• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.943-946
• /
• 2007

The vibration and noise characteristic of the Axial-gap motor for an air conditioner were analyzed. Experimental Modal Analysis was performed to understand the vibration characteristic of the motor. The noise of motor was measured in a dead room. Finite Element Method was performed to find the vibration characteristic of the motor by using ABAQUS program.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.35-38
• /
• 2006

Using the repeaters is indispensable to WiBro services. Repeater types are distinguished by usage, output power and required performance. In the paper, we have studied on the WiBro digital optic repeater design which has excellent performance characteristic than any other repeaters. WiBro has specific characteristic on modulation method TDD(Time Division Duplex)/OFDMA(Orthogonal Frequency Division Multiple Access) so that it demands specified H/W to design WiBro repeater. Switching technique has been introduced because of TDD characteristic in each amplifier on the repeater. Time Advance technique has been considered because of OFDM characteristic among RAS(Radio Access Station) and repeater. In this paper, we have studied on these techniques to increase repeater cell coverage and distance between RAS and repeater.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.9
• /
• pp.1500-1506
• /
• 2008

In this paper, we proposed new reliability characteristic curve, which-can clearly show reliability property of transmission and substation system considering uncertainty such as frequency and duration of device fault. It express the relationship of duration of load curtailments, demand not supplied, and energy not served as “ y = $ax^{-1}$ " curve. and we proposed the method, which can objectively assess reliability of transmission and substation system using proposed characteristic curve as new reliability index. In this method, we used energy index of reliability(EIR) as a criterion of assessment. Finally, we performed a variety of case study for KEPCO system in order to verify usefulness of proposed method.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.45-48
• /
• 2001

In this paper, the characteristic of the equalizer using Lattice filter was investigated in channel ISI (Inter-Symbol Interference) in OFDM (orthogonal frequency division multiplexing) system. The equalizer using lattice filter has more fast convergence and little equalization error characteristic in two number of tap by orthogonal effect of each tap than another equalizers. The filter coefficient convergency and static BER (bit error ratio) characteristic was analysed by computer simulation. In this paper, it is shown that the equalizer using lattice filter has the better performance than a equalizer which makes use of another equalization method.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.598-604
• /
• 2015

A Chebyshev filter is well known for having a sharp skirt characteristic and equi-ripple. On the other hand, a Butterworth filter has a smooth skirt characteristic and maximally flat ripple. This paper analyzes the skirt characteristics of the filters with the cascade connection. The paper deals with the Chebyshev BPF, Cascading Chebyshev BPF, Butterworth BPF, Cascading Butterworth*Chebyshev BPF. First of all, the paper designs the prototype analog LPF in order to analyze skirt characteristics of the BPFs. Then the paper does the frequency transformation into the BPFs and tests the BPFs with cascading them. As a result, the skirt characteristics of the Chebyshev BPF was the sharpest and those of the Cascading Chebyshev BPF, Butterworth BPF, Cascading Butterworth*Chebyshev BPF was superior in order. The validity of the paper was confirmed through minute measurements of test results.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.347-354
• /
• 2006

The characteristic variation of 3-dimensional (3-D) solenoid-type embedded inductors is investigated. Four different structures of a 3-D inductor are fabricated by using a low-temperature co-fired ceramic (LTCC) process, and their s-parameters are measured between 50 MHz and 5 GHz. The circuit model parameters of each building block are optimized and extracted using the partial element equivalent circuit method and an HSPICE circuit simulator. Based on the model parameters, the characteristics of the test structures such as self-resonant frequency, inductance, and quality (Q) factor are analyzed, and predictive modeling is applied to the structures composed of a combination of the modeled building blocks. In addition, characteristic variations of the 3-D inductors with different structures using extracted building blocks are also investigated. This approach can provide a characteristic estimation of 3-D solenoid embedded inductors for structural variations.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1036-1038
• /
• 2003

Electric control of eddy coupling offers many new possibilities in process control and other industrial control applications. And a form of speed control for the load is affected for a system driven by costant frequency induction motor. This paper compare speed-torque characteristic of three types of eddy-current coupling by using the analytical method. And characteristic experiment of three types of eddy current coupling is put into operation. And then, this paper will discuss operational and magnetic field characteristic of three types model.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.78-81
• /
• 2006

In this paper, the investigation of characteristic impedance on low voltage distribution system is described The residential area of LV distribution systems is researched for the modeling. At frequency range from 1MHz to 30Mhz, the input characteristic impedances of low-voltage distribution network are obtained with experiments. The low-voltage distribution system based on the model is built at the laboratory building. S parameters are measured by performing experiments. Finally, the characteristic impedances are reported.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.59-62
• /
• 2006

For electric power applications of Bi-2223/Ag superconducting tapes, a transport characteristic is important issue. A transport characteristic is strongly depends on the magnitude and direction of external time-varying magnetic field. To verify a effect of external magnetic field, we manufactured a prototype magnet and obtained transport characteristics with respect to the magnitude, the direction and the frequency of external magnetic field. The data acquired in this paper will be used as a source for the study of HTS electric power applications which is supposed to carry on.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.318-320
• /
• 1996

This paper describes a new dc/ac inverter system, which makes use of parallel loaded high frequency resonant inverter consisting of full bridge, for achieving sinusoidal ac waveform. Because current throughout switch at turn-on is always zero in proposed inverter, low stress and low switching loss is achieved. Operating characteristic of proposed system is analyzed in per unit system using computer simulation. Output voltage of it include low harmonics and almost close tn sine wave.