• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.479-482
• /
• 2015

The flue gas desulfurization (FGD) process is one of the most effective methods to reduce the amount of $SO_2$ gas (up to 90%) generated by the use of fossil fuel. Limestone is usually used as a desulfurizing agent in the wet-type FGD process; however, the limestone reserves of domestic mines have become exhausted. In this study, limestone sludge produced from the steel works process is used as a desulfurizing agent. Seven different types of additives are also used to improve the efficiency of the desulfurization process. As a result, alkaline additive is identified as the least effective additive, while certain types of organic acids show higher efficiency. It is also observed that the amount of FGD gypsum, which is a by-product of the FGD process, increases with the used of some of those additives.

• Nuclear Engineering and Technology
• /
• 제37권3호
• /
• pp.287-292
• /
• 2005

[ $\pi$ ]The effects of silica-based additives have been investigated to improve the creep property of a $UO_2$ pellet. The additive composition, $50wt\%SiO_2-47wt{\%}CaO-3wt\%Cr_2O_3$ (SCC), was selected according to the dihedral angle and the distribution of the second phase. It was observed that the creep rate of the $0.07 wt\%$ SCC-added $UO_2$ was slower than that of the pure $UO_2$. However, the creep rate of the $0.22 wt\%$ SCC-added $UO_2$ was about 3_48 times faster than that of the pure $UO_2$, depending on the applied stress in the lower stress range. In the case of the $0.35 wt\%$ SCC-added $UO_2$, the creep rate decreased in comparison with that of the $0.22 wt\%$ SCC-added $UO_2$. The observed enhancement in the creep rate might depend on a balance between the positive role of the viscous intergranular phase and the negative roles of the additives and the grain growth.

• 한국결정성장학회지
• /
• 제32권2호
• /
• pp.51-54
• /
• 2022

연료전지에 사용되는 귀금속 전류집전체의 물성은 소재 기공도에 크게 영향을 받는다. 따라서 소재 기공도를 제어 위한 다양한 노력들이 진행되어왔다. 이중 많이 사용되는 전략으로 재료 열처리 시 기공형성제를 첨가하는 것이다. 기존의 기공형성제는 3차원 구조체였다. 본 연구에서는 차별화 전략으로 Ag 전류집전체의 기공도를 높이기 위해 2차원 구조 나노시트를 소결방지제로 첨가하였다. 실제로 나노시트 첨가에 의해 소결밀도가 감소되는 것을 보여주었다. 2차원 소재로는 초나노 두께(~ 1 nm)를 갖는 RuO₂ 나노시트가 이용되었다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 제32회 펄프종이기술 국제세미나
• /
• pp.33-55
• /
• 2007

This article portrays special cellulose fibers, which are designed to be a functional additive and a carrier for papermaking chemicals. The first part of the presentation deals with the micronized $ARBOCEL^{(R)}$ cellulose fibers, which are used as a functional paper/paperboard additive. In particular as a bulk and speed aid. The detailed description of the micronized $ARBOCEL^{(R)}$ fibers, their function and effects on papermaking process and paper products are given. The second part of the study describes the concept of fiber-based papermaking chemicals. A new generation of fiber-based papermaking chemicals were presented for the first time at the PTS Pulp Technology Symposium 2005, and then several articles were published in various magazine in Asia ("Paper Asia"), the US ("Pulp & Paper"). and Europe ("Wochenblatt fuel Papierfabrikation"). The information generated quite an interest in the paper industry. Extensive studies of these papermaking additives have been made recently, new information obtained, and the compounds have gained more recognition in the industry. The company J. Rettenmaier und Soehne developed a group of fiber-based papermaking additives. They include combination of fibers with sizing agents, starch, fluorochemicals, minerals, biocides and some others. This article presents in-depth study of the AKD modified micronized cellulose as an example of the fiber-based papermaking chemicals concept. The material of the present paper is based mostly on the results of the pilot paper machine study at the Paper Research Institute PTS (Heidenau, Germany), and includes case studies from the mills, which used $ARBOCELPLUS^{(R)}-AKD$ compounds. It should be noted that the $ARBOCELPLUS^{(R)}$ compounds were not designed to replace traditional additives in paper industry. They should rather be used in those areas, where application of "normal" chemicals is especially problematic

