• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.481-485
• /
• 2014

The applicability of the dipping, ultrasonic-assisted, heating methods to the extraction of useful components from Zostera marina was investigated. For the increase of the extraction yield of caffeic acid and rosmarinic acid from Zostera marina, ionic liquids and DES were used as additives in the extraction solvent. The optimum extraction conditions were found: dipping extraction, methanol as extraction solvent, 0.005 g of freeze-dried material powder, 5 mL methanol, 30 min and 0.5 g of DES-3 ($Et_4NCl$ and phenol) as additive. As a result, 0.19 mg/g of caffeic acid and 8.48 mg/g of rosmarinic acid were obtained. This method is simple and sensitive, and has been applied successfully to determine the component of caffeic acid and rosmarinic acid in Zostera marina and these results indicate that DES were used as additives is more suitable than traditional extraction for the extraction of useful components from Zostera marina.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.35-41
• /
• 2014

Poly(g-glutamic acid) (g-PGA) is a very promising biodegradable polymer that is produced by microorganism of Bacillus subtilis. Because g-PGA is water-soluble, anionic, biodegradable, and even edible, its potential applications have been studied from an industrial standpoint. In this study, we fabricated porous g-PGA foams by means of a freeze-solvent extraction method for tissue-engineering applications. Porous g-PGA foams were chemically cross-linked using a hexamethylene diisocyanate solution. An aqueous basic solution was used to neutralize g-PGA foam for cell culturing. During an in vitro cell culture study, it was observed that primary rabbit ear chondrocytes were well at tached and spread over the surface oft hree-dimensional cross-linkedg-PGA foam. From these results, it is concluded that cross-linkedg-PGA foam is aprom is in gmaterial for tissue-engineering applications, especially those pertaining to the regeneration of human cartilage.

• Korean Journal of Food Science and Technology
• /
• v.30 no.1
• /
• pp.139-145
• /
• 1998

This study was performed to provide fundamental data on the optimum manufacture condition of oleoresin using citron peel. Oleoresin was extracted from freeze-dried or hot air dried citron peels using various solvents (hexane, ether, dichloromethane, acetone. and methanol), mixing ratio, extraction temperature, and time. As a result, optimum extraction conditions of oleoresin were: solvent mixing ratio 1:10 (w/v), extraction time 2 hours, and extraction temperature $60^{\circ}C$ when used methanol, and their dichloromethane 1:10 (w/v), 4 hours and $20^{\circ}C$, respectively. At optimum extraction conditions, the yield of oleoresin was shown that 35.79% at hot air drying samples, 32.04% at freeze-dried ones when extracted by methanol, but shown 5.86% and 6.16% when used dichloromethane respectively. The number of volatile components present in citron oleoresin were confirmed as thirty two in methnol extracion method and twenty nine in dichloromethane extraction method by GC and GC/MS, respectively. But, in the kinds and amounts of volatile flavor components, relatively greater numbers of volatiles were identified in freeze-dried sample extracted by dichloromethane compared with other methods. In freeze-dried sample extracted by dichloromethane, volatile components of citron oleoresin predominantly occupied by limonene and ${\gamma}-terpinene$ with about 85%. Other important compounds were shown hydrocarbons. such as ${\alpha}-pinene$, myrcene, terpinolene, ${\beta}-farnesene\;and,\;{\delta}-elemene$, and linalool as alcohols.

• KSBB Journal
• /
• v.17 no.1
• /
• pp.44-48
• /
• 2002

An efficient method of extraction for carotenoids in Rhodotorula glutinis KCTC 7989 was developed. Major carotenoids produced were identified as torularhodin of 61.7%, $\beta$-carotene of 28.8%, and torulene of 9.5%. HCI treatment, as a pretreatment on cell, was necessary to carry out together with thermal treatment unlike DMSO pretreatment. The choice of solvent had an important effect on the composition of carotenoids extracted: benzene and chloroform were effective for the extraction of torularhodin, especially. However, diethyl ether was most effective for the extraction of total carotenoids. Freeze dried type cells showed high efficiency value for the extraction of carotenoids, in compared with dried and wet type cells.

• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.191-201
• /
• 2019

Petroleum industry produces one of the popular hazardous waste known as Petroleum Sludge. The treatment and disposal of petroleum sludge has created a major challenge in recent years. This review provides insights into various approaches involved in the treatment, and disposal of petroleum sludge. Various methods used in the treatment and disposal of petroleum sludge such as incineration, stabilization/solidification, oxidation, and bio-degradation are explained fully and other techniques utilized in oil recovery from petroleum sludge such as solvent extraction, centrifugation, surfactant EOR, freeze/thaw, pyrolysis, microwave irradiation, electro-kinetic method, ultrasonic irradiation and froth flotation were discussed. The pros and cons of these methods were critically considered and a recommendation for economically useful alternatives to disposal of this unfriendly material was presented.

