• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.320-320
• /
• 2016

Nanocrystalline Carbon thin films have numerous applications in different areas such as mechanical, biotechnology and optoelectronic devices due to attractive properties like high excellent hardness, low friction coefficient, good chemical inertness, low surface roughness, non-toxic and biocompatibility. In this work, we studied the comparison of pure DC power and pulsed DC power in plasma sputtering process of carbon thin films synthesis. Using a close field unbalanced magnetron sputtering system, films were deposited on glass and Si wafer substrates by varying the power density and pulsed DC frequency variations. The plasma characteristics has been studied using the I-V discharge characteristics and optical emission spectroscopy. The films properties were studied using Raman spectroscopy, Hall effect measurement, contact angle measurement. Through the Raman results, ID/IG ratio was found to be increased by increasing either of DC power density and pulsed DC frequency. Film deposition rate, measured by Alpha step measurement, increased with increasing DC power density and decreased with pulsed DC frequency. The electrical resistivity results show that the resistivity increased with increasing DC power density and pulsed DC frequency. The film surface energy was estimated using the calculated values of contact angle of DI water and di-iodo-methane. Our results exhibit a tailoring of surface energies from 52.69 to $55.42mJ/m^2$ by controlling the plasma parameters.

• Journal of the Korean Wood Science and Technology
• /
• 제36권6호
• /
• pp.1-12
• /
• 2008

주요 국산재의 여러 가지 응용물성을 지난 3년에 걸쳐 조사하였다. 전보(강 외 4인 2008, 변 외 5인 2008)에 이어 본보에서는 우리나라의 활엽수 주요 수종인 백합나무, 거제수나무, 오동나무를 재료로 사용하였다. 매년 동일한 장치와 실험조건으로 실험하였기 때문에 모든 수종에 대한 결과를 상호 비교 할 수 있었다. 수분흡착성 실험은 80메시 목분을 이용하였으며, 넓은 범위의 상대습도조건에 따른 평형 함수율과 흡착등온선을 구하였다. 열전도율과 열확산률은 열선열전도장치를, 전기의 부피저항률과 저 항은 고전기저항계를 이용하여 측정하였다. 정목재와 판목재의 열적 전기적 특성차이가 관찰되었는데 이는 해부학적 차이에 의한 것으로 보인다. 음향적 성질은 음향측정시스템을 사용하여 동적탄성률, 내부마찰을 측정하였다. 본 논문의 결과들은 목재구조물 설계, 휴대용 목재수분계 보정, 음향적 성질 등에 필요한 기본 자료를 제공한다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.1-10
• /
• 2008

주요 국산재의 여러 가지 응용물성을 매년 3수종씩, 3년에 걸쳐 조사하였다. 전보에 이어 우리나라의 침엽수 대표 수종인 잣나무 및 낙엽송을 사용하였다. 매년 동일한 장치와 실험조건으로 실험하였기 때문에 모든 수종에 대한 결과를 상호 비교할 수 있었다. 수분흡착성 실험은 목분을 이용하였으며, 넓은 범위의 상대습도조건에 따른 평형함수율과 흡착등온선을 구하였다. 열전도율과 열확산률은 열선열전도장치를, 전기의 부피저항률과 저항은 고전기저항계를 이용하여 측정하였다. 정목재와 판목재의 열적 전기적 특성차이가 관찰되었는데 이는 해부학적 차이에 의한 것으로 보인다. 음향적 성질은 음향측정시스템을 사용하여 동적탄성률, 내부마찰을 측정하였다. 본 논문의 결과들은 목재구조물 설계, 휴대용 목재수분계 보정, 음향적 성질 등에 필요한 기본 자료를 제공한다.

