• Proceedings of the Korea Contents Association Conference
• /
• 2006.11a
• /
• pp.856-859
• /
• 2006

Patient's position who muscle ache curer for hospital undergoes person entrance and treatment that take advantage of biological, physical force of low frequency and it is equipment that treat body muscle ache, but use equipment when use patient into compensation in hospital specially, that consider everybody is important first of all. This research question investigation with market survey of old product enforce because preference degree reflected officer a result and apply opinion tuned with product development connection engineers on DESIGN direction via typical product design development process close. This curer development research analyzed data involved directly taking advantage of FGI techniques with literature investigation collection. Investigation examined laying stress on muscle ache curer for hospital and a nurse than a doctor answered on question and purchase selection criterion or price portion to user focus. Direct market survey research that see item indicated by competition four provision shortcomings consequently in NEW MODEL development hereafter supplement and expectation. by contributing greatly in M/S security strategy hereafter because design development consisted for side that improve.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.1
• /
• pp.7-13
• /
• 2006

Linear compressors with a free piston driven by a linear motor are widely attention in the cooling apparatus such as refrigerator due to the high efficiency The stroke of piston in the linear compressor driven by LPMSM (Linear Permanent-Magnet Synchronous Motor) can be obtained from Integrating the input voltage and current of LPMSM, but it may be diverged due to dc components in the voltage and current. The strategy to prevent the divergence of stroke using both the high-pass filter and do offset compensation was suggested. The equations for the magnitude and phase of the stroke and also dc offset including the stroke are derived as a function of the cut-off frequency of HPF. The accurate stroke of a piston can be calculated by compensating for dc offset. The performance of the newly developed stroke calculation scheme has been verified by experimentally on a linear compressor drive system, where the control was implemented by a 16-bit DSP.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1205-1214
• /
• 2013

Recently spaceborne SAR systems are increasing image resolution and frequency. As a high quality image resolution, the wider bandwidth is required and a wideband signal generator with RF component is very complicated and RF impairments of device is increased. Therefore, it is very important to improve performance by reducing these errors. In this study, the transmission signal of the wideband signal generator is applied to the phase noise, IQ imbalance, ripple gain, nonlinear model of high power amplifier. And we define possible structures of wideband signal generator and measure the PSLR and ISLR for the performance assesment. Also, we extract error of the amplitude and phase from the waveform and use a quadratic polynomial curve fitting and examine the performance change due to nonlinear device. Finally, we apply a high power amplifier predistortion method for non-linear error compensation. And we confirm that distortion in the output of the amplifier by intermodulation component is decreased by 15 dB.

• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.329-334
• /
• 2004

Functional residual capacity (FRC) is an important diagnostic parameter measured using $N_{2}$ analyzer. Since $N_{2}$ analyzer is expensive as well as cumbersome for use of noisy vacuum pump, the FRC measurement becomes possible only in large well-equipped hospitals. The present study introduced a new $TN_{2}$ wash-out technique to measure FRC by $O_{2}/CO_{2}$ analysis, which is relatively cheaper and much simpler to apply. Slower $O_{2}$ response was compensated for high frequency to be coincided with $CO_{2}$ response, thereby enabled indirect, but accurate $N_{2}$ concentration measurement. FRC was estimated by continuous integration of expired $N_{2}$ volume obtained with air flow signal. Experiment with 3 L syringe, a standard calibration device recommended by the American Thoracic Society, demonstrated less than 1% error at 0, 1, and 2 L. Correlation coefficient was almost ideal, guaranteeing linear estimation of FRC. The present technique is inexpensive and simple to apply, thus should he of great convenience.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.77-83
• /
• 2012

In this paper, a low-complexity embedded compression (EC) Codec algorithm for the wavelet video coder is applied to reduce excessive external memory requirements. The EC algorithm is used to achieve a fixed compression ratio of 50 % under the near-lossless-compression constraint. The EC technique can reduce the 50 % memory requirement for intermediate low-frequency coefficients during multiple discrete wavelet transform stages compared with direct implementation of the wavelet video encoder of this paper. Furthermore, the EC scheme based on a forward adaptive quantization and fixed length coding can save bandwidth and size of buffer between DWT and SPIHT to 50 %. Simulation results show that our EC algorithm present only PSNR degradation of 0.179 and 0.162 dB in average when the target bit-rate of the video coder are 1 and 0.5 bpp, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.323-329
• /
• 2002

This paper describes an efficient error-compensation technique for designing a low-error truncated Booth multiplier which produces an N-bit output from a two's complement multiplication of two N bit inputs by eliminating the N least-significant bits. Applying the proposed method, a truncated Booth multiplier for area-efficient and low-power applications has been designed, and its performance(truncation error, area) was analyzed. Since the truncated Booth multiplier does not have about half the partial product generators and adders, it results an area reduction of about 35％, compared with no-truncated parallel multipliers. Error analysis shows that the proposed approach reduces the average truncation error by approximately 60％, compared with conventional methods. A 16-b$\times$16-b truncated Booth multiplier core is designed on full-custom style using 0.35-${\mu}{\textrm}{m}$ CMOS technology. It has 3,000 transistors on an area of 330-${\mu}{\textrm}{m}$$\times$262-${\mu}{\textrm}{m}$ and 20-㎽ power dissipation at 3.3-V supply with 200-MHz operating frequency.

