• 제목/요약/키워드: Frequency gain

검색결과 2,411건 처리시간 0.03초

초고주파용 선형 이득 등화기 설계 및 제작 (Design and Implementation of Linear Gain Equalizer for Microwave band)

  • 김규환
    • 한국산학기술학회논문지
    • /
    • 제17권11호
    • /
    • pp.635-639
    • /
    • 2016
  • 초고주파 대역에서 사용하는 소자들은 기생성분으로 인하여 주파수가 증가함에 따라 이득이 감소한다. 이러한 특성을 보상하기 위해 전자전과 같은 광대역 시스템에서는 반대의 기울기를 갖는 선형 이득 등화기가 필요하다. 본 논문에서는 18~40GHz 대역에서 사용할 수 있는 선형 이득 등화기를 설계하고 제작하였다. 설계와 제작의 오차를 줄이기 위하여 회로설계와 모멘텀 설계를 진행하였다. 구현 주파수 대역 내에서 가능한 기생성분을 최소화하기 위해 thin film 공정을 사용하였으며, 박막저항의 길이에 의한 파장 변화를 최소화하기 위해 100 ohm/square의 sheet resistance로 설계하였다. 본 선형 이득 등화기는 직렬 마이크로스트립 라인에 사분의 일 파장을 갖는 공진기를 저항으로 결합하는 구조이다. 모두 3개의 1/4 파장의 Short 공진기를 사용하였다. 제작된 선형 이득 등화기는 40GHz에서 -5dB 이상의 손실을 가졌으며, 18 ~ 40 GHz 대역에서 6dB 기울기를 나타내었다. 제작된 이득 등화기를 전자전 수신기와 같은 광대역 MMIC들이 다단으로 연결된 장치 내부에 사용한다면 주파수가 증가에 따른 이득 평탄도 악화를 감소시킬 수 있을 것이다.

VCO 이득 변화와 주파수 간격 변화를 줄인 DTV용 광대역 CMOS VCO 설계 (Design of a Wide-Band CMOS VCO With Reduced Variations of VCO Gain and Frequency Steps for DTV Tuner Applications)

  • 고승오;심상미;서희택;김정규;유종근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.217-218
    • /
    • 2008
  • Since the digital TV signal band is very wide ($54{\sim}806MHz$), the VCO used in the frequency synthesizer must also have a wide frequency tuning range. Multiple LC VCOs have been used to cover such wide frequency band. However, the chip area increases due to the increased number of integrated inductors. A general method for achieving both reduced VCO gain(Kvco) and wide frequency band is to use the switched-capacitor bank LC VCO. In this paper, a scheme is proposed to cover the full band using only one VCO. The RF VCO block designed using a 0.18um CMOS process consists of a wideband LC VCO with reduced variation of VCO gain and frequency steps. Buffers, divide-by-2 circuits and control logics the simulation results show that the designed circuit has a phase noise at 100kHz better than -106dBc/Hz throughout the signal band and consumes $9.5{\sim}13mA$ from a 1.8V supply.

  • PDF

Multi-rate MC-CDMA시스템에서의 코드 간 간섭과 주파수 다이버시티와의 관계에 대한 연구 (A Study on the Relation Between Frequency Diversity and Inter Code Interference in the Multi-rate MC-CDMA system)

  • 이규진;이계산;김진영
    • 한국ITS학회 논문지
    • /
    • 제7권5호
    • /
    • pp.131-138
    • /
    • 2008
  • 시스템의 성능은 RMS 지연확산과 도플러 주파수와 같은 채널 변수에 영향을 받는다. 이 논문은 Multi-rate MC-CDMA 시스템에서 주파수 다이버시티와 코드 간 간섭과의 관계에 대하여 연구하였다. Multi-rate MC-CDMA 시스템은 MC-CDMA 시스템보다 다양한 데이터율을 전송할 수 있는 장점이 있을 뿐 아니라, OFDMA와 다르게 주파수 다이버시티 이득을 얻음으로써 성능을 향상시킬 수 있다. 하지만, 확산코드를 사용함으로써 주파수 다이버시티 이득과 코드간 간섭간의 trade-off 관계가 있다. 그러므로 이러한 관계를 평가하여, 시스템을 효율적으로 사용함으로써 성능을 향상시킬 수 있다. 주파수 다이버시티 이득과 코드 간 간섭의 관계를 효과적으로 평가하기 위하여, 우리는 도플러 주파수와 RMS 지연확산을 변화시키며 모의실험을 수행하였고, 그 결과를 분석하였다.

