• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.94-106
• /
• 2022

In order to increase timber self-sufficiency, Korea's 6th Basic Forest Plan aims to increase the density of forest roads to 12.8 m ha^-1 by 2037. However, due to rapid re-forestation, current management infrastructure is insufficient, with just 4.8 m ha^-1 of forest roads in 2017. This is partly due to time and cost limitations on the process of forest road feasibility evaluation, which considers factors such as topography and forest conditions. To solve this problem, we propose an eco-friendly and efficient forest road network planning method using a geographic information system (GIS), which can evaluate a potential road site remotely based on spatial information. To facilitate such planning, this study identifies forest road construction priorities that can be evaluated using spatial information, such as topography, forest type and forest disasters. A method of predicting the optimal route to connect a forest road with existing roads is also derived. Overlapping analysis was performed using GIS-MCE (which combines GIS with multi-criteria evaluation), targeting the areas of Cheongsong-gun and Buk-gu, Pohang-si, which have a low forest-road density. Each factor affecting the suitability of a proposed new forest road site was assigned a cost, creating a cost surface that facilitates prioritization for each forest type. The forest path's optimal route was then derived using least-cost path analysis. The results of this process were 30 forestry site recommendations in Cheongsong-gun and one in Buk-gu, Pohang-si; this would increase forest road density for the managed forest sites in Cheongsong-gun from 1.58 m ha^-1 to 2.55 m ha^-1. This evaluation method can contribute to the policy of increasing timber self-sufficiency by providing clear guidelines for selecting forest road construction sites and predicting optimal connections to the existing road network.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.2
• /
• pp.17-28
• /
• 2022

The application of supplemental activated biochar pellet fertilizers (ABPFs) was evaluated by investigating key factors such as changes of surface paddy water and soil chemical properties and rice growth responses during the growing season. The treatments consisted of control, activated rice hull biochar pellet (ARHBP-40%), and activated palm biochar pellet (APBP-40%) applications. It was shown that the lowest NH₄⁺-N and PO₄^--P concentrations were observed in surface paddy water to the ARHBP-40%, while the NH₄⁺-N concentration in the control was abruptly decreased until 30 days after transplant in the soil. However, the lowest NH₄⁺-N concentration in the blended biochar application was 9.18 mg L^-1 at 1 day of transplant, but its ABPFs application was observed to be less than 1 mg L^-1 at 56 days after transplant. The lowest PO₄^--P concentration in paddy water treated ARHBP-40% ranged from 0.06 mg L^-1 to 0.08 mg L^-1 until 30 days after transplant among the treatments. For the paddy soil, the NH₄⁺-N concentration in the control was abruptly decreased from 177.7 mg kg^-1 to 49.4 mg kg^-1, while NO₃^--N concentration was highest, 13.2 mg kg^-1 in 14 days after transplant. The P₂O₅ concentrations in the soils increased from rice transplants until the harvesting period regardless of the treatments. The highest K₂O concentration was 252.8 mg kg^-1 in the APBP-40% at 84 days after transplant. For the rice growth responses, plant height in the control was relatively high compared to others, but grain yield was not significantly different between the control and ARHBP-40%. The application of ARHBP-40% can minimize nitrogen and phosphorous application rates into the agro-ecosystem.

• 지역과문화
• /
• v.7 no.2
• /
• pp.173-202
• /
• 2020

This study aims to enhance the family-friendliness of the region by examining the relationship between family relations and the community environment, and objectively comparing the local environment surrounding the family. To this end, we reviewed the areas of socio-cultural and economic sectors that affect the family relationship satisfaction, and in particular, analyzed the trend of changes in regional index by utilizing the Korean Family Happiness Composite Index (KFHCI) developed as a community indicators. This index utilizes community indicators published in the National Statistical Portal's "e-Region indicators," and these variables are related to family relationship satisfaction. Therefore, this study compared the seven areas of the Family Happiness Composite Index (Population Family, Health Culture, Education, Income Consumption, Employment Labor, Housing Transportation, Environment and Social Integration) by region, and examined the trends for 10 years. According to the study, the average score of KFHCI's entire region was rising from 2008 to 2018. Overall, the community environment that affects family relationship satisfaction is also improving. The regions belonging to the upper level were Jeonnam, Gangwon, Chungnam, Jeonbuk, and Gyeongbuk. Areas belonging to the lower level are Seoul, Busan, Daegu, Incheon, and Gwangju. In almost sectors, the lower-level regions did not have sufficient physical infrastructure compared to population density and over-density, and improved little by little, but not enough to reflect the needs of local people and improve the quality of life. In the future, we should develop more regular and complementary indicators to develop customized policies for each region that can improve the quality of family relationships. It will also be necessary to study the impact of each index field when a socioeconomic crisis occurs due to social disasters, and try to change indicators

