• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.339-342
• /
• 2008

In this paper, the lessons and learns are introduced from the result of the trial project which is the first CBTC(Communication Based Train Control System) at Korail Bundang Line. This project has started end of 2002 and finished recently by Samsung SDS. The main purpose of this project was that new technology was seek for next generation of railway signal control system adapted in Korea. In 2002, there was no any revenue service system using Radio Frequency CBTC in the world at that time. Just a few trial project was on going in USA and EU. In well developed cities, the metro system have been built and old enough therefore they have to be considering re-signalling their existing system with advanced system for increasing availabilities of line usage and safety. This Bundang Line Trial Project was the first Korean CBTC project for above reasons. Most sub systems have been developed using local technology such as Electronics Controlled Interlocking System and Track Circuit Systems etc. Specially, in this project the RF-Communication devices are developed by local technology using DSSS(Direct Sequency Spread Spectrum) instead of FHSS(Frequency Hopping Spread Spectrum). This project has lasted for more than five years originally planned for three years because it was only accessible only night time in the main line from Ori to Suseo about 20km long. Each night only 2 and half hours are available to use the main line. Now the trial project has been done successfully with meet the customer's requirement, therefore the upgrade the mainline of Bundang line and another extension area up to Wangsipli to make revenue service using this new technology. This paper shows this result of the trial project and the strategy of upgrade and extension project as well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.901-911
• /
• 1994

The error performance of M-ary differential phase shift keying (MDPSK) through m-distribution fading channel in hybrid direct sequence/slow frequency hopped spread spectrum multiple access (DS/SFH-SSMA) systems has been evaluated, and also the error probability has been evaluate when adopting diversity technique and coding technique. From the results, we know that the error performance more deteriorates as depth of fading becomes deeper. In Rayleigh fading environment (m=1), increasing of the number of frequency hopping (q) reduces the effect of multiple access interference, because it decreases the probability a hit. When q is much larger than the number of user (K), the probability of error in high E/N region is dominated by the multipath interference while the multiple access interference is negligible. In lower E/N region, the probability of error is independent of q because the effect of gaussian noise becomes dominat.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.543-546
• /
• 2005

In this paper, it was estimated the BER performance of the individual system type by applying the SFH type and the FFH type to the FH MC-DS CDMA system that combined the strong points of MC DS/CDMA and that of Frequency Hopping under the Nakagami fading channel with Multi-tone Jamming. An increase in the number of hoppings means that it can improve the BER performance by reducing the receiving burden of the FH MC DS/CDMA by achieving a frequency diversity effect. Therefore, I verified that the performances of the FH MC DS/CDMA system could be improved by increasing the number of hoppings.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1629-1637
• /
• 2003

In this paper, we analyzed the performance of a hybird DS/SFH(Direct­Sequency­Slow Frequency­Hopping) Spread Spectrum system with BFSK modulation over Nakagami­m fading channel with multitone jamming. The performance of the system was improved when a frequency bowing rate increased. In case that process gain of hybrid DS/SFH Spread Spectrum system to be fixed, the hybrid DS/SFH Spread Spectrum takes the low bit error probability than a DS Spread Spectrum system. Also, when the fading index m increases, the fading effect decrease, when the JSR(jamming to signal power ratio) increases ,the performance of a hybrid DS/SFH Spread Spectrum system improved than DS Spread Spectrum system. The result, we have been proved that performance of a hybrid DS/SFH Spread Spectrum was superior to DS Spend Spectrum system over Nakagami­m fading with tome jamming.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.241-246
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to support marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.638-645
• /
• 2020

The mast is the highest structure in a naval ship, and various communication and radar antennas are installed to achieve long-range communications and line of sight. The U.S. and European navy currently are adopting integrated mast to their new ships, as it can reduce the Radar Cross Section(RCS) of the new ships and thus improve survivability of the ship. In this paper, when other navies adopt integrated masts on new ships, types of antennas, according to the cases that the antennas are integrated on the integrated mast or not, are analyzed. Also the types of antennas and transmission techniques for the radio communication equipments of the Korean Navy are analyzed in various frequency bands. For adopting an integrated mast on Korean new ships, the effects of the ship RCS according to the types of antennas, the possibility of integration the antennas and the integrated mast and considerations were presented.