• 한국수소및신에너지학회논문집
• /
• 제25권2호
• /
• pp.105-113
• /
• 2014

Performance tests on $Ni/Ce-ZrO_2/Al_2O_3$ catalysts with additives (MgO, $La_2O_3$) were investigated in the combined reforming processes (SCR, ATR, TRM) in order to produce hydrogen and carbon monoxide (it is called "syngas".). The catalyst characterization was conducted using the BET surface analyzer, X-ray diffraction (XRD), SEM, TPR and TGA. The combined reforming process was developed to adjust the syngas ratio depending on the synthetic fuel (methanol, DME and GTL) manufacturing processes. Ni-based catalysts supported on alumina has been generally recommended as a combined reforming reaction catalyst. It was found that both free NiO and complexed NiO species were responsible for the catalytic activity in the combined reforming of methane conversion, and the $Ce-ZrO_2$ binary support employed had improved the oxygen storage capacity and thermal stability. The additives, MgO and $La_2O_3$, also seemed to play an important role to prevent the formation of the carbon deposition over the catalysts. The experimental results were compared with the equilibrium data using a commercial simulation tool (PRO/II).

• 한국수소및신에너지학회논문집
• /
• 제27권3호
• /
• pp.276-282
• /
• 2016

The effects of conductive additives in a $La_{0.8}Sr_{0.2}MnO_3$ perovskite bifunctional electrode for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) were investigated in an alkaline solution. Highly porous carbon black (CB) and Ni powder were added to the bifunctional electrodes as conductive additives. The surface morphologies of electrodes containing CB and Ni were observed by scanning electron microscopy (SEM). The current densities for both ORR and OER were changed by the addition of CB. The conductive additive changed physical properties of bifunctional electrodes such as the sheet conductance, gas permeability and contact angle. It was observed that the air permeability of electrode was most effective to enhance the currents for ORR and OER.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.17-24
• /
• 2022

This work examined the effect of mixing transition metal-based additives [FeCl₃, Fe-containing paper mill sludge (PMS), CoCl₂·H₂O, ZrO₂, and α-Fe₂O₃] on the thermochemical conversion of coffee waste (CW) in carbon dioxide-assisted pyrolysis process. Compared to the generation amounts of syngas (0.7 mole% H₂ & 3.0 mole% CO) at 700℃ from single pyrolysis of CW, co-pyrolysis in the presence of Fe- or Zr-based additives resulted in the enhanced production of syngas, with the measured concentrations of H₂ and CO ranging 1.1-3.4 mole% and 4.6-13.2 mole% at the same temperature, respectively. In addition, α-Fe₂O₃ biochar possessed the adsorption capacity of As(V) (19.3 mg g^-1) comparable to that of ZrO₂-biochar (21.2 mg g^-1). In conclusion, solid-type Fe-based additive can be highly considered as an efficient catalyst to simultaneously produce syngas (H₂ & CO) as fuel energy resource and metal-biochar as sorbent.

