In another experiment, the penetration and polyspermy rates had a tendency to increase as time of sperm-oocyte culture was prolonged. At 16 and 20 h after insemination, the penetration rates were significantly higher (P＜0.05) in oocytes with (48 and 62% for 16 and 20 h) than without (25 and 31% for 16 and 20 h) cumulus cells in medium containing hyaluronidase. Polyspermy rates were significantly (P＜0.05) lower in oocytes without (13% and 16%) than with (37% and 48%) cumulus cells at 16 and 20 h after insemination. In cumulus-free oocytes inseminated in medium containing different concentrations of cumulus cells, the penetration rates were significantly (P＜0.05) higher in medium with than without hyaluronidase. The proportion of polyspermy was lower in medium without than with hyaluronidase at 0 (10% vs 0%), 10$^2$(25% vs 0%), 10$^4$(24% vs 14%) and 10$^{6}$ (29% vs 10% ; P＜0.05) cumulus cells/$m\ell$. These results suggest that cumulus cells can have a positive influence on sperm penetration, its action on polyspermy control does appear to function primarily on zona pellucida by co-culture of cumulus cells and oocytes in medium without hyaluronidase.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.455-463
• /
• 2022

To understand functional changes of forest ecosystems due to climate change, correlation between decomposition rate of leaf litter, an important function of forest ecosystems, and microclimatic factors was analyzed. After 48 months elapsed, percent remaining weight of Quercus mongolica leaf litter was 27.1% in the east aspect and 37.0% in the west aspects. Decay constant of Q. mongolica leaf litter was 0.33 in the east aspect and 0.25 in the west aspect after 48 months elapsed. Initial C/N ratio of Q. mongolica leaf litter was 38.5. After 48 months elapsed, C/N ratio of decomposing Q. mongolica leaf litter decreased to 13.43 in the east aspect and 16.72 in the west aspect. Average air temperature and soil temperature during the investigation period of the research site were 8.2±9.0 and 9.1±9.3 in the east and 8.5±7.4 and 9.3±7.3℃ in the west aspect, respectively, with the west aspect showing higher air and soil temperatures. Soil moisture showed no significant difference between east and west aspects (average soil moisture: 19.4±11.0% vs. 20.5±5.7%). However, as a result of analyzing the correlation between decomposition rate and microclimatic factors, it was found that the decomposition rate and soil moisture has a positive correlation(r=0.426) in the east aspect but not in the west aspect. Our study shows that the correlation between decomposition rate and microclimatic factors can be significantly different depending on the direction of the aspect.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.413-422
• /
• 2022

Barnea manilensis is a bivalve which bores soft rocks, such as, limestone or mudstone in the low intertidal zone. They make burrows which have narrow entrances and wide interiors and live in these burrows for a lifetime. In this study, the morphology and the microstructure of the valve of rock-boring clam B. manilensis were observed using a stereoscopic microscope and FE-SEM, respectively. The chemical composition of specific part of the valve was assessed by energy dispersive X-ray spectroscopy (EDS) analysis. 3D modeling and structural dynamic analysis were used to simulate the boring behavior of B. manilensis. Microscopy results showed that the valve was asymmetric with plow-like spikes which were located on the anterior surface of the valve and were distributed in a specific direction. The anterior parts of the valve were thicker than the posterior parts. EDS results indicated that the valve mainly consisted of calcium carbonate, while metal elements, such as, Al, Si, Mn, Fe, and Mg were detected on the outer surface of the anterior spikes. It was assumed that the metal elements increased the strength of the valve, thus helping the B. manilensis to bore sediment. The simulation showed that spikes located on the anterior part of the valve received a load at all angles. It was suggested that the anterior part of the shell received the load while drilling rocks. The boring mechanism using the amorphous valve of B. manilensis is expected to be used as basic data to devise an efficient drilling mechanism.

• Korean Journal of Environmental Biology
• /
• v.40 no.4
• /
• pp.363-373
• /
• 2022

