• 제목/요약/키워드: Free-Surface Wave

검색결과 532건 처리시간 0.022초

2차원 자유표면파 문제에서의 방사조건 처리에 관한 고찰 (A Study on the Treatment of Open Boundary in the Two-Dimensional Free-Surface Wave Problems)

  • 김용환
    • 대한조선학회논문집
    • /
    • 제29권3호
    • /
    • pp.80-89
    • /
    • 1992
  • 자유표면파 문제에서의 방사조건을 위해 두가지 기법을 적용하여 보았다. 우선, 가상감쇠의 개념을 적용하여 일정한 구간에서 파를 감쇠시킴으로써 열린경계면(open boundary)에서 반사파를 제거하는 방법을 적용하여 보았다. 또 다른 방법으로서는 Orlanski의 방법을 변형하여 적용함으로써 단방향 파동에 대한 방사조건 처리기법을 다루었다. 몇가지의 전형적인 자유표면파문제에 대해 이들 기법을 적용하여 그 유용성을 고찰하였는데, 이들 기법은 그 적용방법이 간단하고 비선형문제에서도 사용될 수 있을 것으로 사료된다. 문제의 해법으로 기본 쏘오스 분포법이 사용되었고 비선형의 자유표면 경계조건이 적용되었다.

  • PDF

LQR 제어 기법을 적용한 수면 근처에서의 수중운동체 심도 제어 (Depth Control of a Submerged Body Near the Free Surface by LQR Control Method)

  • 김동진;이기표;최진우;이성균
    • 대한조선학회논문집
    • /
    • 제46권4호
    • /
    • pp.382-390
    • /
    • 2009
  • The submerged body near the free surface is disturbed by the 1st and 2nd order wave forces, which results in unstable movements when no control is applied. In this paper, the vertical motions of the submerged body are analyzed, and the time-variant nonlinear system for the vertical motions of the submerged body is transformed to the time-invariant linear system in state space. Next, depth controller of the submerged body is designed by using LQR control, one of the modern optimal control technique. Numerical simulation shows that effective depth controls can be achieved by LQR control.

수치파 수조를 이용한 설계파 생성에 관한 연구 (A Study on the Generation for the Design Waves with a Numerical Wave Tank)

  • 정성재;안희춘;신종근;최진
    • 대한조선학회논문집
    • /
    • 제42권3호
    • /
    • pp.205-211
    • /
    • 2005
  • In this study, a new numerical procedure for the generation of a nonlinear tailored group of waves is presented. The procedure is based on the transient wave group technique. In order to integrate the nonlinearity during the wave propagation in the computational method, the Navier-Stokes equations are applied as governing equations. The governing equations are discretized by finite volume approximation. The deformation of the free water surface in each time step is pursued with a moving grid. A two-dimensional, numerical wave tank for the simulation of the wave propagation is developed and tested in detail. The numeric results are compared first with analytical wave theories and with measurements, in order to examine the correctness of the numerical wave tank. Wave surface elevation and associated fields of velocity and pressure are numerically computed and compared with measurements. Very good agreements show up.