• Korean Journal of Food Science and Technology
• /
• v.41 no.6
• /
• pp.615-621
• /
• 2009

In order to optimize the supercritical fluid extraction (SFE) conditions of volatile components from the strawberry, we conducted an evaluation of the sample preparation and SFE operating conditions. The analysis of the volatile components extracted by a variety of sample preparation protocols led to the identification of 30, 26, 30, and 34 volatile components in fresh, freeze-dried, 30% celite and 70% celite treatments, respectively. The 70% celite treatment was the most effective in extracting the volatile components from strawberry via SFE. Analysis of the volatile components extracted by a variety of SFE operating conditions yielded identifications of 34, 35, 34, and 35 volatile components at 3,000 psi (40, $50^{\circ}C$) and 6,000 psi (40, $50^{\circ}C$), respectively. The extraction yield of alcohols and acids, and the total volatile component contents, were highest under conditions of 3,000 psi and $55^{\circ}C$. Volatile components from the strawberry were extracted via SFE, simultaneous steam distillation and extraction (SDE), and solvent extraction (SE). The analysis of the volatile components extracted via different extraction methods resulted in the identification of 56, 34, and 32 volatile components in the SDE, SFE, and SE extracts, respectively. The total volatile component contents identified in the SDE, SFE, and SE extracts were $20.268{\pm}1.144$, $21.627{\pm}1.215$ and $2.476{\pm}0.177\;mg/kg$, respectively. The SFE extract evidenced higher contents of sweet flavors such as 2-methylbutanoic acid, 2-methylpropanoic acid, and hexanoic acid than the SDE and SE extracts. SFE proved to be the most appropriate method for the extraction of fresh volatile components from the strawberry.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.814-821
• /
• 1996

An attempt was made to determine the effects of drying methods including shady air drying, presteamed and shady air drying, microwave drying, and freeze drying on the volatile flavor components of Capsella bursapastoris. Essential oils from the samples were isolated by Simultaneous steam distillation-extraction (SDE) method using diethyl ether as solvent. Concentrated samples were analyzed by gas chromatography (GC) and combined gas chromatography-mass spectrometry (GC-MS). Respective 30, 18, 29, and 26 volatile flavor components were identified in shady air dried samples, presteamed and shady air dried samples, microwave dried samples, and freeze dried samples. The kinds and amounts of volatile flavor components evidently depended upon the drying methods. Trimethyl sulfide was regarded as the most abundant component in shady air dried samples, dimethyl trisulfide in presteamed and shady air dried samples, and phytol in microwave or freeze dried samples.

• Korean journal of food and cookery science
• /
• v.17 no.1
• /
• pp.55-59
• /
• 2001

To investigate the usefulness of Allium senescens as a aromatic edible plant, volatile flavor components and flavor pattern were analyzed. Essential oils of fresh and freeze dried Allium senescens were extracted by SDE(simultaneous steam distillation and extraction) method using diethyl ether as solvent. And their volatile flavor components were analyzed by gas chromatography(GC) and gas chromatography-mass spectrometry (GC-MS). A total of 46 components, including 11 hydrocarbons, 9 aldehydes, 4 alcohols, 2 esters, 7 acids, 4 ketones and 9 sulfur containing compounds were identified in fresh Allium senescens. In freeze dried Allium senescens, 8 hydrocarbons, 5 aldehydes, 3 alcohols, 5 esters, 2 acids, 3 ketones and 4 sulfur containing compounds were identified. Volatile flavor patterns of Chinese chive and Allium senescens were compared using electronic nose. The score of first principal component was significantly different in Allium senescens and Chinese chive.

• Korean Journal of Food Science and Technology
• /
• v.51 no.5
• /
• pp.447-451
• /
• 2019

6-gingerol can be converted to 6-shogaol, one of the predominant active compounds found in ginger, via processing such as drying and extraction. Subcritical water extraction is the environmentally friendly method of extraction of bioactive compounds using only purified water as a solvent. This study investigated subcritical water extraction ($190^{\circ}C$, 15 min) of 6-gingerol, and 6-shogaol from dried ginger (Zingiber officinale) including drying conditions such as temperature (room temperature, 60, $80^{\circ}C$, and freeze drying) and time duration for drying (1-4 h). The amount of 6-gingerol was found to be reduced, and that of 6-shogaol was found to be increased depending upon the water content of dried ginger. Upon oven-drying ginger at $60^{\circ}C$ for 2 h, the maximum yields of 6-gingerol ($0.18{\pm}0.02mg/g$ fresh weight), and 6-shogaol ($0.47{\pm}0.02mg/g$ fresh weight) were obtained upon subcritical water extraction.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.380-386
• /
• 1995

An attempt was made to determine the effects of drying methods including shady air drying, presteamed and shady air drying, microwave drying, and freeze drying on the volatile flavor components with Commelina communis L.. Essential oils from the samples were isolated by simultaneous steam distillation-extraction(SDE) method using diethyl ether as solvent. Concentrated samples were analyzed by gas chromatography(GC) and combined gas chromatography-mass spectrometry(GC-MS). Respective 29, 47, 36, and 24 volatile flavor components were identified in shady air dried samples, presteamed and shady air dried samples, microwave dried samples, and freeze dried samples. The kinds and amounts of volatile flavor components were evidently depended upon the drying methods. 6,10,14-trimethylpentadecanone was regarded as the most abundant component in shady air dried samples, 6,10,14-trimethyl-2-pentadecanone in presteamed and shady air dried samples, neophytadiene in microwave dried samples, and ethyl acetate in freeze dried samples.