• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.113-122
• /
• 1999

Congestion and traffic accidents occur on the merge and diverge sections in the interchange of the freeway. Studies have been conducted to reduce the traffic delay and accidents on the merge section in the freeway since 1960s. but a study was not conducted to estimate the speed variation on the merge section construct models estimated for the speed variation and suggest the appropriate measures. The purpose of this study was to identify the traffic flow characteristics on the merge section in the freeway construct the models estimated for the speed variation on the merge section in the freeway and finally establish the appropriate measure for reduction of traffic delay and accidents on the merge section in the freeway. The following results were obtained: I) Speed variations in the urban freeway appeared to be about 3.2mph, 6.5mph and 7.4mph based on the morning peak period, afternoon peak period and 24-hours period but those in the suburban freeway appeared to be about 8.0mph, 11.1mph and 10.1mph based on the same periods respectively. So different speed reduction signs need be installed to reduce delay and accidents on the merge section in the freeway based on the areas and periods as the freeway traffic management system(FTMS). ii) These models estimated for speed variation need to be studied with the changeable message sign(CMS) technique based on the real-time data so that the traffic flow could be maximized and the traffic delay and accidents be on the merge section in the freeway as more efficient freeway traffic management system(FTMS) in the near future.

• International Journal of Highway Engineering
• /
• v.17 no.4
• /
• pp.107-115
• /
• 2015

PURPOSES: This study analyzes the characteristics of traffic flow on freeway sections under daytime and nighttime conditions to improve traffic safety, and suggests a method to estimate an accurate freeway capacity value that reflects these characteristics. METHODS : The trends and differences in capacity were investigated using comprehensive field data collected under both daytime and nighttime conditions on freeway sections with designated speeds of 80, 100, and 120 kph. RESULTS : The capacity values under nighttime driving conditions were reduced by 3.3%, 6.9%, and 8.8% at 80, 100, and 120 kph, respectively. Several nighttime adjustment factors were deduced for each designated speed category from the analysis results. CONCLUSIONS : It is expected that more accurate capacity values can be estimated for freeway sections under nighttime conditions by applying the resulting adjustment factors. In addition, traffic safety will be improved through the increased efficiency of traffic management on these freeway sections.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.49
• /
• pp.125-133
• /
• 1999

Nonrecurring congestions are generally caused by random or less predictable events, such as accidents, spilled loads stalled or broken-down vehicles that, temporarily reduce the capacity of the freeway. The purpose of this paper is to present the effect of incidents on the traffic congestion on the urban freeway by simulation method. The simulation scenario is composed of two level traffic conditions, two level incident severities, and eight level incident durations. After incident, the recovering duration to the normal traffic flow, increased by linear of incident duration. Total vehicles travel time increased and average travel speed decreased by squares curve of incident duration. Considering incident impacts, incident management system is evaluated the major function of the urban freeway traffic management system. Also, necessary the related research to detect, verify, and develop effective response strategies for traffic incidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.1
• /
• pp.127-136
• /
• 2008

In these days, frequency of constructions on e freeway are increasing according as growing of the importance of e road maintenance and the road management. Work zone on the freeway where vehicles pass with high speed needs control method of lane closure and construction equipment. Because there are seldom researches in domestic study about reflecting characteristics of domestic road, sometimes we have applied for foreign cases to our traffic circumstance but it is not proper to apply for standard of other countries in our cases. foreign nation has different country square, condition of road, and level of people mind. Therefore, this study shows traffic accident characteristics in freeway work zones in Korea. At first, this study collected traffic accident data which include for 3 years $2003{\sim}2005$ in the whole freeway in Korea and then divided the data to five parts - level of the accident, type of the construction work, type of the accident, reason of the accident, according to geometric. According to comparing with non-work zones accident, this study found traffic accident characteristics in freeway work zones in Korea and suggested some alternative ideas for safety of work zones.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.127-134
• /
• 2014

PURPOSES : To operate more efficient traffic management system, it is utmost important to detect the change in congestion level on a freeway segment rapidly and reliably. This study aims to develop classification method of congestion change type. METHODS: This research proposes two classification methods to capture the change of the congestion level on freeway segments using the dedicated short range communication (DSRC) data and the vehicle detection system (VDS) data. For developing the classification methods, the decision tree models were employed in which the independent variable is the change in congestion level and the covariates are the DSRC and VDS data collected from the freeway segments in Korea. RESULTS : The comparison results show that the decision tree model with DSRC data are better than the decision tree model with VDS data. Specifically, the decision tree model using DSRC data with better fits show approximately 95% accuracies. CONCLUSIONS : It is expected that the congestion change type classified using the decision tree models could play an important role in future freeway traffic management strategy.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.38-47
• /
• 2009