• Journal of Mushroom
• /
• v.20 no.3
• /
• pp.173-177
• /
• 2022

Mushroom production in Korea is concentrated on five major mushroom types. To create a new source of income for farmers, it is necessary to establish new mushroom production and marketing systems. This study was conducted to evaluate the marketability of and establish a marketing strategy for Pleurotus nebrodensis variety 'Uram'. The evaluation of distributors showed that it was necessary to cultivate mushrooms of uniform shape and size, to compensate for their low storability, and to sell them in small packages. The consumer evaluation showed that the texture of P. nebrodensis had the highest level of satisfaction for quality, but the levels of satisfaction for size and shape were low. In the consumer evaluation, as in the distributor evaluation, improvements in cultivation were found to be necessary, as the storage time is short due to a high moisture content. An evaluation of the market gave the following results regarding the marketing strategy. It was found to be necessary to consider the production of mushrooms of a uniform shape and size and sell them in small packages in the range of 150 to 300 g. The price of the mushrooms should be set using a high-end strategy for high-end sales. The mushrooms should be introduced to local food and eco-friendly stores in the early stages of production. Subsequently, if farmhouse production increases, shipments should be made to wholesale markets through a regular contract. Finally, considering that P. nebrodensis is an unfamiliar mushroom to consumers, it is necessary to promote it by increasing the accessibility of consumers through tasting events and experience groups.

• Clean Technology
• /
• v.28 no.3
• /
• pp.218-226
• /
• 2022

As a result of the recent social transformation towards a hydrogen economy and carbon-neutrality, the demands for hydrogen energy have been increasing rapidly worldwide. As such, eco-friendly hydrogen production technologies that do not produce carbon dioxide (CO₂) emissions are being focused on. Among them, ammonia (NH₃) is an economical hydrogen carrier that can easily produce hydrogen (H₂). In this study, Ru/Al₂O₃ catalyst coated onmetallic monolith for hydrogen production from ammonia was prepared by a dip-coating method using a catalyst slurry mixture composed of Ru/Al₂O₃ catalyst, inorganic binder (alumina sol) and organic binder (methyl cellulose). At the optimized 1:1:0.1 weight ratio of catalyst/inorganic binder/organic binder, the amount of catalyst coated on the metallic monolith after one cycle coating was about 61.6 g L^-1. The uniform thickness (about 42 ㎛) and crystal structure of the catalyst coated on the metallic monolith surface were confirmed through scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. Also, a numerical optimization regression equation for NH3 conversion according to the independent variables of reaction temperature (400-600 ℃) and gas hourly space velocity (1,000-5,000 h^-1) was calculated by response surface methodology (RSM). This model indicated a determination coefficient (R²) of 0.991 and had statistically significant predictors. This regression model could contribute to the commercial process design of hydrogen production by ammonia decomposition.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.67-76
• /
• 2021

