• Structural Engineering and Mechanics
• /
• v.72 no.2
• /
• pp.229-244
• /
• 2019

Weak form integral equations are developed to investigate the flapwise bending vibration of the rotating beams. Rayleigh and Eringen nonlocal elasticity theories are used to investigate the rotatory inertia and Size-dependency effects on the flapwise bending vibration of the rotating cantilever beams, respectively. Through repetitive integrations, the governing partial differential equations are converted into weak form integral equations. The novelty of the presented approach is the approximation of the mode shape function by a power series which converts the equations into solvable one. Substitution of the power series into weak form integral equations results in a system of linear algebraic equations. The natural frequencies are determined by calculation of the non-trivial solution for resulting system of equations. Accuracy of the proposed method is verified through several numerical examples, in which the influence of the geometry properties, rotatory inertia, rotational speed, taper ratio and size-dependency are investigated on the natural frequencies of the rotating beam. Application of the weak form integral equations has made the solution simpler and shorter in the mathematical process. Presented relations can be used to obtain a close-form solution for quick calculation of the first five natural frequencies of the beams with flapwise vibration and non-local effects. The analysis results are compared with those obtained from other available published references.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2002.02a
• /
• pp.63-66
• /
• 2002

A free piston and free displacer (FPFD) Stilting cryocooler for the cooling infrared and cryo-sensor is currently under development at Korea Institute of Machinery & Materials. In this study, the dynamic characteristics of the displacer in the expansion space of the Stirling cooler was investigated by experiment. The experimental results show that the Stirling cryocooler has maximum cooling capacity at the certain relation between operating frequency and natural frequency of the displacer and the operating frequency of the Stirling crycooler should be determined by natural frequency of the linear compressor and displacer.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.55-62
• /
• 2008

Bandpass sampling (BPS) techniques for the direct down-conversion of RF bandpass signals have become an essential technique for software defined radio (SDR), due to their advantage of minimizing the radio frequency (RF) front-end hardware dependency. This paper proposes an algorithm for finding the minimum BPS frequency for simultaneously down-converting multiple RF signals through full permutation over all the valid sampling ranges found for the multiple RF signals. We also present a scheme for reducing the computational complexity resulting from the large scale of the purmutation calculation involved in searching for the minimum BPS frequency. In addition, we investigate the BPS frequency allowing for the guard-band between adajacent down-converted signals, which help lessen the severe requirements in practical implementations. The performance of the proposed method is compared with those of other pre-reported methods to prove its effectiveness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.900-905
• /
• 2008

I perform bit error rate(BER) analysis of orthogonal frequency division multiplexing(OFDM) systems impaired by both direct current(DC) offset and carrier frequency offset. By analyzing the BER performance for real OFDM systems employing 16-quadrature amplitude modulation(QAM) and pilot symbol estimation, the dependency of BER on the DC offset and carrier frequency offset is quantified and compared to ideal performance. Results show that the magnitude of frequency offset and DC offset are required to be less than 0.01 and 0.007, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1248-1256
• /
• 2008

In this paper, basic characteristics of transmission line employing PPGM (periodically perforated ground metal) were investigated using theoretical and experimental analysis.According to the results, unlike the conventional PBG (photonic band gap) structures, the characteristic impedance of the transmission line employing PPGM structure showed a real value, which exhibited a very small dependency on frequency. The transmission line employing PPGM structure showed a loss (per quarter wave length) higher by $0.1{\sim}0.2\;dB$ than the conventional microstrip line. According to the investigation of the dependency of RF characteristic on ground condition, the RF characteristic of the transmission line employing PPGM structure was hardly affected by the ground condition in the frequency lower than Ku band, but fairly affected in the frequency higher than Ku band, which indicated that coplanar waveguide employing PPGM structure was optimal for RF characteristic and reduction of size. Considering above results, impedance transformer was developed using coplanar waveguide with PPGM structure for the first time, and good RF characteristics were observed from the impedance transformer. In case that {\lambda}/4$ impedance transformer with a center frequency of 9 GHz was fabricated for a impedance transformation from 20 to10 {\Omega}$, the line width and length were 20 and $500\;{\mu}m$, respectively, and its size was only 0.64 % of the impedance transformer fabricated with conventional microstrip lines. Above results indicate that the transmission line employing PPGM is a promising candidate for a development of matching and passive elements on MMIC.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.7
• /
• pp.2196-2203
• /
• 2000