• Journal of the Korean Chemical Society
• /
• v.53 no.1
• /
• pp.42-50
• /
• 2009

The dielectric-spectroscopic and ac conductivity studies firstly carried out on layered manganese doped Sodium Lithium Trititanates ($Na_{1.9}Li_{0.1}Ti_3O_7$). The dependence of loss tangent (Tan$\delta$), relative permittivity ($\varepsilon_r$) and ac conductivity ($\sigma_{ac}$) in temperature range 373-723K and frequency range 100Hz-1MHz studied on doped derivatives. Various conduction mechanisms are involved during temperature range of study like electronic hopping conduction in lowest temperature region, for MSLT-1 and MSLT-2. The hindered interlayer ionic conduction exists with electronic hopping conduction for MSLT-3. The associated interlayer ionic conduction exists in mid temperature region for all doped derivatives. In highest temperature region modified interlayer ionic conduction along with the polaronic conduction, exist for MSLT-1, MSLT-2, and only modified interlayer ionic conduction for MSLT-3. The loss tangent (Tan$\delta$) in manganese-doped derivatives of layered $Na_{1.9}Li_{0.1}Ti_3O_7$ ceramic may be due to contribution of electric conduction, dipole orientation, and space charge polarization. The corresponding increase in the values of relative permittivity may be due to increase in number of dipoles in the interlayer space while the corresponding decrease in the values of relative permittivity may be due to the increase in the leakage current due to the higher doping.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2178-2187
• /
• 2015

Bluetooth Low Energy (Bluetooth LE) is a representative break-through communication technology for wireless personal area networks on nowaday. In this environment, most of significant performance should be aiming to energy efficiency due to the policy for manufacturing light-weighted communication devices derived from requirement of world IoT market, and many researches have been developed to satisfy this requirement. While Bluetooth LE has been leading the low power communication technology required from the current market by employing duty cycle and frequency hopping approaches, it couldn't address the problem of reliability on broadcast transmissions. The main goal of this paper is aiming to addressing this problem by suggesting a new method. Furthermore analytic evaluations would also be proceeded to find objective results in the view point of broadcast transmission efficiency from Master device.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.435-438
• /
• 2003

The MS card data transfer system using blue-tooth protocol ran communicate the MS card data wirelessly and does not take an extra communication expense which is a weakness point of existing wireless communication system. This Blue-tooth system, which has excellent security and no extra communication expense, can efficiently communicate data of the place ,where can be solved with small scale wireless network, such as the theme-park or gasoline-station. Existing wireless communication system compose network using wireless-LAN protocol which has extra communication expense, or with RF protocol which has poor security. But this system suitable for LAN because it has not extra communication expense and it has excellent security cause frequency-hopping of Blue-tooth protocol. The MS card data transfer system using blue-tooth protocol has low power, high performance RISC processor and large scale 16-gray graphic LCD which is suitable for portable unit. The MS card data transfer system can efficiently control depot for a long time because it has low power, excellent security and no extra communication expense.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.1-9
• /
• 2015

Recently, cognitive radio technology has been spotlighted for the efficient use of limited frequency technology. The most important part of CR is to protect the incumbent user's communications. Therefore, CR user should be sensing the currently using channel and another hopping channel for sudden appearance of the Incumbent User. In this paper, we propose the cooperative channel sensing to protect the IU considering each CR user's remained power and sensing-zone, sense the spectrum bands in a fairly distributed manner and share the results among the users within respective sensing zone. Sensing scheme including inband sensing and outband sensing is utilized. The inband sensing is in charge of current using channel scanning while the outband sensing mainly cares about other channels. The performance results by computer simulations show that our sensing scheduling scheme reduces the number of sensing nodes and saves energy need to channel sensing.