• Tribology and Lubricants
• /
• 제34권5호
• /
• pp.197-207
• /
• 2018

Thermal deterioration of fuel due to long-term storage influences engine performance and causes malfunctions. Fuel stability is usually evaluated via heat resistance and thermal stability during a brief heat shock at high temperature; storage stability in this scenario means that there is very little change in the quality of the fuel during long-term storage. In addition, rubber-based products such as oil seals, O-rings, and rubber hoses can influence the quality of the fuel. When these rubber products are in contact with fuel, they can swell, mechanically weaken, and occasionally crack, thus leaking low molar weight rubber and additives including plasticizer and antioxidant into the fuel to degrade its properties and shorten its useful lifetime. This study determines the thermal stabilities of three kinds of synthetic fuels by evaluating their low temperature kinematic viscosities, chemical composition changes via GC analyses, gross heat of combustion, and color changes. We evaluate the compression set of O-rings by immersing one NBR and two FKM rubber O-rings in the three synthetic fuel samples in airtight containers at variable storage temperatures for six months; from this, we estimate the lifetimes of the O-rings using the Power law model. There were very little changes in the chemical compositions and gross heat of combustion after six months of the experiment. The lifetimes are thus dependent on the materials of the rubber products, and in particular, the FKM O-ring was calculated to have a theoretical lifetime of 200 to 5,700 years. These results indicate that the synthetic fuels maintain their physical properties even after long-term storage at high temperatures, and the FKM O-ring is suitable for long-term sealing of these fuels.

• 한국응용과학기술학회지
• /
• 제33권1호
• /
• pp.118-128
• /
• 2016

대기오염에 관한 관심은 국내 외에서 점진적으로 상승하고 있으며, 자동차와 연료 연구자들은 청정(친환경 대체연료) 연료와 연료품질 향상 등을 이용하여 새로운 엔진 설계, 혁신적인 후 처리 시스템 등의 많은 접근을 통하여 차량 유해 배기가스를 감소시키려고 노력하고 있다. 이러한 연구들은 가솔린 자동차의 배출가스 및 가솔린 차량의 PM 입자 배출 등의 두 가지 이슈로 진행되고 있다. 자동차의 배출가스 및 PM(입자상 물질) 입자는 환경오염과 인체에 악영향을 주는 많은 문제를 일으키고 있다. 추가로, 함산소 첨가제로서 연료에 포함된 MTBE (Methyl Tertiary Butyl Ether)에 대한 환경 문제점을 연구하고 있다. 연구자들은 MTBE가 건강에 미치는 영향에 대한 많은 데이터를 가지고 있다. 이러한 데이터는 높은 MTBE 용량에서 잠재적인 발암 물질 임을 결론짓고 있다. 함산소 연료첨가제 유형 (MTBE, 바이오 ETBE, 바이오 에탄올, 바이오 부탄올)에 기초하여, 본 논문은 가솔린 연료 물성 및 증발가스 배출 특성에 대해 산소함량의 영향을 검토하였다. 또한, 연료물성에 대한 휘발유 차량의 가속 및 출력 성능을 평가하였다.

• 한국항공우주학회지
• /
• 제44권7호
• /
• pp.576-584
• /
• 2016

본 연구는 다단 하이브리드 로켓의 낮은 비추력 성능을 향상시키는 방법으로 AP 첨가 추진제를 제안하고 있다. 추진제에 첨가된 AP 첨가비율 변화에 따라 다단 하이브리드 로켓의 비추력 성능 변화와 연료과농 연소특성 변화를 살펴보았으며, 이때 AP 첨가비율은 하이브리드 로켓의 연소 특징을 유지하기 위해 최대 15 wt%로 제한하였다. 결과에 의하면, AP 15 wt% 추진제는 AP 0 wt% 추진제와 비교하여 비추력 성능이 약 3% 향상되었다. 또한, 동일한 연소온도를 유지함에도 불구하고, AP 첨가비율을 증가시키면 산화제 유입량, O/F비 변화량, 그리고 연소압력은 감소하며 반경반향 온도 분포가 좋아지는 등 다단 하이브리드 로켓의 성능향상에 긍정적인 효과가 나타났다. 그러나 오직 AP를 추진제에 첨가하는 것만으로 다단 하이브리드 로켓의 비추력 성능을 일반 화학로켓의 수준으로 향상시키는 것이 매우 어려운 일임을 고려할 때, 추가적으로 금속입자 첨가를 통해 비추력 성능을 향상시킬 계획이다.