• Journal of Power Electronics
• /
• v.15 no.6
• /
• pp.1673-1681
• /
• 2015

A low dropout (LDO) regulator with a wide-bandwidth is proposed in this paper. The regulator features a Human Body Model (HBM) 8kV-class high robustness ElectroStatic Discharge (ESD) protection circuit, and two error amplifiers (one with low gain and wide bandwidth, and the other with high gain and narrow bandwidth). The dual error amplifiers are located within the feedback loop of the LDO regulator, and they selectively amplify the signal according to its ripples. The proposed LDO regulator is more efficient in its regulation process because of its selective amplification according to frequency and bandwidth. Furthermore, the proposed regulator has the same gain as a conventional LDO at 62 dB with a 130 kHz-wide bandwidth, which is approximately 3.5 times that of a conventional LDO. The proposed device presents a fast response with improved load and line regulation characteristics. In addition, to prevent an increase in the area of the circuit, a body-driven fabrication technique was used for the error amplifier and the pass transistor. The proposed LDO regulator has an input voltage range of 2.5 V to 4.5 V, and it provides a load current of 100 mA in an output voltage range of 1.2 V to 4.1 V. In addition, to prevent damage in the Integrated Circuit (IC) as a result of static electricity, the reliability of IC was improved by embedding a self-produced 8 kV-class (Chip level) ESD protection circuit of a P-substrate-Triggered Silicon Controlled Rectifier (PTSCR) type with high robustness characteristics.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.11-19
• /
• 2009

Multicarrier direct sequence code division multiple access (MC DS-CDMA) is an attractive technique for achieving high data rate transmission. This is valid regardless of whether or not the potentially large peak-to-average power ratio (PAPR) is an important factor for its application. On the other hand, code select CDMA (CS-CDMA) is an attractive technique with constant amplitude transmission of multicode signal regardless of subchannels. This is achieved by introducing a code select method. In this paper, we propose a new multiple access scheme based on the combination of MC DS-CDMA and CS-CDMA. The proposed scheme, which we call MC CS-CDMA, includes as special cases the subclasses of MC DS-CDMA and CS-CDMA. This paper investigates the performance of these systems over a multipath frequency selective fading channel using a RAKE receiver with maximal ratio combiner. In addition, the PAPR of the proposed system is compared with that of both MC DS-CDMA and CS-CDMA. Simulation results demonstrate that the proposed system provides better PAPR reduction than MC DS-CDMA, at the expense of the complexity of the receiver and the number of available users. The numerical result demonstrates that the proposed system has better performance than MC DS-CDMA due to the increased processing gain and time diversity gain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.338-347
• /
• 2007

In this paper, a weighted block adaptive channel estimation (WBA-CE) for a space-time block-coded (STBC) single-carrier transmission with a cyclic-prefix is proposed. In operation of the WBA-CE, a STBC matrix-wise block for filter input symbols is first formulated. Applying a weighted a posteriori error vector-based least-square (LS) criterion for this block, the coefficient correction terms of the WBA-CE are then computed. An approximate steady-state excess mean-square error (EMSE) of the WBA-CE for the stationary optimal coefficient is also analyzed. Simulation results show in a time-varying typical urban (TU) channel that the proposed channel estimator provides better bit-error-rate (BER) performances than conventional algorithms such as the NLMS and RLS channel estimators.

• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.61-68
• /
• 1999

The purpose of this study is to present controversial point and reform measurements by analysing factors haying important effect on selection of upper gastrointestinal study in total health promotion. We examined 200 persons for this study, who visited for upper gastrointestinal study from January to February in 1999. We classified this group into Endoscopy, Upper gastrointestinal series, and sleeping endoscopy. We also investigated standard of satisfaction and factors having effect on selection of each study. As a results, in the motive of selection, Item of 'making accurate observation' and 'without pain' was 39.3% and 34.7%, respectively. In this study, sleeping endoscopy was 45.7%, but on the other side upper gastrointestinal series was low 22.6%(P<0.05). In the standard of preference of study, the man was 55.7% in the endoscopy, and the woman was 61.8% in the upper gastrointestinal series(P<0.05). The standard of preference of upper gastrointestinal series show that it was satisfied on the whole irrespective of sex, dwelling place, age, occupation, and level of education. In the selection of study, one's own will was showed the highest frequency, and family inducement was showed second(P<0.05). Persons over 60% were examined before the same study. Selection of upper gastrointestinal series was 47.9% of person with normal findings, and endoscopy and sleeping endoscopy was over 70% with gastritis, gastric and duodenal(P<0.01). For one's accurate selection of examination, it is important that objective and credible information should be given to a recipient for examination.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.3 s.357
• /
• pp.26-34
• /
• 2007