Biogasification is a technology that produces environmentally friendly fuel using methane gas generated in the process of stably decomposing and processing organic waste. Biogasification is the most used method for energy conversion of organic waste with high moisture content, and is a useful method for organic waste treatment following the prohibition of direct landfill (2005) and marine dumping (2013). Due to African Swine Fever (ASF), which recently occurred in Korea, recycling of wet feed is prohibited, and consumers such as dry feed and compost are negatively recognized, making it difficult to treat food waste. Accordingly, biogasification is attracting more attention for the treatment and recycling of food waste. Korea's energy consumption amounted to 268.41 106toe, ranking 9th in the world. However, it is an energy-poor country that depends on foreign imports for about 95.8% of its energy supply. Therefore, in Korea, the Renewable Energy Portfolio Standard (RPS) is being introduced. The domestic RPS system sets the weight of the new and renewable energy certificate (REC, Renewable energy certificate) of waste energy lower than that of other renewable energy. Therefore, an additional incentive system is required for the activation of waste-to-energy. In this study, the operation of an anaerobic digester that treats food waste, food waste Leachate and various organic wastes was confirmed. It was intended to be used as basic data for preparing the waste-to-energy incentive system through precise monitoring for a certain period of time. Four sites that produce biogas from organic waste and use them for power generation and heavy gas were selected as target facilities, and field surveys and sampling were conducted. Basic properties analysis was performed on the influent sample of organic waste and the effluent sample according to the treatment process. As a result of the analysis of the properties, the total solids of the digester influent was an average of 12.11%, and the volatile solids of the total solids were confirmed to be 85.86%. BOD and CODcr removal rates were 60.8% and 64.8%. The volatile fatty acids in the influent averaged 55,716 mg/L. It can be confirmed that most of the volatile fatty acids were decomposed and removed with an average reduction rate of 92.3% after anaerobic digestion.

• Research in Plant Disease
• /
• v.28 no.2
• /
• pp.69-81
• /
• 2022

This study was performed to screen the efficacy of antagonistic bacterial isolates from various sources against the bacterial fruit blotch (BFB) causing pathogen (Acidovorax citrulli) in cucurbit crops. In addition, plant growth promoting traits of these antagonistic bacterial isolates were characterized. Two thousand seven hundred ninety-four microorganisms were isolated from the collected samples. Molecular identification revealed two A. citrulli out of 2,794 isolates. In vitro antagonistic results showed that, among the 28 antagonistic bacterial isolates, 24 and 14 bacterial isolates exhibited antagonism against HPP-3-3B and HPP-9-4B, respectively. Antagonistic and growth promotion characterization of the antagonistic bacterial isolates were further studied. Results suggested that, 4 antagonistic bacteria commonly showed both antagonism and growth promotion phenotypes. Moreover, 3 isolates possessed growth promoting activities. Overall results from this study suggests that BFB causing bacterial pathogen (A. citrulli) was suppressed in in vitro antagonism assay by antagonistic bacterial isolates. Furthermore, these antagonistic bacterial isolates possessed growth promotion and antagonistic enzyme production ability. Therefore, data from this study can provide useful basic data for the in vivo experiments which ultimately helps to develop the eco-friendly agricultural materials to control fruit rot disease in cucurbit crops in near future.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.13-29
• /
• 2022

According to the revision of the Convenience Act for Persons with Disabilities, parks and park facilities where the first park development plan is established after December 4, 2021 are mandatory, and parks must be equipped with convenience facilities for the disabled. Hence, this study aims to derive the improvements of the park evaluation index by analyzing the park certification evaluation index, the building certification evaluation index of park facilities, and the evaluation reports of the current certification status cases. As a research method, first, the certification of parks and park facilities were compared and reviewed with the Park Green Act, and differences in the certification process and certification performance were compared and analyzed. Second, differences and common items were derived by analyzing barrier free (BF)-certification evaluation indicators for parks and buildings. Third, improvement plans were derived after analyzing differences and problems in 4 BF-certified parks and four building certification cases of park facilities in certified parks, focusing on the self-evaluation report and examination results. As a result of analyzing the park and building evaluation indicators, the items for which the evaluation purpose, evaluation method, and evaluation items were commonly applied to 7 access roads for each facility, 5 parking areas for the disabled, 2 guide facilities for information facilities, 14 in 5 categories of sanitation facilities, and 1 for other facilities. In the case of sanitation facilities, there is no case where it was evaluated as a park. If the park does not have an attached toilet, the park is certified as a building. Hence, it would be essential to establish the concept of an attached toilet and discuss the application of the evaluation index on the park sanitation facility. The score of buildings in parks and park facilities was lower than that of the self-evaluation results, and the certification grades of buildings declined in three cases. The items with the highest standard deviation were BF walking continuity for parks and the path to the main entrance among access roads for buildings. As a result of analyzing the park and building evaluation results of 19 common evaluation items except for sanitary facilities, the difference in the grades of the evaluation items for each case site except for one item appeared. Therefore, applying common detailed calculation criteria for items evaluated in common with parks and buildings is needed. Since sanitation facilities have no cases of park certification and are not certified as buildings, it is essential to establish the concept of attached toilets and discuss the application of park sanitation evaluation indicators. It is necessary to develop an evaluation index suitable for the characteristics of the park, such as adjusting the items that are not evaluated in parks and establishing an evaluation index considering the ones of parks. It expects that this study would be used as primary data for improving park certification indicators.

