• 전자공학회논문지D
• /
• 제34D권5호
• /
• pp.52-60
• /
• 1997

Photonic switching systems with throughput above Tbit/s are reuried to transport vast amounts of information for the coming B-ISDN. In this paper, we proposed a new time-division hybrid WDM photonic swithc architecture, the proposed basic switch module has simple configuratin consisted of frequency routers for wavelength division and cell coders and star couplers for time division. Through the comparison with other sysems in field of switching capacity, hardware complexity and cost effect of implemetnation, we proved that the proposed system is suitable for large-capacity photonic switching system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권1호
• /
• pp.23-33
• /
• 2002

A hysteresis control is widely used to control output current of inverter. A hysteresis bandwidth is affected by system parameters such as source voltage, device on/off time, load inductance and resistance. The frequency limiter is used to protect switching devices overload. In the conventional hysteresis controller, a lock-out circuit with D-latch and timer is used to device protection circuit. But switching delay time and harmonic components are appeared in output current. In this paper the performance of lock-out circuit is tested, and new circuit for switching device fault protection is proposed ad it's performance is simulated.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.520-526
• /
• 2011

This paper presents a balanced soft-chopping circuit and a modified PI controller for a high speed 4/2 Switched Reluctance Motor (SRM) with a 16 pulse per revolution encoder. The proposed balanced soft-chopping circuit can supply double the switching frequency in the fixed switching frequency of power devices to reduce current ripple. The modified PI controller uses maximum voltage, back-emf voltage and PI control modes to overcome the over-shoot current due to the time delay effect of current sensing. The maximum voltage mode can supply a fast excitation current with consideration of the hardware time delay. Then the back-emf voltage mode can suppress the current over-shoot with consideration of the feedback signal delay. Finally, the PI control mode can adjust the phase current to a desired value with a fast switching frequency due to the proposed balanced soft-chopping technology.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.178-180
• /
• 1994

In recent days, the inverter is widely used at the industrial applications. In the range lower than 100[kW], IGBT(Insulated Gate Bipolar Transistor) is most widely used as the switching device. In that case of IGBT, the rising time and the filling time are very short(about $200[ns]{\sim}300[ns]$). Especially for motor control applications, the switching frequency is required to be increased for better dynamic performance of the drive. However, the higher switching frequency leads to the unexpected problem occurs such as voltage spike due to stray inductance in the bus at switching instant. In this paper, a new methodology for reducing the stray inductance existing in the bus that induces the voltage spike will be presented.

• Industrial Engineering and Management Systems
• /
• 제11권1호
• /
• pp.48-53
• /
• 2012

Due to the customer needs of reducing cost and delivery date shorting, prompt change in the production plan became more important. In the multi period system (For instance, production line.) where target processing time exists, production, idle and delay risks occur repeatedly for multiple periods. In such situations, delay of one process may influence the delivery date of an entire process. In this paper, we discuss the minimum expected cost of the case mentioned above, where the risk depends on the previous situation and occurs repeatedly for multiple periods. This paper considers the optimal switching frequency to minimize the total expected cost of the production process. In this paper, first, the optimal switching frequency model is proposed. Next, the mathematic formulation of the total expectation is presented. Finally, the policy of optimal switching frequency is investigated by numerical experiments.

• 한국의류학회지
• /
• 제25권8호
• /
• pp.1512-1523
• /
• 2001

The purposes of this study were to examine the effect of switching barrier perception on store loyalty in apparel product purchasing to classify the factors of switching barrier perception, and additionally ot identify differences of store loyalty and switching barrier perception according to demographic characteristics. The questionnaire was administered to 300 women shopped in a department store in Gwang-ju city during February 10-23, 2001. Data collected from 261 women were analyzed by using frequency, factor analysis, ANOVA, Duncan-test, regression analysis by SPSS for windows PC program. The results were as follows; 1. The consumer’s perceived switching barrier was composed of three factors; economic psychological, time factor. 2. There was significant difference in store loyalty according to consumer’s age, occupation, education level. and income. 3. There was significant differences in economic. time switching barrier perception according to consumers’age, occupation education level, and income. There was significant difference in psychological switching barrier perception according to consumers’ occupation education level, and income. 4. The swiching barrier perception significantly infulenced on the store loyalty.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1168-1170
• /
• 2000

A half bridge time sharing type high frequency resonant inverter to give VVVF function in the inverter used as power source of induction heating at high frequency is presented in this paper, this paper also realize the output control of independence irrespective of the switching frequency using Phase-Shift. The analysis of the proposed circuit is generally described by using the normalized parameters. Also, the principle of basic operation and the its characteristics are estimated by the parameters, such as switching frequency, the variation of phase angle(${\varphi}$) of Phase-Shift. It is certain that the proposed circuit will be used and expanded in the high frequency power supplies like induction heating systems.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권12호
• /
• pp.616-623
• /
• 2003

Conventional P/PI speed controller of today's servo drives should be manually tuned the controller switching set-point by trial-and-errors, which may translate the drive system down-time and loss of productivity. The adjustable drive performance is heavily dependent on the quality of the expert knowledge and becomes inadequate in applications where the operating conditions change in a wide range, i.e., tracking command, acceleration/deceleration time, and load disturbances. In this paper, the demands on simple controls/setup are discussed for industry servo drives. Analyzing the frequency content of motor torque command, P/PI control mode switching is automatically performed with some prior knowledge of the mechanical dynamics. The dynamic performance of the proposed scheme assures a desired tracking response curve with minimal oscillation and settling time over the whole operating conditions. For comprehensive comparison of traditional P/PI control scheme, extensive test is carried out on actual servo system.

• 한국전자파학회논문지
• /
• 제23권5호
• /
• pp.640-645
• /
• 2012

하이브리드 전기 차량 내에 존재하는 DC-DC 컨버터 또는 DC-AC 인버터에 의해 스위칭 잡음이 발생된다. 이 스위칭 잡음은 컨버터 또는 인버터의 스위칭 회로 내에 존재하는 전력 다이오드의 역 회복 동작에 의해 발생된다. 다이오드의 반전 시간과 역 회복 시간이 역 회복 구간의 모양을 결정한다. 본 논문은 스위칭 잡음의 주파수 스펙트럼을 다이오드 역 회복 구간의 모양을 통해 예측하고, 측정 결과와 비교하여 주요 주파수 구간이 다이오드의 반전 시간과 직접적인 연관이 있다는 것을 확인하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.27-30
• /
• 2003

This paper describes two novel current fed high frequency resonant inverter can be used as the power supp]y for wax-sealing. This two topology can be obtained higher output frequency than switching frequency by composing modified unit inverter based on conventional half-bridge serial resonant inverter in parallel with input power source. also, By using time-sharing gate control method, this proposed inverter can not only realize the output control of dependence irrespective of the switching frequency using phase-shift but also reduce switching loss because it has ZVS function. Simulation results through the Pspice have demonstrated the feasibility of the proposed inverter. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, DC-DC converter etc.