• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.8
• /
• pp.53-61
• /
• 1998

Dynamic characteristics of widely tunable SGDBR/SSGDBR laser diodes integrated with an electroabsorption modulator is inestigated using an improved large-signal timef-domain model. First, wide tunning properties of a SGDBR laser diode and a SSGDBR laser diode are analyzed respectively and compared with each other. And, intensity-modulation characteristics of a SGDBR laser diode incorprating an electroabsorption modulator are investigated. It is shown that an external modulation has the lower frequency chirp by 1/20 for almost same extinction ratios than a direct modulation, and a nearly transform-limited pulse train can be generated using the optical gating of an electroabsorption modulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.318-326
• /
• 1993

It is not easy to diagnose rapidly the cause of trouble in the signal service which is currently provided by the fully electronic switching system such as TDX. To solve these problems, it is necessary to acquire and analyze the service signal. This paper describes the development of PCM acquirer which can analyze the signal characteristics by acquiring the PCM signal in SHW(subhighway). Also an algorithm which analyzes the acquired signal and determines the signal frequency si discussed by using CZT.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2344-2346
• /
• 2004

시간-주파수 영역 반사파 계측 시스템의 상용화를 위해서 현재 범용 장비들을 통해 구현되었던 신호 발생부, 신호 습득부. 신호 분배부, 신호 처리부의 실제 구현이 필요하다. 따라서, 본 논문에서는 그 첫 번째 단계로 시간-주파수 영역 반사파 계측 시스템에서 핵심부분인 신호 발생기를 AD9854 칩과 mega128 컨트롤러를 이용해 구현한다. 시간-주파수 영역 반사파 계측시스템의 신호 발생기 부분은 시간-주파수 영역 반사파계측 방법의 기준 신호인 첩 신호를 발생시키는 부분이다. 긴 주기를 가지는 첩 신호를 실제로 발생시키기 위해 아날로그 디바이스(Analog Device)사의 범용 통신칩으로 사용되는 AD9854와 AD9854를 제어하기 위해 아트멜(Atmel)사의 mega 128 컨트롤러를 사용하여 구현한다. 구현된 첩 신호 발생기를 실제 시간-주파수 영역 반사파 계측 시스템에 적용하여 그 성능을 검증한다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.702-708
• /
• 2019

The range resolution of echo sounders can be improved by enhancing the transducer bandwidth. We designed a bandpass matching network for expanding the bandwidth of a transducer by scaling in both impedance and frequency after transforming a lowpass network into a bandpass configuration for a third-order Bessel filter. We measured the effect of the Bessel matching network for a 50 kHz sandwich type transducer on the transmitting voltage response (TVR), receiving sensitivity (SRT) and figure of merit (FOM), using a chirp echo sounder system. Both the simulation and experimental results indicated that the transducer with a bandpass matching network was capable of producing a symmetrical acoustic output over a wider bandwidth (8.25 kHz) than was the transducer without a matching network (3.75 kHz). By implementing the Bessel matching network, we achieved a 120% bandwidth enhancement.

• Electrical & Electronic Materials
• /
• v.11 no.11
• /
• pp.28-36
• /
• 1998

Widely tunable diodes integrated with periodically sampled and chirped DBR(distributed Bragg reflector) and an EA(electroabsorption) modulator are analyzed dynamically using the improved largesinal time-domain model. The tuning characteristics of sampled- and chirped-grating DBR laser diodes are demonstrated theoretically. The results of the simulation agree well with those of the experiment. And the intensity-modulation properties of the laser diodes integrated with an EA modulator are calculated. It is shown that the external modulation has the lower frequency chirp by 1/20 for the same extinction ratio than the direct modulation, and also the short pulse train can be generated using the optical gating of an EA modulator.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.1237-1239
• /
• 2023

본 논문에서는 Linear Frequency Modulation(LFM)을 이용하여 실해역에서 실험을 진행하였다. LFM 이란 시간에 따라 주파수가 변화하는 Chirp 신호를 전송하는 통신 기법이며 성능 분석을 위해 대한민국의 한강, 서해, 남해에서 각각 실험을 진행하였다. LFM 신호의 중심 주파수는 34kHz 대역폭은 1kHz로 설정하여 실험을 진행하였으며 채널 환경 분석을 위한 5초 길이의 Tone 신호를 함께 송·수신 하였다. 실험 결과 세 곳의 실험 포인트 모두에서 송·수신 신호 간의 뚜렷한 상호상관 결과를 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.35-41
• /
• 2008

The most important requirement for the automotive radars is the simultaneous target range and velocity measurement under environment of multi-target, clutters, multi-path, and so on. If the many vehicles with 77GHz FMCW(Frequency Modulation Continuous Wave) radar system are in the near area we should consider the interference signals occurred by other radar systems because these signals reduce exact detection of range and velocity. In this paper, we propose the interference cancellation method, which each vehicle radar transmits chirp trains with the different frequency sweep shapes. The proposed method is applied into the various applications such as an intelligent vehicle, Robot, and UGV(Unmanned Ground Vehicle).

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.37-41
• /
• 2007

Fast Fourier Transformation(FFT) is one of the most useful way to analyze response signal for the purpose of grasping the dynamic characteristics of system. Excitation is a factor or process making noise or vibration. It's typical and simple experimental method widely used for catching hold of dynamic peculiar characters and modal behaviors of system by frequency analysis. There are harmonic excitation, impact excitation, random excitation, sweep excitation, chirp excitation and so on as the ideal method in an experiment using exciter. In this thesis, excitation testing module for NI-PXI equipment is developed. The analyzing module is developed with LabVIEW tool. A user can generate each waveform for shaking a structure and see quickly and easily modal shape of system with this module. This developed module will be expected to build up more convenient and serviceable measurement system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.726-734
• /
• 2012

In this paper, a practical warhead tracking filter is proposed for developing a FMCW (Frequency Modulation Continuous Wave) seeker with anti-ballistic missile capability. For reliable warhead tracking, the measurement originated from the warhead section of a ballistic target should be separated from other measurements. Futhermore, since the FMCW seeker is based on triangular frequency modulation, the multiple measurements obtained in different chirp periods should be properly associated. As a systematic way to solve the problem, the measurement pairing problem under cluttered environment is reformulated as a data association filtering problem and the PDA (Probabilistic Data Association) scheme is applied. The proposed warhead tracking filter provides better warhead tracking performance compared to the conventional range tracking algorithm and nearest neighbor warhead tracking filter. The effectiveness and reliability of the proposed method are verified using the FMCW seeker simulator.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.4
• /
• pp.347-354
• /
• 2022

The synthetic aperture radar(SAR) is an equipment that can acquire images in all weathers day and night based on radar signals. The on-board processor of satellite SAR generates transmission signal by digital signal processing, converts it into an analog signal and transmits to antenna. Until the transmission signal generated by on-board processor is output, the signal passes the transmission cables and analog devices. At this time, these hardware distort the signal and makes SAR performance worse. To improve the performance, pre-distortion technique is used. But, general pre-distortion using taylor series is not sufficient to compensate for the distortion. This paper suggests transmit signal design method with improved pre-distortion. This paper uses envelop sampling method and interpolation filter for frequency domain compensation. The proposed method accurately compensates the hardware distortion and reduces resource usage of FPGA. To analyze proposed method's performance, IRF characteristics are compared when the proposed method applies to signal with errors.