• 한국주조공학회지
• /
• 제29권2호
• /
• pp.78-85
• /
• 2009

Functionally graded microstructure of centrifugal cast Al-Si alloy, especially distribution of primary Si particles according to the changes of melt pouring temperature and rotation frequency was investigated by numerical simulation. Moving velocity of Si particles increased as the melt pouring temperature and rotational frequency of mold increased. Therefore, segregation tendency of primary Si particles toward inner side of cylindrical sample increased as the melt pouring temperature and rotational frequency of mold increased. Rich distribution region of particles was located at 0.9, 0.7, 0.4 mm from inner surface of cylindrical sample under the centrifugal cast condition of $750^{\circ}C$ melt pouring temperature and 1500, 2000 and 2500 rpm mold rotational frequencies, respectively, by numerical simulation.

• 한국환경과학회지
• /
• 제20권3호
• /
• pp.321-327
• /
• 2011

Bootstrap methods is the computer-based resampling method that estimates the standard errors and confidence intervals of summary statistics using the plug-in principle for assessing the accuracy or uncertainty of statistical estimates, and the BCa method among the Bootstrap methods is known much superior to other Bootstrap methods in respect of the standards of statistical validation. Therefore this study suggests the method of the representation and treatment of uncertainty in flood risk assessment and water resources planning from the construction and application of rainfall frequency analysis model considersing the uncertainty based on the nonparametric BCa method among the Bootstrap methods for the assessement of the estimation of probability rainfall and the effect of uncertainty considering the uncertainty of the parameter estimation of probability in the rainfall frequency analysis that is the most fundamental in flood risk assessement and water resources planning.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2114-2124
• /
• 2004

In this paper, a structural damage identification method (SDIM) is developed for cylindrical shells and the numerically simulated damage identification tests are conducted to study the feasibility of the proposed SDIM. The SDIM is derived from the frequency response function solved from the structural dynamic equations of damaged cylindrical shells. A damage distribution function is used to represent the distribution and magnitudes of the local damages within a cylindrical shell. In contrast with most existing modal parameters-based SDIMs which require the modal parameters measured in both intact and damaged states, the present SDIM requires only the FRF-data measured in the damaged state. By virtue of utilizing FRF-data, one is able to make the inverse problem of damage identification well-posed by choosing as many sets of excitation frequency and FRF measurement point as needed to obtain a sufficient number of equations.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.587-593
• /
• 1996

Vibration analysis is one of the most powerful tools available for the detection and isolation of incipient faults in mechanical systems. The methods of vibration analysis in use today and under continuous study are broad band vibration monitoring, time domain analysis, and frequency domain analysis. In recent years, great interest has been generated concerning the use of time-frequency representation and its application for a machinery diagnostics and condition monitoring system. The objective of the research described in this paper was to develop a new diagnostic tool for the rotating machinery. This paper introduces a new time-frequency representation, Directional Wigner-Ville Distribution, which analyses the time- frequency structure of the rotating machinery vibration.

• 말소리와 음성과학
• /
• 제15권3호
• /
• pp.17-25
• /
• 2023

이 논문은 국립국어원에서 배포한 한국인 대화 음성 말뭉치에서 화자의 성대의 진동을 나타내는 fundamental frequency(f0)값을 측정해서 한국인이 일상 대화를 할 때 f0값의 기초적인 통계자료를 살펴보고, 나이와 f0값의 분포는 어떤 관계를 보이는지를 조사했다. 연구자료 수집과 분석은 Praat과 R을 이용했고, 개인별 억양구마다 상자도를 구하고 사분위값을 활용하여 극단값을 제거하는 방법으로 최종 f0값 자료를 구했다. 그 결과 전체 한국인들의 f0값의 평균값은 185 Hz이고 중앙값은 187 Hz로 나왔다. 자료의 분포모양을 나타내는 왜도는 0.11의 정적분포를 보였고, 첨도는 -0.09로 정상분포에 거의 가까운 모양을 보였다. 일상대화의 피치값의 변화범위로는 238 Hz로 나타났다. 남녀 간의 f0값의 차이는 남성의 중앙값 114 Hz의 거의 두 배에 해당하는 199 Hz가 여성의 중앙값으로 나타났고 t검증결과 유의미한 차이를 보였다. 분포모양을 나타내는 왜도는 남성이 1.24이었고, 여성은 그것의 반에 해당하는 0.58이었다. 첨도는 남녀집단 각각 5.21과 3.88로 나타나 남성의 값이 34% 정도 더 뾰족한 모양을 보였다. 연령대별로는 남녀집단을 합하여 볼 때, 나이가 들수록 f0값이 서서히 내려가는 경향을 보였다. 연령대별 f0중앙값과 나이 간의 회귀분석을 실행한 결과 기울기가 남성집단에서는 0.15, 여성집단에서는 -0.586으로 서로 반대되는 경향을 기록했다. 결론적으로, 대규모 참여자가 녹음한 대화 음성에서 한국인의 집단별 연령별 다양한 f0분포를 규명할 수 있지만, 나이와 f0관계는 더 정밀한 자료수집이 필요함을 알 수 있었다.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.46-52
• /
• 2013

The current distribution passing through grounding electrode is required for calculating an impedance of grounding electrode using the electromagnetic field model. In this paper the numerical calculation for currents passing through a grounding electrode as a function of frequency was given. The proposed approach is based on the wire antenna model(AM) in the frequency domain. The Pocklington's equation driven from the wire antenna theory was numerically calculated by the Galerkin's method. The triangle function was applied to both the basis function and the weighting function. The current distribution of a horizontal ground electrode was simulated in MATLAB. Also these results were compared with the data obtained from the CDEGS HIFREQ calculation.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.51-58
• /
• 2001

This paper gives a type and high-frequency waves analysis of in-rush current cab be flowed into distribution automatic machine to be installed in distribution line in order to use minimizing operation error of failure indicator to have been issue recent with obtaining high-frequency component that can be different from current. The in-rush and fault current data studied in this paper is to be surveyed actually in USA distribution system substation line of Bryan Power Company near Texas A. M University, to be occurred high impedance fault.

• 생약학회지
• /
• 제3권2호
• /
• pp.57-64
• /
• 1972

For the purpose of scientific evaluation of oriental medicine, statistical analyses of oriental medicine formularies have been attempted. Four hundred and sixty seven prescriptions in 'Bang-Yak-Hap-Pyon', the most popular formulary of oriental medicine in Korea, were analysed to obtain statistical characteristics on the prescription frequency and origin distribution of two hundred and ninety three herb drugs.

• Journal of Plant Biology
• /
• 제11권2호
• /
• pp.31-35
• /
• 1968

Further study on the frequency and geographical distribution of rye with accessory chromosomes in Korea was carried out in 1996. All of the 15 populations of rye investigated were found to have accessory chromosomes and the frequencies of accessories were ranged from 15 to 54%. The study from 1963 to 1966 shows that the frequency of accessory ranging from 30 to 40% is predominant.