• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.65-68
• /
• 2003

A quantitative study of the amount of air transported between the boundary layer and the free atmosphere is important for understanding air quality and upper tropospheric ozone, which is a greenhouse gas. Frontal systems are known to be an effective mechanism for the vertical transport of pollutants. Numerical experiments have been performed with a simple two-dimensional front model to simulate vertical transport of trace gases within developing cold fronts. Three different trace gases experiments have been done numerically according to the different initial fields of trace gases such as aerosol, ozone and $H_2O_2$. Trace gas field tilts to the east while the front tilts to the west. Aerosol simulation shows that pollutants can be transported out of the boundary to altitudes of about 10 km. The stratospheric ozone is brought downwards in a tropopause fold behind of the frontal surface. The meridional gradient in trace gas ($H_2O_2$) can cause a complicate structure in the trace field by the meridional advection.

• 전기학회논문지
• /
• 제58권2호
• /
• pp.363-368
• /
• 2009

In the paper, we confirmed improvement Noise figure of the entire RF front-end using spiral inductor with PGS(Patterned Ground Shield) and current bleeding techniques. LNA design is to achieve simultaneous noise and input matching. Spiral inductor in input circuit of LNA inserted PGS for betterment of Q-factor. we modeling inductor using EM simulator, so compared with inductor of TSMC 0.18um. We designed and simulation the optimum structure of PGS using Taguchi's method. We confirmed enhancement of noise figure at LNA after substituted for inductor with PGS. Mixer designed using current bleeding techniques for reduced noise. We designed LNA using inductor with PGS and Mixer using current bleeding techniques, so confirmed improvement of noise figure.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.67-76
• /
• 2012

In this paper, collision analysis of the full rake for the Next Generation High-speed EMU is conducted using a 3D/1D hybrid model, which combines 3-dimensional (3D) front-end structure of finite element model and 1-dimensional (1D) multi-body dynamics model in order to analyze train collision with a standard 3D deformable obstacle. The crush forces, passengers' accelerations and energy absorptions of a full rake train can be easily obtained through a simulation of a 1D dynamics model composed of nonlinear springs, dampers and masses. Also the obtained simulation results are very similar to those of a 3D model if an overriding behavior does not occur during collision. The standard obstacle in TSI regulation has been changed from a rigid body to a deformable body, and therefore 3D collision simulations should be conducted because their simulation results depends on the front-end structure of a train. According to the obstacle collision analysis of this study, the obstacle collides with the driver's upper structure after overriding over the front-end module. The 3D/1D hybrid model is effective to evaluate a main energy-absorbing module that is frequently changed during design process and reduce the need time of the modeling and analysis when compared to a 3D full car body.

• 대한지리학회지
• /
• 제45권6호
• /
• pp.748-765
• /
• 2010

본 연구에서는 장마철 우리나라의 지역 평균 강수량을 이용하여 강수의 지속성에 따른 종관 특성의 차이를 살펴보았다. 그 결과 일강수량 10mm 이상이 4일 이상 지속되는 강수(장기 강수)와 1~2일에 그치는 강수(단기 강수) 사이에는 종관 특성에 차이가 있음을 알았다. 장기 강수의 경우 우리나라 동쪽에 기압능이 발달, 저기압과 전선의 정체를 유도하였고, 또 강수 1일 전에 찬 공기가 화중지방으로 남하, 전선이 활발해져 강수의 지속성에 기여하였다. 단기 강수의 경우 저기압이 우리나라를 정체 없이 통과하였다. 또한 장기 강수와 단기 강수의 경우에 우리나라 부근의 전선이 대류권 전체에 미치는 경압성이 큰 구조를 보였다. 장기 강수의 전선 구조가 일본 남서부 지역 장기 강수의 경우와 다르며, 단기 강수의 경우는 양 지역에서 같다. 이는 장마가 반드시 일본 바이우(Baiu)의 연장선상에 있는 것은 아님을 의미한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1376-1379
• /
• 1996

In this paper a GPS receiver is developed using commercial chipsets. GP2010 RF front end and GP2021 Multi-channel correlator of GEC PLESSY are adapted in designing the receiver hardware. MC 68340 is used for controlling the correlator GP2021 and implementing the navigation processing. Also presented are some test results of the developed receiver whose software has an interrupt driven structure rather than common real-time kernel based structure.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.646-654
• /
• 2005

철도지하횡단공사는 횡단구조물 축조시 개착식과 비개착식 공법으로 구별되는데 개착식 공법은 열차의 비운행시간을 고려하여 시공하는 극히 제한적인 공법인데 반하여 비개착식은 열차의 속도 및 운행시간에 제약을 받지 않는 특징을 갖고 있으며 안전하고 신속한 시공의 장점을 갖고 있다. 비개착식 공법 중 Front Jacking 공법은 소구경의 강관을 압입하여 구조물과의 마찰력과 토압을 최소화 시킨 후 현장에서 제작한 전단면 Precast Box 선단부에 PC강연선과 유압Jack을 이용하여 박스를 지중에 견인하는 공법으로 시공시 안정성과 열차의 정시성 확보가 유리하여 많이 적용되고 있다. 이 공법은 박스단면의 크기 및 연장, 토질조건에 관계없이 시공가능하며 친환경적인 시공을 할 수 있다. 본 고에서는 Front Jacking 공법이 적용된 대전동서관통대로의 철도횡단 시공사례를 소개하고자 한다.