  • PDF

돌고래 휘슬음을 모방한 frequency shift keying 수중통신기법의 다중경로결합 수신 방법 (Multipath combining method for frequency shift keying underwater communications mimicking dolphin whistle)

  • 안종민;이호준;김용철;김완진;정재학
    • 한국음향학회지
    • /
    • 제37권6호
    • /
    • pp.404-411
    • /
    • 2018
  • 본 논문은 수중에서 은밀성을 확보하기 위해 FSK(Frequency Shift Keying)를 이용하여 돌고래 휘슬음을 모방하는 통신 기법과 다중경로 결합 이득을 이용하여 BER(Bit Error Rate) 성능을 높이는 방법을 제안한다. 제안하는 방법은 휘슬음을 짧은 시간 구간으로 나누고 그 구간에 심볼의 직교성을 보장하는 FSK 변조신호를 만든다. 그리고 휘슬음을 모방할 때 다중경로 채널에서 심볼간의 ISI(Inter Symbol Interference)가 줄어드는 특징을 이용하여 다중경로 결합 이득을 얻는 방법이다. 제안한 방법의 성능을 보이기 위해 전산모의실험과 실제 호수실험을 진행하였다. 전산모의실험을 통해 다중경로에 의해 추가적인 다중경로 결합 이득이 발생함을 보였다. 호수 실험에서는 제안된 FSK 방법이 20 msec의 심볼 길이와 900 Hz의 변조 대역을 갖는 경우 다중경로 결합 이득을 얻어 0.002의 BER갖고 0.185의 BER을 갖는 CSS(Chirp Spread Spectrum)보다 우수함을 보였다. 그리고 모방한 신호와 실제 휘슬 신호의 시간-주파수 영역에서 평균 상호 상관 값을 통해 모방도를 분석하여 제안된 FSK방법이 CSS방법에 비해 높은 모방도를 보였다.

마이크로 공진형 센서의 주파수 및 진폭 제어 (Frequency and Amplitude Control of Micro Resonant Sensors)

  • 박성수
    • 제어로봇시스템학회논문지
    • /
    • 제15권3호
    • /
    • pp.258-264
    • /
    • 2009
  • This paper presents two control algorithms for the frequency and amplitude of the resonator of a micro sensor. One algorithm excites the resonator at its a priori unknown resonant frequency, and the other algorithm alters the resonator dynamics to place the resonant frequency at a fixed frequency, chosen by the designer. Both algorithms maintain a specified amplitude of oscillations. The control system behavior is analyzed using an averaging method, and a quantitative criterion is provided for the selecting the control gain to achieve stability. Tracking and estimation accuracy of the natural frequency under the presence of measurement noise is also analyzed. The proposed control algorithms are applied to the MEMS dual-mass gyroscope without mechanical connecting beam between two proof-masses. Simulation results show the effectiveness of the proposed control algorithms which guarantee the proof-masses of the gyroscope to move in opposite directions with the same resonant frequency and oscillation amplitude.

주파수 영역에서의 사전 부호화를 이용한 STF-OFDM 전송 기법 (STF-OFDM Transmission Scheme via Preceding in Frequency Domain)

  • 박상순;김한경;백흥기
    • 한국통신학회논문지
    • /
    • 제29권7C호
    • /
    • pp.954-961
    • /
    • 2004
  • 본 논문에서는 다중 경로 페이딩 환경에서 고속 데이터 전송에 적합한 STF(Space-Time-Frequency) coded OFDM(Orthogonal Frequency Division Multiplexing) 전송 기법을 제안한다. 본 논문에서 제시하는 STF-OFDM 전송 기법은 적은 연산량으로 주파수 다이버시티 이득을 얻을 수 있는 간단한 전송 기법이다. 주파수 영역에서의 사전부호화를 통해 주파수 다이버시티 이득을 획득하여 기존의 ST-OFDM 전송 기법의 성능을 향상시킬 수 있다. 본 논문에서 제시하는 사전 부호화는 적은 연산량으로 부호화와 복호화가 가능한 간단한 사전 부호화 기법이다.