• Korean Journal of Occupational Health Nursing
• /
• v.17 no.2
• /
• pp.146-154
• /
• 2008

Purpose: The purpose of this study is to investigate the degree of job stress and job satisfaction and the relationship between job stress and job satisfaction of Medical Aid Client Managers. Method: Data were collected from 185 Medical Aid Client Managers in 234 areas between April 2-15, 2007. Collected data was analyzed for the frequency, t-test, ANOVA, Pearson's Correlation Coefficient etc. Results: The average score of job stress was 2.6. Job instability was highest as 2.9 and job autonomy was lowest as 2.2. in eight items. When the job stress of Medical Aid Client Managers was converted to 100 point, the average was 51.7 and ranked in upper 50% of Korean woman workers' job stress. Among the eight items, because the relationship satisfaction and the instability of duty regime ranked in upper 25% of Korean woman workers' job stress, those items were identified to have high stress. The average score of job satisfaction was 2.3 out 4.0 which could be interpreted as unsatisfactory. The correlation between the job stress and the job satisfaction demonstrated significant difference. Decrease of the job satisfaction was associated with increase of the job stress. In regard to the eight items, the inverse correlation was demonstrated to be significant in organization, inappropriate compensation, and workplace culture. Conclusion: Medical Aid Client Managers have high stress in carrying out their duties. They have experienced very severe instability in their duty regime. Also, they have felt alienated from their organization and experienced unfair rewards. They had low duty satisfaction but got a heavy workload and experienced overtime work. To relieve job overburden of Medical Aid Client Managers. it was necessary to improve business system and also was necessary to relieve a regional disparity of business charge.

• Journal of Broadcast Engineering
• /
• v.17 no.6
• /
• pp.911-923
• /
• 2012

Recently, 3DTV and 3D displays have been released in the market. Accordingly, the production of stereoscopic images has gained much interest. Stereoscopic image being composed of left and right images are currently delivered to viewers without any modifications. The researches on the enhancement of depth perception using high-frequency components and the re-production of natural color by color compensation have been carried out for 2D images. The application of such 2D technologies to 3D stereoscopic images is an aim of this paper. This paper proposes the enhancement of 3D perception by color transformation. For this, we propose a stereo matching method for obtaining a depth map and two color transformation methods such as contrast transformation and background darkening. The effectiveness of the proposed method was verified through experiments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.67-74
• /
• 2016

This paper presents a novel multiple orthogonal subcarrier modulation based UHF band RFID communication system. In tag-to-reader communication, the demonstration system can deliver 1.6 Mbps through four subcarriers. To improve data rate while suppressing increase in circuit complexity, tag employs square-waves as the subcarriers and uses individual load modulators for each subcarrier. By using multiple orthogonal subcarrier based modulation, proposed communication system can be operated under existing UHF band RFID regulation. In reader, an OFDM demodulator is used. Since the tag backscatters the reader's CW carrier, carrier frequency offset compensation is not necessary in reader demodulator. Experimental results show that the demonstration system achieves a bit error rate of 10-5 at an Eb/N0 of 10.8 dB.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.2
• /
• pp.285-293
• /
• 2016

Objectives: The aim of the study was to investigate the association of self-perceived oral health and depression in the Korean elderly. Methods: The subjects were 1,329 elderly in Korea from the sixth Korea National Health and Nutrition Examination Survey (the 6th KNHANES). The dependent variable was depression that continued more than two weeks. Model I for the impacts of depression on self-reported oral health, Model II for the impacts of depression on chewing problem, Model III for the impacts of depression on speaking problem was evaluated. PASW Statistics 18.0 version was used for frequency analysis, chi-square test and logistic regression analysis. Results: Female elderly were much more prone to depression than male. Female had lower monthly compensation, less medicaid, chewing problem, speaking problem, and less education. For these reasons, they tended to have more depression than male (p<0.001). Self-perceived oral health impacts on depression included poor self-reported oral health(p<0.01), poor chewing problem(p<0.01) and poor speaking problem(p<0.05). On the other hand, male did not show a statistically significant association. Conclusions: The study showed the self-perceived oral health related quality of life had a significant influence on depression in the elderly. The continuing lifelong oral health care can prevent depression in the later life because oral health care improvement can enhance the self-perceived oral health status.