This paper aims to evaluate the freeway traffic management Strategy based on exTMS according to traffic situation of freeway. As freeway user's demands increase, we thus need future-oriented and optimized traffic management. So, through improving the existing system and introducing the advanced system, these systems evaluate for not only preparing the application in real world but also preliminary feasibility. To evaluate effects of the traffic management based on exTMS, in this study, shoulder LCS, advanced VMS(assumption in it is improving next-generation system which it can be offering diverse dynamic traffic information), Ramp-metering system are applicated in simulation. In addition, this study evaluates the effect when all proposed systems are applicated, and compare the individual effect of when independent system is applicated, through considering about traffic condition of V/C=0.5, V/C=0.8, V/C=1.2. The study results show that all assumed cases, the travel speed were improved according to the increasing V/C. Furthermore, the results of evaluated the individual system show that the shoulder LCS was found to be the largest effect, and the effect of VMS(detour rate is 11%) is larger than the other cases.

• Journal of Korean Society of Transportation
• /
• v.15 no.4
• /
• pp.143-163
• /
• 1997

Incident management is significant far the traffic management systems. The management of incidents determines the smoothness of freeway operations. The dynamic nature of incidents and the uncertainty associated with them require solutions based on the incident operator's judgment. Fuzz systems attempt to adapt such human expertise and are designed to replicate the decision making capability of on operator. Fuzzy systems process complex traffic information, and transmit it in a simplified, understandable form to human traffic operators. In this study, fuzzy rules were developed based on data from real incidents on Santa Monica Freeway in LosAngeles. The fuzzy rules ail linguistic based, and hence, user-friendly. A comparison of the results from the linguistic model with the real incident durations indicate that the outputs from the model reliably correspond to real incident durations conditions. The model reliably predicts the freeway incident duration. The modes can thus be used as an effective management tool for freeway incident response systems. The approach could be applied to other problems regarding dispatch systems in transportation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1D
• /
• pp.25-32
• /
• 2011

The objective of this study is to propose a new strategy, called "freeway travel reservation strategy", to mitigate freeway traffic congestion by using advanced traffic technologies and traffic demand management policies, and to analyze its acceptability. Motorist surveys were carried out to accomplish the acceptability analysis. As a result, 73% of respondents agreed with the proposed strategy, and an increase in the inconvenience for using freeway during the major Korean Holidays, in the age, in the number of family members, and in household income resulted in higher acceptability. Additionally, married or female respondents tended to have higher acceptability. Such results can be practical for developing policies to successfully operate the proposed strategy in the future.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.63-82
• /
• 2010

In spite of continuous road construction, traffic congestion has been worsening by radical vehicle's increase and development of surroundings near expressway. Thus, the necessity of traffic management and the needs of provision of traffic information to drivers are raised. In order to solve traffic problems, such as traffic congestion, search for optimal congestion management technique and evaluation of the effect of optimal solution should be examined prior to practice of optimal alternative. However, existing traffic analysis model and simulation programs as tools to search and evaluate optimal alternative are not sufficient to reflect traffic flow characteristics, domestic road and traffic conditions and to link up to Freeway Traffic Management Systems (FTMS). Hence, to use existing traffic analysis and simulation tools are followed by hard work to need a lot of time and cost. Therefore, in this research, Expressway TRaffic Analysis Model (ExTRAM) based on Freeway Traffic Management Systems (FTMS) was developed to apply it into congestion management easily.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.95-106
• /
• 2005

Road accidents are considered as the result of a complex interplay between road, vehicle, environments, and human factors. Little study, however, has been carried out on the attributes of human factor compared to the road geometric conditions and traffic conditions. The previous researches focused on mainly both traffic and geometric conditions on specific location. Therefore, it's hard to explain phenomenon of the high traffic accident rates where road and traffic conditions are good. Because of these reasons, accident analysis has contributed on geometric improvement and has not contributed on traffic management such as selection of attention section, driver napping alert, etc. The freeway incident management is also associated with reliable prediction of incident occurrences on freeway sections. This paper presents a method for estimating the effect of trip length on freeway accident rate. A PAR (Potential Accident Ratio), the new concept of accident analysis, considering TLFDs (Trip Length Frequency Distributions) is suggested in this paper. This approach can help to strengthen freeway management and to reduce the likelihood of accidents.