• Journal of applied mathematics & informatics
• /
• 제29권3_4호
• /
• pp.831-846
• /
• 2011

There are several methods, in the literature, for finding the fuzzy optimal solution of fully fuzzy transportation problems (transportation problems in which all the parameters are represented by fuzzy numbers). In this paper, the shortcomings of some existing methods are pointed out and to overcome these shortcomings, a new method (based on fuzzy linear programming formulation) is proposed to find the fuzzy optimal solution of unbalanced fuzzy transportation problems with a new representation of trapezoidal fuzzy numbers. The advantages of the proposed method over existing method are discussed. Also, it is shown that it is better to use the proposed representation of trapezoidal fuzzy numbers instead of existing representation of trapezoidal fuzzy numbers for finding the fuzzy optimal solution of fuzzy transportation problems. To illustrate the proposed method a fuzzy transportation problem (FTP) is solved by using the proposed method and the obtained results are discussed. The proposed method is easy to understand and to apply for finding the fuzzy optimal solution of fuzzy transportation problems occurring in real life situations.

• 한국전산유체공학회지
• /
• 제19권3호
• /
• pp.37-43
• /
• 2014

In this paper, hydraulic & thermal developing and fully developed laminar forced convection flow of a water-$Al_2O_3$ nanofluid in a circular horizontal tube with uniform heat flux at the wall, are investigated numerically. A single phase model employed with temperature independent properties. The thermal entrance length is presented in this paper. The variations of the convective heat transfer coefficient and shear stress are shown in the entrance region and fully developed region along different nanoparticles concentration and Reynolds numbers. Convective heat transfer coefficient for nanofluids is larger than that of the base fluid. It is shown that heat transfer is enhanced and shear stress is increased as the particle volume concentration increases. The heat transfer improves, as Reynolds number increases.

• 설비공학논문집
• /
• 제4권3호
• /
• pp.217-232
• /
• 1992

A Numerical study on two-dimensional laminar natural convection with and without surface radiation in fully or partially open square cavity was performed. The cavity has one vertical heated wall facing a vertical opening and two horizontal insulated walls. The pressure boundary condition was applied to the opening instead of the velocity boundary condition. The results of this study showed that the increase of partition length decreased the convective and the radiative Nusselt numbers. It was also found that the increase of wall emissivity decreased the convective Nusselt numbers but increased the radiative Nusselt numbers.

• ALGAE
• /
• 제21권3호
• /
• pp.323-332
• /
• 2006

Mitochondrial distribution and abundance were assessed during the growth of apical and subapical cells in the red algae Colaconema caespitosum (J. Agardh) Jackelman, Stegenga and Bolton and Antithamnion cruciatum (C. Agardh) Nägeli after staining with 3,3’-dihexyloxacarbocyanine iodide [DiOC6(3)] and 2,4’-dimethylaminostyryl-Nethylpyridinium iodide (DASPEI). In fully elongate apical cells of C. caespitosum there were 100-120 mitochondria. During apical cell enlargement and division there is a doubling and then halving of the mitochondrial numbers. Apical cells prior to cytokinesis in young filaments are smaller than in mature filaments (ca. 50 and 100 μm long, respectively) and have fewer mitochondria (ca. 100 and 120 mitochondria per cell, respectively). In older vegetative cells mitochondria tend to aggregate at opposite ends of the cells with some mitochondria associated with the central nucleus or at points of apparent branch initiation. There is a greater density of mitochondria in apical cells of smaller versus larger plants (one mitochondrion per 6.3 μm3 and 9.8 μm3, respectively), suggesting that apical cells of younger plants may be more metabolically active. Male and female gametophytic thalli of Antithamnion cruciatum had similar numbers of mitochondria in apical cells of indeterminate axes, as did gametophytic and sporophytic thalli. There were about 40-50 mitochondria in fully elongated apical cells with about half this number in newly divided apical and subapical cells. Apical cells of determinate branches had more mitochondria (60-77) than indeterminate branches (60-70 vs. 40-50). In both species and in all cell types mitochondrial numbers were highly correlated with cell size.

