• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.97-102
• /
• 2018

Combat vehicles require high levels of maneuverability, firepower, armor, and operability. A high-performance power system is required for optimal maneuverability. The fuel pump which supplies fuel stably is very important to achieve this. The fuel pump consists of a pump part, a motor part, and a control part. It is equipped with a BLDC motor. Numerous failures of the fuel pump occurred during vehicle operation when exposed to vibration, shock, and high temperature. The cause of failure was confirmed to be stator slip of the BLDC motor. Stator slip is a consequence of the interference loss between the stator and the housing of the motor part in an high temperature environment. The failure of the fuel pump was solved through size control of the motor housing and the stator. We performed vibration testing at high temperature for verification. This study contributes to improving the reliability of combat vehicles.

• 에너지공학
• /
• 제3권2호
• /
• pp.130-150
• /
• 1994

Coal-water mixture(CWM) fuel has attracted much attention as a substitute fuel for oil by which high economics and short-term commercialization might be realized in comparison with other coal conversion technologies. There are many factors that affect the CWM combustibility, such as the physical properties of CWM, the performance of atomizer and burner, operating conditions, capacity and load of the boiler, etc. Particularly, atomization quality is extremely critical to achieving acceptable carbon conversion efficiency of CWM fuel and maintaining the flame stability, because the coal particles in the CWM droplets burn as agglomerates. This paper presents the R&D results about the CWM atomization characteristics, including the significance of CWM atomization the R&D results about the CWM atomization characteristics, including the significance of CWM atomization quality, the atomization and combustion mechanism, the type of CWM atomizer, size and size distribution of CWM droplets and some factors that influence the atomization performance.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.613-616
• /
• 2007

A pilot scale circulating fluidized bed for refuse derived fuel is developed and constructed in order to demonstrate efficient and safe utilization of waste fuel. The capacity of the facility is 8 steam tons per hour with the steam quality of $450^{\circ}C$ and 38atm. The quantity and the quality of the produced steam is sufficient to produce 1MWe power capacity. The test operation proved the high combustion efficiency of 99% and up. The emissions of NOx, SOx in flue gas are below 100, 60ppm respectively with out any emission control. HCl emissions were above 400ppm at the combustor exit but reduced below 10ppm after scrubber.

• 한국응용과학기술학회지
• /
• 제35권4호
• /
• pp.1260-1268
• /
• 2018

항공터빈유는 등유 기반의 석유제품에 산화 방지제(Antioxidant), 빙결 방지제(Fuel system icing inhibitor, FSII), 전기전도도 향상제(Electrical conductivity improver) 등의 첨가제를 첨가하여 항공기 연료로서 필요한 성능 향상 및 보관이나 이송 등에 관한 특정한 능력을 부여시키고 있다. 이들 첨가제는 항공터빈유의 품질에 이상이 발생하거나 다른 석유제품과 구별하기 위하여 그 첨가량을 정성 및 정량적으로 분석할 수 있어야 한다. 항공터빈유는 수많은 탄화수소 화합물로 구성된 복잡한 화합물이기 때문에 미량으로 첨가된 산화 방지제와 빙결 방지제를 분석하기 위하여 Multi-dimensional GC-MS (MDGC-MS)의 Deans switching 기술을 적용하였다. 2.5 - 20 mg/L 농도 범위의 산화 방지제와 빙결 방지제를 MDGC-MS로 정량 및 정성적으로 분석할 수 있었으며, 검출 한계는 1-dimensional GC-MS의 분석 결과와 비교하여 약 2배 정도 낮았다. 본 연구에서 개발된 시험 방법은 기존의 GC-MS보다 첨가제 피크의 분리능이 더 우수하였으며, 시료의 전처리가 필요없이 두 가지 첨가제를 동시에 분석할 수 있었다.

• Corrosion Science and Technology
• /
• 제19권2호
• /
• pp.57-65
• /
• 2020

As competition among global automakers intensifies, demand for materials that are better in price and performance is increasing. While steel and plastic materials compete for automotive fuel tanks, plastic materials have advantages such as light weight for automobiles. However, they have high prices. Accordingly, in this paper, four types of Zn-X plated steel sheets, electroplating (X = none, Sn) and galvannealed (X = Fe, Fe-Mg), were manufactured and their applicability as a fuel tank material was evaluated. Nano-composite coating solution with good conductivity was treated on the surface of plated steels using a roll coater and then cured through induction furnace to improve corrosion resistance. Quality characteristics such as corrosion resistance, fuel resistance to diverse gasoline and diesel fuels, and seam weldability were evaluated for the above plated steels. Their properties were compared and analyzed with conventional Zn-Ni electroplating steels. Among the above plated steels, Zn-Fe-Mg galvannealed steels coated with nano-composite coating exhibited better properties than other steels. Detailed experimental results suggest that evenly distributed Mg elements on the coating layer play a key role in the enhanced quality performance.