• Journal of the korean society of oceanography
• /
• 제32권3호
• /
• pp.93-102
• /
• 1997

Coastal circulations during the (surface condition of an) idealized cold-air outbreak are numerically investigated with two-dimensional, non-hydrostatic model in which a constant bottom-slope exists. The atmospheric forcing during a cold-air outbreak is incorporated as the surface cooling and the wind stress. When the offshore angle of the wind-stress vector, defined as the angle measured from the alongshore axis, is smaller than 45 degrees, a strong downwelling circulation develops near the coast. A sharp density front, which separates the vertically homogeneous region from the offshore stratified region, is formed near the coast and propagates offshore with time. Onshore side of the density front, small-scale circulation cells which are aligned in the direction perpendicular to the bottom begin to develop as the near-coast homogeneous region broadens. The surface cooling enhances greatly the development of the surface mixed layer by convective motions due to hydrostatic instability. The convective motions reach far below the hydrostatically unstable layer which is attached to the surface. The small-scale circulation cells are appreciably modified by the convetion cell and the density front develops far offshore compared to the case of no surface cooling. As to the effect of the bottom slope, the offshore distance of the density front increases (decreases) as the bottom slope decreases (increases), which results from the fact that the onshore volume-transport (Ekman transport) of the low-density upper seawater remains almost constant when the wind-stress is maintained constant. It is shown that the bottom slope is an essential factor for the formation of both the density front and the alongshore current when the surface cooling is the only forcing.

• 한국산학기술학회논문지
• /
• 제11권3호
• /
• pp.821-826
• /
• 2010

도어락 스위치(Door-lock switch)는 드럼세탁기, 식기 세척기 등 회전이나 열이 발생되어 작동 할 때 임의로 열지 못하도록 하는 가전제품에 쓰이는 도어 안전잠금장치로 드럼세탁기에서는 없어서는 안 되는 중요한 부품 중의 하나이다. 드럼 세탁기 도어는 소비자가 사용 할 때 느낌을 가지는 부분으로 항상 안전성과 동시에 감성이 뒤따르는 부품이기도 하다. 본 논문은 드럼세탁기의 도어에 감성과 관련된 요소들을 조사하였으며, 도어락 스위치의 기구적인 구조들을 파악한 뒤 드럼세탁기에 장착하였을 때 열림력, 닫힘력을 측정할 수 있는 지그와 소프트웨어를 제작하고 측정한 힘의 그래프를 분석하여 사용자에 의해 평가한 후, 드럼세탁기 도어락 스위치의 구조에 따른 감성에 차이점을 찾아보고 시스템의 사용을 검증하였다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.179-184
• /
• 2005

In the present study, conceptual design of the main wing for 20 seats WIG{wing in Ground Effect) flight vehicle, which will be a high speed maritime transportation system for the next generation, was performed. The high stiffness and strength Carbon-Epoxy material was used for the major structure and the skin-spar with a foam sandwich structural type was adopted for improvement of lightness and structural stability. As a design procedure for this study, firstly the design load was estimated with maximum flight load, and then flanges of the front and the rear spar from major bending load and the skin structure and the webs of the spars were preliminarily sized using the netting rules and the rule of mixture. In order to investigate the structural safety and stability, stress analysis was performed by Finite Element Codes such as NASTRAN/PA TRAN[6] and NISA II [7]. From the stress analysis results, it was confirmed that the upper skin structure between the front spar and rear spar was very unstable for the buckling. Therefore in order to solve this problem, a middle spar and the foam sandwich structure at the upper skin and the web were added. After design modification, even thought the designed wing weight was a little bit heavier than the target wing weight, the structural safety and stability of the final design feature was confirmed. Moreover, in order to fix the wing structure at the fuselage, the insert bolt type structure with six high strength bolts was adopted for easy assembly and removal.

• Journal of Mechanical Science and Technology
• /
• 제17권3호
• /
• pp.400-408
• /
• 2003

A study on the progressive inelastic deformation behavior of the 316 L stainless steel cylindrical structure with plate-to-shell junction under moving temperature front was carried out by structural test and analysis. The structural test intends to simulate the thermal ratcheting behavior occurring at the reactor baffle of the liquid metal reactor as free surface of hot sodium pool moves up and down under plant transients. The thermal ratchet load that heats the specimen up to 550$^{\circ}C$ was applied repeatedly and residual deformation was measured. The thermal ratcheting test was carried out with two types of cylindrical structures, one with plate to-shell junction and the other without the junction to investigate the effects of the geometric discontinuities on the global ratcheting deformation. The temperature distributions of the test specimens were measured and were used for the ratcheting analysis. The ratchet deformations were analyzed with the constitutive equation of the non-linear combined hardening model. The analysis results were in good agreement with those of the structural tests.