Accuracy of Free Space Path Loss and Matched Filter Gain Approximated by Using Passband Rectangular Pulse for Ultra Wideband Radio Systems

  • Supanakoon, Pichaya;Tanchotikul, Suchada;Tangtisanon, Prakit;Promwong, Sathaporn;Takada, Jun-Ichi
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.223-226
    • /
    • 2004
  • This paper analyzes the accuracy of free space path loss and matched filter gain approximated by using a passband rectangular pulse for ultra wideband (UWB) radio systems. The example causal signal, a modulated Gaussian pulse with the same center frequency and frequency bandwidth of the passband rectangular pulse, is used to consider the accuracy. The path loss and matched filter gain of the modulated Gaussian pulse are simulated for the reference results. The UWB free space path loss is shown and is compared with that obtained from simulation and Friis' transmission formula. The UWB matched filter gain is shown and compared with simulation results. From the results, we can see that the UWB path loss formula is more accurate than the Friis' transmission formula. The results from the UWB free space path loss and matched filter gain formulas agree with the simulation. Then, these free space path loss and matched filter gain formulas approximated by using a passband rectangular pulse are appropriate for UWB system.

  • PDF

LabVIEW 기반 6축 수직다관절 로봇의 게인스케쥴링 구현 연구 (Gain Scheduling in a 6-Axis Articulated Robot Based on LabVIEW)

  • 김만수;정원지;김성빈
    • 한국생산제조학회지
    • /
    • 제23권3호
    • /
    • pp.318-324
    • /
    • 2014
  • Recent years have witnessed a growing demand for a wide variety of high-performance industrial robots. In this paper, for accurate gain tuning of a 6-axis articulated industrial robot with reduced noise, a program routine for a dynamic signal analyzer (DSA) using the frequency response method will be programmed using $LabVIEW^{(R)}$. Then, robot transfer functions can be obtained experimentally using the frequency response method with the DSA program. Data from the robot transfer functions are transformed into Bode plots, based on which an optimal gain tuning will be executed. Gain tuning can enhance the response quality of the output signal for a given input signal during real-time control of the robot. The effectiveness of our proposed technique will be verified by implementation with a (lab-manufactured) 6-axis articulated industrial robot (hereinafter called "RS2") and comparison with the zero position gain tuning, as well as other positions.

1.5V 70dB 100MHz CMOS Class-AB 상보형 연산증폭기의 설계 (A 1.5V 70dB 100MHz CMOS Class-AB Complementary Operational Amplifier)

  • 박광민
    • 한국전기전자재료학회논문지
    • /
    • 제15권9호
    • /
    • pp.743-749
    • /
    • 2002
  • A 1.5V 70㏈ 100MHz CMOS class-AB complementary operational amplifier is presented. For obtaining the high gain and the high unity gain frequency, the input stage of the amplifier is designed with rail-to-rail complementary differential pairs which are symmetrically parallel-connected with the NMOS and the PMOS differential input pairs, and the output stage is designed to the rail-to-rail class-AB output stage including the elementary shunt stage technique. With this design technique for output stage, the load dependence of the overall open loop gain is improved and the push-pull class-AB current control can be implemented in a simple way. The designed operational amplifier operates perfectly on the complementary mode with 180$^{\circ}$ phase conversion for 1.5V supply voltage, and shows the push-pull class-AB operation. In addition, the amplifier shows the DC open loop gain of 70.4 ㏈ and the unity gain frequency of 102 MHz for $C_{L=10㎊∥}$ $R_{L=1㏁}$ Parallel loads. When the resistive load $R_{L}$ is varied from 1 ㏁ to 1 ㏀, the DC open loop gain of the amplifier decreases by only 2.2 ㏈.a$, the DC open loop gain of the amplifier decreases by only 2.2 dB.

The Optimal Compensator for AT Forward Multi Resonant Converter

  • Oh Yong-Seung;Kim Hee-Jun;Kim Chang-Sun
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.242-246
    • /
    • 2001
  • The alternated forward multi resonant converter (AT forward MRC) is studied on the transient response and the measured loop gain for stability. The compensator is composed of the error amplifier with 3 poles and 2 zeros. This is optimized through the experiment with HP4194A network analyzer. We are initiated by the thinking of how to make the stabilization from the experimental results of loop gain curves. The loop gain, low frequency gain and gain margin are more improved through the experimental considerations. Also, the transient response is more enhanced effectively.

  • PDF