• Journal of Biosystems Engineering
• /
• 제10권2호
• /
• pp.47-54
• /
• 1985

Performance of a screw press was investigated experimentally with soybeans of various temperatures in order to find out a proper temperature of soybean to extract the oil by the mechanical method. Crude oil extracted by the screw press was chemically analyzed to determine a level of processing the oil for the oil to be used as a fuel for a compression ignition engine. The crude oil was degummed and dried by a plant type laboratory experimental setup to decide whether the processes are effective to improve quality of the oil as a fuel. The degummed oil and the degummed and dried oil were also chemically analyzed and were compared with the crude oil and the commercially degummed and dried soybean oil. The results are as follows: 1. In extraction of soybean oil by a screw press, heating soybeans is effective to increase oil production and to decrease energy consumption of the press. A proper temperature of soybean to extract the oil by the press was determined as about $50^{\circ}C$. 2. Soybean oil production and electric energy consumption of the press are about 83 ml and 58 Wh per 1 kg of soybeans heated to about $50^{\circ}C$, respectively. 3. The quality of crude oil produced by the press is similar to that of the commercially degummed and dried oil. The crude oil does not need to be degummed or dried for use as an engine fuel.

• Tribology and Lubricants
• /
• 제28권4호
• /
• pp.178-183
• /
• 2012

The fuel system of a vehicle is a very important compotent, as it provides the firing resources to the combustion chamber of the engine. However, improper operation of the system can generate bad condition or start-off during engine revolution. This study analyzed several examples of failure that had originated in the field. In the first example, the driver operated a vehicle containing both gasoline and LPG in the fuel tank, but the gasoline fuel remained unused for a few months. Therefore the fuel pump was clogged because of gasoline congelation. The second example, dealt with fuel leakage that occurred from the slightly torn O-ring connecting the fuel lines. The third example, pertained to engine damage and power-down owing to the usage of proor-quality fuel and ingredient. Therefore, it is necessary to take adequate measures to prevent the failure of the fuel system of vehicle.

• Nuclear Engineering and Technology
• /
• 제50권8호
• /
• pp.1339-1348
• /
• 2018

The aim of this paper is to determine neutronic performances of the light water reactor (LWR) spent fuel mixed with fertile thorium fuel in a FFHR. Time dependent three dimensional calculations for major technical data, such as blanket energy multiplication, tritium breeding ratio, cumulative fissile fuel enrichment and burnup have been performed by using Monte Carlo Neutron-Particle Transport code MCNP5 1.4, coupled with a novel interface code MCNPAS, which is developed by our research group. A self-sustaining tritium breeding ratio (TBR>1.05) has been kept throughout the calculations. The study has shown that the fissile fuel quality will be improved in the course of the transmutation of the LWR spent in the FFHR. The latter has gained the reusable fuel enrichment level conventional LWRs between one and two years. Furthermore, LWR spent fuel - thorium mixture provides higher burn-up values than in light water reactors.

• Applied Biological Chemistry
• /
• 제50권3호
• /
• pp.137-146
• /
• 2007

지구 온난화의 주 원인인 온실가스의 배출을 감소시키기 위해서 바이오연료에 대한 필요성 및 중요성이 제기되어 왔다. 이미 유럽을 중심으로 오래전부터 바이오디젤 연료에 대한 연구가 시작되어 왔으며 지금은 상용화 단계에 접어들고 있는 반면, 국내 바이오디젤 연료에 대한 연구 수준은 이제 시작단계에 불과한 실정이다. 바이오디젤 연료로 사용가능한 유지작물의 지방산 조성에 따라 자동차 엔진 성능이 저하될 수 있다는 문제가 제기되었고, 이를 해결하고자 표준화된 바이오디젤 품질 규격서가 마련되어졌다. 유럽에서 마련된 바이오디젤 규격에 의하면 올레인산 함량이 높은 기름이 바이오디젤 연료로 적합하며, 유채기름이 다른 유지작물의 기름에 비하여 바이오디젤 연료에 적합하다고 알려져 있다. 따라서 국내 유지작물의 바이오디젤 연료화를 위한 품질 개량과 생산량 증대를 위해 생명공학기술을 이용한 품종 개량에 관한 연구 전략에 대해 고찰하였다.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.480-486
• /
• 2016

Manufacturers have been applying several technologies that can improve the fuel economy of their cars. The regulated voltage control(RVC) system, is one of those technologies being used in passenger cars. In RVC, the voltage of an alternator is controlled depending on the electrical load demand or battery SOC, although each manufacturer differs from another in terms of detail. RVC can reduce the load of an alternator by consuming the stored energy of a battery and simultaneously generate energy. In this paper, a diesel passenger car equipped with an RVC system was tested under FTP-75 and HWFET modes to evaluate fuel economy as their initial battery SOC(100, 90, 80 and 60 %). The test results showed that the initial SOC affects fuel economy only under the FTP-75 mode. FTP-75 fuel economy of the 60% SOC was 13.2 % lower than the 100 % SOC. Also, the simultaneous consumption of the two energy sources did not appear in 60 % SOC.