As processor's operational frequency increases and processors execute multiple instructions per cycle, the processor performance becomes more dependent on the load operand referencing latency and the data dependency. To reduce the operand fetch latency and to increase ILP by breaking the data dependency, we propose a value-address hybrid predictor using a reasonable size prediction buffer and analyse the performance improvement by the proposed predictor. Through the extensive simulation of 5 benchmark programs, the proposed hybrid prediction scheme accurately predicts 62.72% of all loads which are 12.64% higher than the value prediction scheme and show its cost-effectiveness compared to the address predition scheme. In addition, we analyse the performance improvement achieved by the stride management and the history of previous predictions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.1
• /
• pp.9-13
• /
• 1982

The purpose of this experiment is to evaluate the noise dependency on the gate dimensions of the P-ch MOSFET which is fabricated of p+ sourse, drain, and gate electrode doped with PH$_3$ gas in type-N Si sudstrate. Experimental results indicate that: for the constant gate area and reletively thick films, noise level tends to decrease for the W/L ratio over unity, which generally conforms with theoretical observations, but its variation with the change in the thickness of film is less than the theoretically predicted for the W/L ratio below unity.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.4
• /
• pp.396-403
• /
• 2004

The dielectric properties of Y-ray irradiated and thermally aged polyetheretherketone (PEEK) have been investigated. Results of the temperature dependency of dielectric properties indicated that the glass transition temperature of aged PEEK increased as radiative and thermal ageing. The frequency dependency of dielectric properties implied that the magnitude of radiation and thermal induced dipoles, ions increased as radiative and thermal ageing. The values of relaxation intensity calculated using Cole-Cole's circular arc can be useful for evaluation of degradation level of PEEK.

• Korean Journal of Adult Nursing
• /
• v.17 no.2
• /
• pp.219-229
• /
• 2005

Purpose: The purpose of this study was to evaluate the effectiveness of 8 weeks smoking cessation program(SCP) developed by researchers. Method: One group pretest-posttest design was used in this study. The subjects were 88 male university students who consented to participate in the 8 weeks SCP. The SCP in this study consisted of a stop-smoking class, e-mail, SMS(short message service), cellular phone, internet cafe, displayed panel, and patch or acupuncture for quitting smoking. Korean version of questionnaire for nicotine dependency by Ahn et al.(2002), the smoking self-efficacy scale translated by Choi(1999) and subjects' opinion about the SCP were measured. The data were analyzed by using frequency, Chi-Square test, paired t-test and repeated measures ANOVA with SPSS WIN 10.1 Program. Results: 1) The rate of quitting smoking was 31.8% after 8 weeks SCP. 2) There was no significant decrease in the nicotine dependency score among smoking subjects after SCP. 3) There was a significant increase in self-efficacy after SCP. The mean score of self -efficacy in the quitting smoking group increased significantly, but did not significantly change in the smoking group. 4) The stop-smoking class was the most helpful among contents of the SCP. Contents of the SCP except for internet cafe were useful for quitting smoking in this study. Conclusion: The above results indicated that the 8 weeks SCP would be a helpful intervention to quit smoking for male university students.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.110-116
• /
• 2022

Human failure event (HFE) dependency analysis is a part of human reliability analysis (HRA). For efficient HFE dependency analysis, a maximum number of minimal cut sets (MCSs) that have HFE combinations are generated from the fault trees for the probabilistic safety assessment (PSA) of nuclear power plants (NPPs). After collecting potential HFE combinations, dependency levels of subsequent HFEs on the preceding HFEs in each MCS are analyzed and assigned as conditional probabilities. Then, HFE recovery is performed to reflect these conditional probabilities in MCSs by modifying MCSs. Inappropriate HFE dependency analysis and HFE recovery might lead to an inaccurate core damage frequency (CDF). Using the above process, HFE recovery is performed on MCSs that are generated with a non-zero truncation limit, where many MCSs that have HFE combinations are truncated. As a result, the resultant CDF might be underestimated. In this paper, a new method is suggested to incorporate HFE recovery into the MCS generation stage. Compared to the current approach with a separate HFE recovery after MCS generation, this new method can (1) reduce the total time and burden for MCS generation and HFE recovery, (2) prevent the truncation of MCSs that have dependent HFEs, and (3) avoid CDF underestimation. This new method is a simple but very effective means of performing MCS generation and HFE recovery simultaneously and improving CDF accuracy. The effectiveness and strength of the new method are clearly demonstrated and discussed with fault trees and HFE combinations that have joint probabilities.