• Wind and Structures
• /
• 제5권6호
• /
• pp.479-492
• /
• 2002

A finite element aerodynamic model that can be used to analyse flutter instability of long span bridges in the time domain is presented. This approach adopts a simplified quasi-steady formulation of the wind forces neglecting the vortex shedding effects. The governing equations used are effective only for reduced velocities $V^*$ sufficiently great: this is generally acceptable for long-span suspension bridges and, then, the dependence of the wind forces expressions of the flutter derivatives can be neglected. The procedure describes the mechanical response in an accurate way, taking into account the non-linear geometry effects (large displacements and large strains) and considering also the compressed locked coil strands instability. The time-dependence of the inertia force due to fluid structure interaction is not considered. The numerical examples are performed on the three-dimensional finite element model of the Great Belt East Bridge (DK). A mode frequency analysis is carried out to validate the model and the results show good agreement with the experimental measurements of the full bridge aeroelastic model in the wind tunnel tests. Significant parameters affecting bridge response are introduced and accurately investigated.

• 한국항해학회지
• /
• 제23권2호
• /
• pp.61-66
• /
• 1999

It is being more and more difficult to suppress emissions from electronic products using PCB(Printed Circuit Board) to the limit. Therefore, the exact evaluation of the emission from PCB has been more important to reduce the required time and the cost at the design phase of the products, especially on board ship's equipments. This research has evaluated the emission radiated from PCB based on the theoretical approach of SDA(Spectral Domain Analysis), which is available to analyze microwave stripline, coplanar line, patch antenna, etc. According to the theoretical results, it has been clearly shown that the emission radiated from PCB is reduced as the thickness of PCB is thinner, the permittivity of PCB is higher, the length of stripline is shorter, and the frequency is lower.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.935-939
• /
• 2012

3D vibration measurement is achieved using one laser scanning vibrometer(LSV) and Laser scanner(LS) by moving the LSV to three arbitrarily locations from the principle that vibration analysis based on the frequency domain is independent of the vibration signal based on time domain. The proposed system has the same effect as using three sets of LSVs. It has an advantage of reducing equipment costs. Analytical approach of obtaining in-plane and out-of-plane vibration of surface is introduced using geometrical relations between three LSV coordinates and vibration measured at three different locations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1541-1542
• /
• 2008

In this paper, we introduce a live wire power transmission line fault detection system using time-frequency domain reflectometry(TFDR). The TFDR is known that is more precise method than the other conventional ones. However, the TFDR is generally adopted only in fault detection for communication cable, and dead line power transmission line. Therefore, this paper suggests a TFDR system with coupler which separates 220V, 60Hz signal and TFDR reference signal for implementation the live wire fault detection system. This approach is verified by circuit simulation.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.725-733
• /
• 2013

An improved formulation of the MNDIF method is introduced to extract highly accurate natural frequencies of concave plates with arbitrary shape. Originally, the MNDIF method cannot yield accurate natural frequencies for concave plates. It can be applicable to only convex plates. To overcome this weak point, a new approach of dividing a concave plate into two convex domains and applying the MNDIF method to each domain is proposed and the validity and accuracy are shown in verification examples.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.174-181
• /
• 2002

The paper presents an effective analytical method for SSI systems which can have separation or sliding at the soil-structure interface. The method is based on a hybrid approach which combines a linear SSI code KIESSI-2D in frequency domain with a commercial finite element package ANSYS to obtain nonlinear dynamic responses in time domain. The method is applied to a 2-D underground box structure which experiences separation and sliding at the soil-structure interface. Material nonlinearity of the concrete structure is also included in the analysis. Effects of the interface conditions are examined and some critical factors affecting the seismic performance of underground structures are identified.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.248-251
• /
• 1996

In this paper, we presented WT(wavelet transform) domain feedback canceller in hearing aids system. Most transform methods produce blocking effect and this effect degrades the performance of feedback canceller and overall hearing aids system. As a solution we proposed WT based feedback canceller. The performance of this new approach was compared with LOT (lapped orthogonal transform) based method in the frequency domain. As a result, WT based feedback canceller has not shown the blocking effect and improved convergence rate as compared with the LOT based feedback canceller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.167.4-167
• /
• 2001

Accurate mathematical models of spacecraft components are an essential of spacecraft attitude control system design, analysis and simulation. Gyro is one of the most important spacecraft components used for attitude propagation and control. Gyro errors may seriously degrade the accuracy of the calculated spacecraft angular rate and of attitude estimates due to inherent drift and bias errors. In this paper, a detailed mathematical model of gyro containing the relationships for predicting spacecraft angular rate and disturbances is proposed. Stochastic model describing random drift behavior is discussed in frequency domain and time domain. In order to illustrate this approach, we analyze the behavior for Litton´s Space Inertial Reference Uint(SIRU).

• 융합정보논문지
• /
• 제10권7호
• /
• pp.131-137
• /
• 2020

가진 정현파 강제력에 의한 강제 진동의 특성이 연구되었고 또한, 주파수 영역에서 FRF의 수치 분석을 자세히 수행하였다. 이와 관련하여 강제 진동 모델에서 변위, 속도 및 가속도의 응답을 구하였다. 고유 주파수 주변의 실수부와 허수부의 FRF 특성도 각 경우에 따라 구하였다. 시간 영역에서의 강제 진동의 응답분석은 정현파 강제 진동의 특성을 식별할 수 있다. 변위, 속도 및 가속도 등의 응답을 얻기 위해 Runge-Kutta-Gill 방법의 수치해석 기법을 수행하여 강제력 주파수에 따른 응답을 얻었고 이 주파수는 응답에 큰 영향을 미치지 않았다. 또한, FRF는 강제 진동의 고유 특성을 나타내고 있으며 이러한 강제 진동 모델의 각 감쇠 조건에서 이러한 응답분석을 성공적으로 자세하게 얻을 수 있었다. 상이한 질량, 감쇠 및 강성에 대한 수치 분석 후, 정현파 강제력에 의한 강제 진동 응답 특성을 강제력의 진폭 및 주파수를 동시에 고려하여 분석되었다.

• 한국통신학회논문지
• /
• 제33권3A호
• /
• pp.256-268
• /
• 2008

본 논문에서는 다중 경로 레이리 페이딩 시변 채널 환경의 Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO-OFDM) 시스템에서 효율적으로 채널 변화를 추적할 수 있는 채널 추적방식을 제안하였다. 제안된 방식은 시변 채널에 대응할 수 있도록 블라인드 채널 예측기를 설계하였다. 또한 주파수 영역 채널 추정이 Minimum Mean Square Error (MMSE) 시간영역 채널 추정과 결합되어 있으며 이 방식은 매 OFDM 심벌마다 역행렬을 계산할 필요가 없다는 장점이 있다. 컴퓨터 시뮬레이션 결과 제안된 방식은 기존의 Li방식[4] 보다 성능이 우수함을 보였다. 도플러 주파수 100Hz 및 10-4 BER에서 Eb/No이득이 약 2.5 dB 정도 되었다. 도플러 주파수가 200Hz일 때 그 성능의 차이는 더욱 커졌다.