• Journal of Mushroom
• /
• v.21 no.3
• /
• pp.132-139
• /
• 2023

Light plays an important role in fruit-body development and morphology during Pleurotus spp. cultivation. To understand the effects of light color on fruit-body properties, we evaluated the fruit-body characteristics of Pleurotus spp. Varieties cultivated under blue, red, and purple LED light sources. The main results are as follows: The overall fruit-body shape showed differences depending on the color of the LED light. The fruit-bodies of mushroom cultivated under blue and purple light were generally similar to the mushroom shapes typically produced, while those of mushroom cultivated under green light were abnormally shaped, probably due to the absence of effective light source. The average cap lightness of mushrooms cultivated under blue, green, and purple LED lights was 57.0, 57.4, and 59.4, respectively. The average cap lightness of all varieties except Wonhyeong1ho and Hwang-geumsantari cultivated under the three LED light sources were statistically significantly different (P<0.05). The cap redness varied significantly depending on the LED lighting and variety. Only Gonji7hoM, the cap color mutant of Gonji7ho, showed negative cap redness values under all three LED light sources. Among the eight varieties excluding Gonji7ho, the highest cap redness was observed when cultivated under the blue LED. The average harvest weight of the varieties cultivated under purple, blue, and green LED light were 68.0, 58.3, and 50.1 g, respectively. The yield of Gonji7ho, the mushroom variety with the highest yield, cultivated under blue, green, and purple LED light were 92.8, 77.1, and 98.6 g, respectively. The earliness when grown under the purple, blue, and green LED lights were 5.3, 5.8, and 5.8 days, respectively. Among the varieties, six, three, and two cultivars showed the shortest earliness under the purple, green, and blue LED, respectively. The fruit-body lengths were 66.4, 51.8, and 46.8 mm when cultivated under green, purple, and blue lights, respectively. These results are expected to serve as a foundation for producing mushrooms with traits demanded in the market.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.3
• /
• pp.55-64
• /
• 2023

This batch experiment was conducted to investigate the patterns of major plant nutrients in the leachates from the soil that was incorporated with rice hull biochar adjusted pH with dry fish powder utilizing rice hull biochar for loading the soil microorganisms. The rice hull biochar adjusted pH between 6.0 and 7.0, and the mixture ratio of rice hull biochar and dry fish powder was 4:6. The treatments consisted of three; the soil incorporated with rice hull biochar non-adjusted pH with dry fish powder as control (RB + DF), the soil incorporated with rice hull biochar adjusted pH by pyroligneous acid solution and dry fish powder (RBP+DF), and the soil incorporated with rice hull biochar adjusted pH by citric acid solution and dry fish powder (RBC+DF). NH₄-N, NO₃-N, PO₄-P, and K concentrations in the leachates were analyzed during incubation. The accumulated NH₄-N and PO₄-P concentrations in the leachates from the RBC+DF treatment were the highest during leaching periods. The highest accumulated NO₃-N and K concentrations in the leachates from the RBP+DF treatment were observed. It observed that NH₄-N and PO₄-P were more released in the adjusted citric acid solution, but NO₃-N and K were less released than those in the pyroligneous acid solution due to their low absorption capacity. Furthermore, it is necessary to investigate crop growth responses to the soil incorporated with adjusted pH rice hull biochar and dry fish powder for loading soil microorganisms.