• Journal of the Korean Wood Science and Technology
• /
• 제36권3호
• /
• pp.70-84
• /
• 2008

국산재의 여러 가지 응용물성을 매년 3수종씩, 3년에 걸쳐 조사하였다. 첫 수종으로 우리나라의 대표 수종인 소나무를 사용하였다. 매년 동일한 장치와 실험조건으로 실험하였기 때문에 모든 수종에 대한 결과를 상호 비교할 수 있다. 수분흡착성 실험은 목분을 이용하였으며, 가열처리조건에 따른 평형함수율과 흡착등온곡선을 구하였다. 열전도율과 열확산률은 열선열전도장치를, 전기의 부피저항률과 저항은 고전기저항계를 이용하여 측정하였다. 정목재와 판목재의 열적 전기적 특성차이가 관찰되었는데 이는 해부학적 차이에 의한 것으로 보인다. 음향측정시스템을 사용하여 동적탄성률, 내부마찰을 측정하였다. 본 논문의 결과들은 목재구조물 설계, 휴대용 목재수분계 보정, 비파괴검사 등에 필요한 기본 자료를 제공한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권4호
• /
• pp.270-274
• /
• 2016

양 벽면이 수축되는 채널에서 ${\vee}/{\wedge}$형 리브의 각도가 열전달에 미치는 효과를 실험적으로 조사하였다. 한 벽면에만 설치된 ${\vee}/{\wedge}$형 리브의 충돌 각은 각각 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$ 그리고 $90^{\circ}$이다. 리브의 높이(e)는 10 mm 그리고 리브 간격(p)과 높이(e)비는 10으로 제작하였다. 길이가 1,000 mm인 시험 부는 입구의 단면적은 $100mm{\times}100mm$, 출구는 $50mm{\times}100mm$으로 제작하였다. 레이놀즈수가 22,000에서 75,000까지의 범위에서 실험을 수행하였다. 연구결과 전체적으로 레이놀즈 수가 높을수록 누셀트 수가 컸고, ${\wedge}$형 $45^{\circ}$ 리브가 가장 누셀트 수가 컸다.

• 대한조선학회논문집
• /
• 제52권4호
• /
• pp.356-363
• /
• 2015

Microbubbles moving in the turbulent boundary layer are visualized and investigated in the point of frictional drag reduction. The turbulent boundary layer is formed beneath the surface of the 2-D flat plate located in the tunnel test section. The microbubble generator produces mean bubble diameter of 30 – 50 μm. To capture the micro-bubbles passing through the tiny measurement area of 5.6 mm² to 200 mm², the shadowgraphy system is employed appropriately to illuminate bubbles. The velocity field of bubbles reveals that Reynolds stress is reduced in the boundary layer by microbubbles’ activity. To understand the contribution of microbubbles to the drag reduction rate more, much smaller field-of-view is required to visualize the bubble behaviors and to find the 2-D void fraction in the inner boundary layer.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.1003-1009
• /
• 2008

In this study, liquid phase sintered SiC (LPS-SiC) materials were made by hot pressing method. The particle size of nano-SiC powder was 30nm. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of $SiO_2$, ratios of $SiO_2$ contents were changed by five kinds. Materials have been sintered for 1 hour at $1760^{\circ}C$, $1780^{\circ}C$ and $1800^{\circ}C$ under the pressure of 20MPa. The system of sintering additives which affects a property of sintering as well as the influence depending on compositions of sintering additives were investigated by measurement of density, mechanical properties such as flexural strength, vickers hardness and sliding wear resistance were investigated to make sure of the optimum condition which is about matrix of $SiC_f$/SiC composites. The abrasion test condition apply to load of 20N at 100RPM for 20min. Sintered density, flexural strength of fabricated LPS-SiC increased with increasing the sintering temperature. And in case of LPS-SiC with low $SiO_2$, sliding wear resistance has very excellent. Monolithic SiC $1800^{\circ}C$ sintering temperatures and 3wt% have excellent wear resistance.