On April 29, 2021 (1st), June 2 (2nd), and August 17 (3rd), we surveyed benthic macroinvertebrates fauna at Muljangori-oreum wetland in Bonggae-dong, Jeju Island, Korea. Muljangori-oreum wetland was divided into four areas. The survey was conducted in three accessible areas (areas 1-3). As a result of habitat environment analysis, the average monthly temperature from 2017 to 2021 was the highest in July and August and the lowest in December and February. This pattern was repeated. As a result of analyzing changes in vegetation and water surface area through satellite images, normalized difference vegetation index (NDVI) increased from February to July and decreased after July. Normalized difference water index (NDWI) was analyzed to show an inverse relationship. A total of 21 species from 13 families were identified in the qualitative survey and a total of 412 individuals of 24 species from 15 families were identified in the quantitative survey. A total of 26 species from 17 families, 8 orders, 3 classes, and 2 phyla of benthic macroinvertebrates were identified. The dominant species was Chronomidae spp. with 132 individuals (32.04%). Noterus japonicus was a subdominant species with 71 individuals (17.23%). As a result of comparative analysis of species identified in this study and the literature, it was confirmed that species diversity was high for Coleoptera and Odonata. Main functional feeding groups (FFGs) were found to be predators. Habitat orientation groups (HOGs) were found to be swimmers. In OHC (Odonata, Hemiptera, and Coleoptera) group, 17 species (73.91%) in 2021, 23 species (79.31%) in 2016, 26 species (86.67%) in 2018, and 19 species (79.17%) in 2019 were identified. Cybister japonicus, an endangered species II, was confirmed to inhabit Muljangori-oreum wetland in the literature. Ten individuals (2.43%) were also confirmed to inhabit Muljangori-oreum wetland in 2021. Therefore, continuous management and habitat protection are required to maintain the habitat environment of C. japonicus in Muljangori-oreum wetland.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.411-417
• /
• 2019

Purpose: To compare the clinical outcomes of single injection adductor canal block (SACB), continuous adductor canal block (CACB), and the concomitant use of transdermal buprenorphine after total knee arthroplasty (TKA). Materials and Methods: A total of 125 patients who underwent TKA were divided into three groups and the clinical results were retrospecitively compared. Group I was comprised of patients with pain controlled by SACB (n=41). Group II consisted of patients with pain controlled by both SACB and transdermal buprenorphine (10 ㎍/h) (n=44). Group III contained patients with pain controlled by CACB (n=40). The visual analogue scale (VAS) was used as the pain control indicator and the patients were measured on a VAS for resting on the bed (VAS-Rest) at 12 hours, 24 hours, and 48 hours after surgery. The VAS while doing continuous passive motion (VAS-CPM) on the first and second postoperative day was also measured. In addition, the total amount of medications used (Butopahn, Tridol, and Ketorac) for the intravenous patient controlled analgesia (PCA) was counted for 48 hours after surgery. As the indicator of the functional recovery outcome, the incidence of nausea and vomiting was observed for 48 hours after surgery. The maximum knee joint flexion range and maximum walking distance on the first and second postoperative day, and the total length of stay at the hospital were compared. Results: The VAS-Rest was similar in the three groups at 12 hours after surgery, but at 24 hours and 48 hours after surgery, group II and III a lower VAS-CPM and total amount of medications used for PCA than group I (p<0.05). The three groups showed a low incidence of nausea and vomiting, maximum knee joint flexion range, and similar walking distance and total length of stay at the hospital. Conclusion: The combination of SACB and transdermal buprenorphine has great pain control effect initially. On the other hand, it is not associated with catheter complications and it is convenient to use and safety toward the renal function. Therefore, the concomitant use of SACB and transdermal buprenorphine can be an effective pain control method after TKA.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.1
• /
• pp.37-44
• /
• 2019

Purpose: Tumor infiltration around the knee joint or skip metastasis, repeated infection sequelae after tumor prosthesis implantation, regional recurrence, and mechanical failure of the megaprosthesis might require combined distal femur and proximal tibia replacement (CFTR). Among the aforementioned situations, there are few reports on the indication, complications, and implant survival of CFTR in temporarily arthrodesed patients who had a massive bony defect on either side of the knee joint to control infection. Materials and Methods: Thirty-four CFTR patients were reviewed retrospectively and 13 temporary arthrodesed cases switched to CFTR were extracted. All 13 cases had undergone a massive bony resection on either side of the knee joint and temporary arthrodesis state to control the repeated infection. This paper describes the diagnosis, tumor location, number of operations until CFTR, duration from the index operation to CFTR, survival of CFTR, complications, and Musculoskeletal Tumor Society (MSTS) score. Results: According to Kaplan-Meier plot, the 5- and 10-year survival of CFTR was 69.0%±12.8%, 46.0%±20.7%, respectively. Six (46.2%) of the 13 cases had major complications. Three cases underwent removal of the prosthesis and were converted to arthrodesis due to infection. Two cases underwent partial change of the implant due to loosening and periprosthetic fracture. The remaining case with a deep infection was resolved after extensive debridement. At the final follow-up, the average MSTS score of 10 cases with CFTR was 24.6 (21-27). In contrast, the MSTS score of 3 arthrodesis cases with failed CFTR was 12.3 (12-13). The average range of motion of the 10 CFTR cases was 67° (0°-100°). The mean extension lag of 10 cases was 48° (20°-80°). Conclusion: Although the complication rates is substantial, conversion of an arthrodesed knee to a mobile joint using CFTR in a patient who had a massive bony defect on either side of the knee joint to control infection should be considered. The patient's functional outcome was different from the arthrodesed one. For successful conversion to a mobile joint, thorough the eradication of scar tissue and creating sufficient space for the tumor prosthesis to flex the knee joint up to 60° to 70° without soft tissue tension.