• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.524-533
• /
• 2020

The free-trade-zone system has been implemented in industrial-complex-type free-trade zones with a focus on the manufacturing industry since 1970, and was intended to attract foreign investment and increase trade by providing benefits such as tax reduction and deregulation to tenant companies. However, foreign investment in these industrial-complex-type free trade zones has decreased significantly. On the other hand, port-type free-trade zones have great potential to attract foreign investment for development due to the increase in port traffic. The developmental trends in the free-trade-zone system have been studied primarily in the manufacturing industry, and those studies must be extended. In this paper, the role and operation of free-trade zones are examined and problems highlighted. We analyzed a business model specialized in port-type free-trade zones to identify problems, propose measures to improve the system for re-exporting domestic goods to the customs area for storage, and upgrade overall operations. The effects of our measures were analyzed by simple simulation. These proposed improvements in the operation of port-type free-trade zones will help attract foreign companies to these international logistics hubs and global delivery centers.

• Geophysics and Geophysical Exploration
• /
• v.11 no.2
• /
• pp.116-126
• /
• 2008

In gas hydrate survey, seismic amplitude and frequency characteristics play a very important role in determining whether gas hydrate exists. According to the variation of source frequency and scatterer size, we study seismic amplitude characteristics using elastic modeling applied at staggered grids. Generally speaking, scattering occurs in proportion to the square of source frequency and the scatterer volume, which has an effect on seismic amplitude. The higher source frequency is, the more scattering occurs in gas hydrate bearing zone. Therefore, BSR is hardly observed in high frequencies. On the other side, amplitude blanking zone and BSR is clearly observed in lower frequencies although the resolution is poor as a whole. Seismic reflections traveling through free-gas layer below gas hydrate bearing zone decay so severely a high frequency component that a low frequency term is dominant. Amplitude anomaly of BSR result from high acoustic impedance contrast due to free-gas, which is a very crucial factor to estimate gas hydrate bearing zone. Seismic frequency analysis is carried out using wavelet transform method that frequency component could be decomposed with time variation. In application of wavelet transform to the seismic physical experiments data, we can observe that reflections traveling through air layer, which corresponds to the free-gas layer, decay a high frequency component.

• Journal of Navigation and Port Research
• /
• v.35 no.6
• /
• pp.533-538
• /
• 2011

Recently, Free Trade Area generally moves toward a complex and total zone carrying out the logistics and production function simultaneously. Nevertheless, Free Trade Area of Gwangyang Bay Area performs a traditional logistics function only without a introduction of production function. Therefore, the purpose of this research is to suggest alternatives for strengthening the function of Free Trade Area of Gwangynag port. The main findings of this research is summarized as followings. First, a complex and total Free Trade Area through enhancing a production function is to be established. Second, for an efficient management & operation of Free Trade Area, a cooperative system establishment between Free Trade Areas and a single operation system is necessary.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.767-773
• /
• 2001

We investigated the impacts of the fairy-ring of Tricholoma matsutake on the dynamics of soil microflora and soil enzyme activities by grouping the soils around the fairy-ring of T. matsutake into four regions. The regions were grouped as 'zone of decayed mycorrhizae', 'zone of mycorrhizae for fruiting', 'zone of physiologically active mycorrhizae' and 'zone free from mycorrhizal infection'. Soil fungi and actinomycetes were quite little at the soils around the fairy-ring of T. matsutake compared to those of general forest soils, and there were significant differences among the four regions. The soils with the mycelial cluster of T. matsutake showed about one third of microbial population compared to those in the zone free from mycorrhizal infection, which indicated that T. matsutake took a dominant position within the fairy-ring of the fungus. We could manifest that T. matsutake showed a distinctive characteristics of mycorrhizal fungus since the activities of dehydrogenase were significantly different between the zone of physiologically active mycorrhizae and the zone free from mycorrhizal infection. The dehydrogenase activity was the highest at the early season of fruiting around the fairy-ring of T. matsutake, while the acid-phosphatase activity increased from March to June followed by a slight decrease on August and peaked on October. This phenomenon made us infer that the vitality of T. matsutake be sustained after fruiting.