• Journal of Oral Medicine and Pain
• /
• 제19권1호
• /
• pp.137-149
• /
• 1994

This study was performed to investigate the relationship between Forward Head Posture(FHP) and Craniomandlbular Disorders(CMDs). Many studies reported that there was some relationship between them, however, there is still controversy. So It Is necessary to observe and compare many more patients with CMDs wirh normal controls. For the study 85 patients with CMDs and 37 dental students were selected as experimentals and controls, respectively. And the experimentals were classified Into two groups, that is, TMJ internal derangement group and muscle disorders group according to clinical diagnosis. For measuring the FHP, CROM(Cervical-Range-of-Notion)was used. This goniometer is composed of three part. First, gravity goniometer for flexion and extension. Second, magnetic compass and yoke for rotational movement. And last, forward head arm and vertebra locator for forward head posture. Next T-Scan, electronic occlusal analyzer, was used for recording of occlusal contact state. Other items such as maximum opening, lateral excursion, Helkimo's anamnestic index, and muscle palpation point from Friction's craniomandibular index were checked clinically by one examiner. The result of this study were as follows : 1. In male, control group showed much more measurement in resting forward head posture than did experimental group. But there were not significant differences between groups in female subject. From this results, the author contended that CROM is new measuring system and differ from other goniometers in some aspect, so that results should be re-evaluated 2. Mean value of maximum mouth opening in nearly all groups were greater than 40mm. and mouth opening had a significant correlation with occlusal force and with anamnestic index both sex. 3. Mean value of palpation point had not any correlationship with forward head posture in both sex, but there was significant difference between upper and lower group by rounded shouldes. 4. In summary, there was no significant relationship between forward head posture and sign and symptom of Craniomandibular Disorders.

• International Journal of Ocean System Engineering
• /
• 제2권2호
• /
• pp.106-115
• /
• 2012

In the present study, TiN and CrN films were coated by arc ion plating equipment onto aluminum alloy substrate, A2024. The film thickness was about 4.65 ${\mu}m$. TiN and CrN films were analyzed by X-ray diffraction and energy dispersive X-ray equipments. The Young's modulus and the micro-Vickers hardness of aluminum substrate were modified by the ceramic film coatings. The difference in Young's modulus between substrate and coating film would affect on the wear resistance. The critical load, Lc, was 75.8 N for TiN and 85.5 N for CrN. It indicated from the observation of optical micrographs for TiN and CrN films that lots of cracks widely propagated toward the both sides of scratch track in the early stage of MODE I. TiN film began to delaminate completely at MODE II stage. The substrate was finally glittered at MODE III stage. For CrN film, a few crack can be observed at MODE I stage. The delamination of film was not still occurred at MODE II and then was happened at MODE III. This agrees with critical load measurement which the adhesive strength was greater for CrN film than for TiN film. Consequently, it was difficult for CrN to delaminate because the adhesive strength was excellent against Al substrate. The wear process, which the film adheres and the ball transfers, could be enhanced because of the increase in loading. The wear weight of ball was less for CrN than for TiN. This means that the wear damage of ball was greater for TiN than for CrN film. It is also obvious that it was difficult to delaminate because the CrN coating film has high toughness. The coefficient of friction was less for CrN coating film than for TiN film.

• 공업화학
• /
• 제20권5호
• /
• pp.479-485
• /
• 2009

본 연구에서는 triethanolamine-ester quaternary ammonium salt의 ASCO EQ85 양이온 계면활성제 시스템의 기본 물성을 측정하였으며, 제타 전위 측정 및 quartz crystal microbalance 실험을 통한 계면활성제 흡착량 측정으로부터 pH 조건에 따른섬유 유연력에 관하여 살펴보았다. ASCO EQ85 계면활성제의 CMC는 약 $3{\times}10^{-3}mol/L$이며, CMC에서의 표면장력은 약 40 mN/m이었다. $25^{\circ}C$에서 1 wt% 계면활성제 수용액과 n-dodecane 사이의 계면장력을 spinning drop tensiometer를 사용하여 pH에 따라 측정한 결과, pH 증가에 따라 계면장력은 약간 증가하였으나 평형에 도달하는 시간은 pH에 관계없이 거의 일정하였다. 계면활성제 흡착량은 농도에 비례하여 증가하는 경향을 보였으며, 수용액의 pH 조건에 따라 계면활성제 흡착량이 변화하였다. 계면활성제 수용액의 pH에 따라 유연력을 측정한 결과, pH 증가에 따라 양이온 계면활성제로 세정한 섬유의 마찰계수가 증가하였으며, 양이온 계면활성제 수용액의 pH가 산성 조건일 때 섬유의 유연 효과가 크다는 것을 확인할 수 있었다. 계면활성제 수용액의 거품 안정성을 측정한 결과, 수용액의 pH가 증가함에 따라 거품의 부피가 반으로 줄어드는데 걸리는 시간이 증가하고 거품 안정성이 증가하였다.