• 한국기계기술학회지
• /
• 제13권2호
• /
• pp.85-91
• /
• 2011

Computational results with pseudoplastic fluid flows for fully developed non-Newtonian laminar flows have been obtained. Those consist of the product of friction factor and Modified Reynolds number and Nusselt numbers with respect to the shear rate parameter in an annular pipe. The numerical results of the product of friction factor and Reynolds numbers and the Nusselt numbers for both Newtonian region and the power law region were compared with previously published asymptotic results, respectively. In the present calculations, the product of friction factor and Newtonian Reynolds numbers for pseudoplastic fluid at power law region in annular pipe is 180% less than that for Newtonian fluid. For power law fluids with different power law flow indices, the difference of the product of friction factor and power law Reynolds number between previous and the present results at the power law region is within 0.20%. The solutions also show the effect of the shear rate parameter on the Nusselt number and about 11% increase of Nusselt number at the power region.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.115-120
• /
• 2011

A ribbed tube consumes more power to transport the fluid by comparing with flat one. After the tangential velocity component occurs, its contact area with the ribbed tube becomes large and it enables the effective energy transportation. The flow characteristics vary according to the geometry of tube rib. This study aims to investigate the flow characteristics of fluids working at Reynolds numbers of 20,000, 40,000, 60,000 and 80,000 with the air at $15^{\circ}C$ in the ribbed test tube high 1mm and wide 8.48mm. As the flow characteristics are included with the states of fully developed hydrodynamical region, axial velocity vector distribution and non-dimensional velocity distribution, they are shown with the physical validity.

• Architectural research
• /
• 제15권1호
• /
• pp.9-15
• /
• 2013

Effects of physical attributes of workstation enclosures on the performance of office workers with different difficult levels of office tasks and moods are presented. Performance scores in complex tasks were expected to increase with greater workstation enclosures while those in simple tasks would be the same. Mood ratings were expected to be higher in lower workstation enclosures. Performance of 102 college students on ambient office sounds (45 dBA) with office tasks were measured for 100 minutes under three different workplace enclosures: (1) four foot partitions on two sides; (2) six foot partitions on three sides; and (3) a fully enclosed workstation with eight foot partitions. The tasks were to memorize a paragraph with 130 words (complex task) and to search phone numbers (simple task). The complex task performance in the fully enclosed workstation was increased compared to that in the workstation with four foot partitions (p < 0.001) and to that in the workstation with six foot partitions (p < 0.05). However, occupants in the fully enclosed workstation with office sounds without speech generally gave higher mood ratings. It indicates that closed individual offices may offer important contributions to collaborative work as well as individual productivity. These findings would help design community revise open plan design to increase collaboration among office workers.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.1940-1949
• /
• 1995

A numerical study for a two dimensional multi-jet with crossflow of the spent fluid has been carried out. Three different distributions of mass-flow rate at 5 jet exits were assumed to see their effects upon the flow characteristics, especially in the jet-flow region. For each distribution, various Reynolds numbers ranging from laminar to turbulent flows were considered. Results show that a fully developed laminar flow exists above a certain Reynolds number whose exact value depends upon the mass flow rate distribution. AS the Reynolds number increases, the flow becomes transitional from downstream and finally a fully developed turbulent flow forms in the jet-flow region. The critical Reynolds number where the fully developed turbulent flow forms is quite dependent upon the distribution of mass-flow rate. One interesting result is that the distribution of the skin friction coefficient along the inpingement plate in the jet-flow region shows a consistent dependency on the Reynolds number, i.e. inversely proportional to the square root of the Reynolds number, regardless of flow regime.

• 정보보호학회논문지
• /
• 제33권3호
• /
• pp.375-381
• /
• 2023

완전동형암호는 암호화된 데이터에 대한 대수적 연산을 지원하며, 최근에는 최대값 함수 등의 비대수적 연산도 근사하는 방법이 연구되고 있다. 그러나 아직 4개 이상의 숫자에 대한 정밀한 맥스 풀링 근사 연구는 이루어지지 않았다. 본 연구에서는 최대값 함수 근사 다항식의 합성을 활용하여 정밀한 맥스 풀링 근사 기법을 제안하였으며, 이를 이론적으로 분석하여 높은 정밀도를 증명하였다. 실험 결과, 제안하는 근사 맥스 풀링은 1ms 이내의 작은 분할 실행 시간과 이론적 분석과 일치하는 높은 정밀도를 보여주었다.

• 대한가정학회지
• /
• 제25권4호
• /
• pp.73-83
• /
• 1987

This study was conducted to evaluted the industry foodservice management practices, and to suggest guidelines for the effective foodservice management. The results of the study can be summarized as follows: 1) Feeding numbers among the types of industry were varied widely, and foodservice personnels were insufficient when comparing with the feeding numbers. 2) Effective recording as well as management system were not fully established in menu planning, food production, assembly and service. Thermal retention equipments were not provided to control food quality. 3) Convenience food items such as frozen beef cutlet, hambergar patty, retail cuts of meat, and canned fish were seldom used. 4) Sanitary conditions of kitchen and dining areas were evaluated as unsatisfactory comdition. 5) Equiped rate of facilities in surveyed foodservice operations were 52.7 percentage of the required standards.