Free surface effects on 2-D airfoils and 3-D wings moving over water

  • Bal, Sakir
    • Ocean Systems Engineering
    • /
    • 제6권3호
    • /
    • pp.245-264
    • /
    • 2016
  • The iterative boundary element method (IBEM) developed originally before for cavitating two-dimensional (2-D) and three-dimensional (3-D) hydrofoils moving under free surface is modified and applied to the case of 2-D (two-dimensional) airfoils and 3-D (three-dimensional) wings over water. The calculation of the steady-state flow characteristics of an inviscid, incompressible fluid past 2-D airfoils and 3-D wings above free water surface is of practical importance for air-assisted marine vehicles such as some racing boats including catamarans with hydrofoils and WIG (Wing-In-Ground) effect crafts. In the present paper, the effects of free surface both on 2-D airfoils and 3-D wings moving steadily over free water surface are investigated in detail. The iterative numerical method (IBEM) based on the Green's theorem allows separating the airfoil or wing problems and the free surface problem. Both the 2-D airfoil surface (or 3-D wing surface) and the free surface are modeled with constant strength dipole and constant strength source panels. While the kinematic boundary condition is applied on the airfoil surface or on the wing surface, the linearized kinematic-dynamic combined condition is applied on the free surface. The source strengths on the free surface are expressed in terms of perturbation potential by applying the linearized free surface conditions. No radiation condition is enforced for downstream boundary in 2-D airfoil and 3-D wing cases and transverse boundaries in only 3-D wing case. The method is first applied to 2-D NACA0004 airfoil with angle of attack of four degrees to validate the method. The effects of height of 2-D airfoil from free surface and Froude number on lift and drag coefficients are investigated. The method is also applied to NACA0015 airfoil for another validation with experiments in case of ground effect. The lift coefficient with different clearance values are compared with those of experiments. The numerical method is then applied to NACA0012 airfoil with the angle of attack of five degrees and the effects of Froude number and clearance on the lift and drag coefficients are discussed. The method is lastly applied to a rectangular 3-D wing and the effects of Froude number on wing performance have been investigated. The numerical results for wing moving under free surface have also been compared with those of the same wing moving above free surface. It has been found that the free surface can affect the wing performance significantly.

수중익에 의한 비선형 조파현상의 수치해석 (Numerical Computations for Hydrofoil-Generated Nonlinear Waves)

  • 이홍기;배광준
    • 대한조선학회논문집
    • /
    • 제30권3호
    • /
    • pp.29-40
    • /
    • 1993
  • 본 연구는 정수면으로 부터 얕게 잠겨 항주하는 3차원 수중익에 의한 비선형 조파현상의 특성규명을 위한 기초연구로서 수중익이 예인수조안에서 일정속도로 항주할 때 자유표면에 발생하는 비선형 파형의 특성과 수중익에 작용하는 유체력을 계산하기 위한 수치해법의 개발을 목적으로 하였다. 수치해법으로는 변분원리에 기초한 유한요소법올 사용하였으며 수중익 근처에서는 비선형 자유표면조건을 엄밀하게 만족시켰고 수중익으로 부터 충분히 떨어진 영역에서는 종래의 선형화된 자유표면 경계조건을 만족시켰다. 수치해법의 계산효율을 높이기 위하여 비선형영역과 선형영역 사이에 인위적인 비선형-선형 완충영역을 도입하여 계산영역을 크게 줄였다. 수중익을 간단한 직사각형 보오텍스계로 표현하여 유속과 몰수길이, 보오텍스의 세기 및 분포의 변화에 따른 비선형 파형의 특성을 조사하였으며 특히 자유 보오텍스선이 비선형 파형에 미치는 영향을 파악하였다. 파동에 의하며 수중익에 유기되는 속도성분들의 크기 및 분포, 양력 및 유기항력에 대한 계산을 수행하여 자유표면의 비선형성에 의한 영향을 규명하였다.

  • PDF

트랜섬 선미를 가지는 선형의 포텐셜 유동해석 (Potential How Analysis for a Hull with the Transom Stern)

  • 최희종;전호환
    • 한국해양공학회지
    • /
    • 제15권1호
    • /
    • pp.1-6
    • /
    • 2001
  • This study focuses on the potential flow analysis for a hull with the transom stern. The method is based on a low order panel method. The Kelvin type free-surface boundary condition which is known to better fit experimental data for a high speed is applied. To treat a dry transom stern effect a special treatment for the free-surface boundary condition is adopted at the free-surface region after the transom stern. Trim and sinkage, which are important in high speed ships, are considered by an iterative method. Pressure and momentum approaches are used to calculate the wave resistance. Numerical calculations are performed for Athena hull and these results are compared with the experimental data and also other computational results.