This Paper describes a chip design technique for body composition analyzer based on the BIA (Bioelectrical Impedance Analysis) method. All the functions of signal forcing circuits to the body, signal detecting circuits from the body, Micom, SRAM and EEPROMS are integrated in one chip. Especially, multi-frequency detecting method can be applied with selective band pass filter (BPF), which is designed in weak inversion region for low power consumption. In addition new full wave rectifier (FWR) is also proposed with differential difference amplifier (DDA) for high performance (small die area low power consumption, rail-to-rail output swing). The prototype chip is implemented with 0.35um CMOS technology and shows the power dissipation of 6 mW at the supply voltage of 3.3V. The die area of prototype chip is $5mm\times5mm$.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.86-96
• /
• 2013

Unified Speech and Audio Coding (USAC) is the speech/audio codec with the best quality, approved on Final Draft International Standard (FDIS) at MPEG meeting in 2011. Since MPEG conventionally standardizes only the decoder, it is not easy to study on the encoder technologies. Furthermore, Reference Model(RM) shows extremely poor performance. To solve these problems, the open source project(JAME) proposes the methods to make the improved performance of main encoder technologies in USAC. Especially, this paper introduces the encoder modules: the signal classifier for selective operation between two coders, the psychoacoustic model in frequency domain, and window transition technology. Finally, the results of verification test for FDIS and the performance of Common Encoder are appended.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1806-1808
• /
• 2014

We report the successful preparation of gold nanoparticles (Au NPs) using a novel electroreduction process, which is simple, fast, and environmentally friendly (toxic chemicals such as strong reducing agents are not required). Our process allows for the mass production of Au NPs and adequate particle size control. The Au NPs prepared show high biocompatibility and are non-toxic to healthy human cells. By applying radio-frequency (RF) ablation, we monitored the electro-hyperthermia effect of the Au NPs at different RFs. The Au NPs exhibit a fast increase in temperature to $55^{\circ}C$ within 5 min during the application of an RF of 13 MHz. This temperature rise is sufficient to promote apoptosis through thermal stress. Our work suggests that the selective Au NP-mediated electro-hyperthermia therapy for tumor cells under an RF of 13 MHz has great potential as a clinical treatment for specific tumor ablation.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.6
• /
• pp.11-20
• /
• 2019

A Radome protects the radar from the external environment, and as a part of the stealth technology, a frequency-selective surface (FSS) was applied to the radome. Our study investigates the changes in the electrical transmission characteristics of the missile's FSS radome due to aerodynamic heating in various flight scenarios. Accordingly, we designed a FSS radome with a Jerusalem-cross(JSC) geometry and referred the missile flight scenario in the precedent research. Subsequently, electrical transmission characteristics affected by aerodynamic heating were numerically analyzed over time according to the position of radome. As a result, we found that the average transmission value maximally varies -14.3 dB compared to the initial bandwidth owing to changes in electrical transmission characteristics in flight scenarios.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.94-102
• /
• 1999

This paper is related with the compensation of communication channel characteristics using predistorter, and the considered characteristic is the additive noise, phase rotation and frequency selective fading which occurred in communication channel. Predistorter can minimize the effect of obstacle element which occured in channel at receiving side by transmitting the predistortion of signal after modulation, the coefficient of inverse electrical charateristic of communication channel is performed at transmitting side. For this purpose, the predistorter is designed by using Tricepstrum Equalization Algorithm which is adaptive equlizer algorithm, and the receiving side must transmit the probing signal to transmitting side. Using the probing signal, the transmitting side can obtain the inverse characteristic coefficient of communication channel, and this probing signal must be transmitted periodically. We assumed that the channel characteristic do not change during this one period. As a result of computer simulation, we confirmed that the performance of predistorter was fairly good as same as the adaptive equalizer, and this technique have a effectiveness that can be used in the forward channel of mobile communication in order to achieve high speed transmission.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1269-1274
• /
• 2010

Wireless communication channels with the most severe multipath fading phenomenon that appears each time a different delay is caused by the frequency selective fading. At this time, ISI due to the performance degradation of wireless communication channels and data transfer speed gives the constraints. OFDM technique can remove ISI inserting longer guard interval than channel delay spread of channel between symbol. However, the multi-path delay of the channel to be serious with the guard interval can not eliminate ISI. In this case, using the equalizer must compensate. Especially, use of equalizer is need absolutely as data rate becomes high speed. In this paper, we analyze the BER performance with pre-equalization for MIMO-OFDM over fading channel. The results of this paper can be applied to MIMO-OFDM system with equalization.