  • PDF

Pseudo 3D FEM analysis for wave passage effect on the response spectrum of a building built on soft soil layer

  • Kim, Yong-Seok
    • Earthquakes and Structures
    • /
    • 제8권5호
    • /
    • pp.1241-1254
    • /
    • 2015
  • Spatially variable ground motions can be significant on the seismic response of a structure due to the incoherency of the incident wave. Incoherence of the incident wave is resulted from wave passage and wave scattering. In this study, wave passage effect on the response spectrum of a building structure built on a soft soil layer was investigated utilizing a finite element program of P3DASS (Pseudo 3-dimensional Dynamic Analysis of a Structure-soil System). P3DASS was developed for the axisymmetric problem in the cylindrical coordinate, but it is modified to apply anti-symmetric input earthquake motions. Study results were compared with the experimental results to verify the reliability of P3DASS program for the shear wave velocity of 250 m/s and the apparent shear wave velocities of 2000-3500 m/s. Studied transfer functions of input motions between surface mat foundation and free ground surface were well-agreed to the experimental ones with a small difference in all frequency ranges, showing some reductions of the transfer function in the high frequency range. Also wave passage effect on the elastic response spectrum reduced the elastic seismic response of a SDOF system somewhat in the short period range.

패널법을 이용한 유한수심에서의 조파저항 계산 (Computation of Wave Resistance in the Water of Finite Depth Using a Panel Method)

  • 이승준
    • 대한조선학회논문집
    • /
    • 제29권4호
    • /
    • pp.66-74
    • /
    • 1992
  • 유한수심의 해역에서 운동하는 잠수체 혹은 부유체의 조파저항을 계산하기 위하여 Hess & Smith(1962)와 Dawson(1977)류의 패널법을 개발하였다. 수면상에서의 경계조건은 소위 Poisson 식을 사용하였는데, 비슷한 문제에 대해 Yasukawa(1989)는 이중물체유동을 기본유동으로 하는 Damson식을 사용한 바 있다. 수저면에서의 경계조건을 자동적으로 만족시키기 위하여 Rankine 쏘오스와 수저면에 대한 경상 쏘오스의 합을 Green 함수로 취하였으며, 따라서 특이점은 선체와 자유표면 상에만 분포시키면 되므로 필요한 패널의 수는 Yasukawa의 방법에 비해 절반이하로 감소되었다. 계산예로서는 잠수한 구와 Wigley선형을 택하였으며, 기존의 해석해 및 수치해와 비교하여 잘 일치하는 결과를 얻었다.

  • PDF

Internal Waves of a Two-Layer Fluid with Free Surface over a Semi-circular bump

  • Choi J. W.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 1995년도 추계 학술대회논문집
    • /
    • pp.126-131
    • /
    • 1995
  • In this paper we study steady capillary-gravity waves in a two-layer fluid bounded above by a free surface and below by a horizontal rigid boundary with a small obstruction, Two critical speeds for the waves are obtained. Near the smaller critical speed, the derivation of the usual forced KdV equation (FKdV) fails when the coefficient of the nonlinear term in the FKdV vanishes. To overcome this difficulty, a new equation called a forced extended KdV equation (FEKdV) governing interfacial wave forms is obtained by a refined asymptotic method. Various solutions and numerical results of this equation are presented.

  • PDF

Stream Function Wave Theory에 관한 고찰

  • 여운광;편종근
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 1983년도 제25회 수공학 연구발표회 논문초록집
    • /
    • pp.78-79
    • /
    • 1983
  • It is well known that small amplitude wave theory, a first approximation to the complete theoretical description of wave behavior, yields a maximum investment in mathematical endeavor. But, if the wave amplitude is large, the small amplitude considerations are not valid, and finite amplitude wave theory which retains higher-order terms to obtain an accurate representation of the wave motion is numercal theory. The Stream function wave theory, one of the numerical methods, was developed by Dean for use with asymmetric measured wave profiles and with symmetric theoretical wave profiles. Dalrymple later improved the comjputational procedure by adding two Lagrangian constraints so that more efficient convergence of the iterative numerical method to a specified wave heigh and to a zero mean free surface displacement resulted. This paper introduces in details the Dean and Darlymple Stream Function Method in case of the symmetric theoretical wave, because in design purposes, wave height and wave period are given.

  • PDF