• Ocean Systems Engineering
• /
• v.6 no.4
• /
• pp.377-400
• /
• 2016

Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry (DORIS, 2016). Objects may accidentally fall down from platforms or vessels during lifting or any other offshore operation. Proper planning of lifting operations requires the knowledge of the risk-free zone on the sea bed to protect underwater structures and equipment. To this end a three-dimensional (3D) theory of dynamic motion of dropped cylindrical object is expanded to also consider ocean currents. The expanded theory is integrated into the authors' Dropped Objects Simulator (DROBS). DROBS is utilized to simulate the trajectories of dropped cylinders falling through uniform currents originating from different directions (incoming angle at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, and $270^{\circ}$). It is found that trajectories and landing points of dropped cylinders are greatly influenced by the direction of current. The initial conditions after the cylinders have fallen into the water are treated as random variables. It is assumed that the corresponding parameters orientation angle, translational velocity, and rotational velocity follow normal distributions. The paper presents results of DROBS simulations for the case of a dropped cylinder with initial drop angle at $60^{\circ}$ through air-water columns without current. Then the Monte Carlo simulations are used for predicting the landing point distributions of dropped cylinders with varying drop angles under current. The resulting landing point distribution plots may be used to identify risk free zones for offshore lifting operations.

• Geomechanics and Engineering
• /
• v.31 no.5
• /
• pp.519-527
• /
• 2022

Shear failure in soil is the primary cause of most geotechnical structure failures or instability. Soil water content is a significant factor affecting soil shear strength. In this study, the shear strength of samples with different water contents was tested. The shear strength, cohesion, and internal friction angle decreased with increasing water content. Based on the variation of cohesion and internal friction angle, the water content zone was divided into a high-water content zone and low-water content zone with a threshold water content of 15.05%. Cohesion and internal friction angle have a good linear relationship with water content in both zones. Environmental Scanning Electron Microscopy (ESEM) test presented that the aggregates size of the compacted loess gradually increases with increasing water content. Meanwhile, the clay in the compacted loess forms a matric that envelops around the surface of the aggregates and fills the inter-aggregates pores. A quantitative analysis of bound water and free water under different water contents using a nuclear magnetic resonance (NMR) test was carried out. The threshold water content between bound water and free water was slightly below the plastic limit, which is consistent with the results of shear strength parameters. Combined with the T2 distributions obtained by NMR, one can define a T2 relaxation time of 1.58 ms as the boundary point for bound water distribution without free water. Finally, the effects of bound water and free water on shear strength parameters were analyzed using linear regression analysis.

• Journal of the Society of Naval Architects of Korea
• /
• v.51 no.1
• /
• pp.58-66
• /
• 2014

Numerical simulations for the flows containing free surface remain difficult problems because the drastic differences of physical properties of water and air, The difference of densities makes the solution instable in particular. For the stabilities of the solutions, the most typical methods to simulate free surface flows, such as Volume Of Fluid(VOF) and Level-Set(LS) methods, impose transient zones where the physical prosperities are continuously distributed. The thickness of the transient zone is the source of the numerical errors. The other side, marker-density method does not use such a transient zone. In the traditional marker-density method, however, the air velocities of free surface cells are extrapolated from the water velocity, and the pressures on the free surface are extrapolated from the air pressures for the stability of the solution. In this study, the marker-density method is modified for the decrease of such numerical errors. That is, the pressure on the free surface is determined to coincide with the pressure gradient terms of the governing equations, and the velocity of free surface cells are calculated with the governing equations. Two-dimensional steady spilling breakers behind of a submersed hydrofoil and three-dimensional spilling breaker near a wedge shaped ship model are simulated using INHAWAVE-II including the modified marker-density(MMD) method. The results are compared with the results of Fluent V6.3 including VOF method and several published research results.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.04a
• /
• pp.255-263
• /
• 1998

Dust-free garment prevents contamination which otherwise is caused by skin and clothes to protect from dust or dirt. Therefore, it requires high performance and should function as a working clothes. Clothes are a medium between human and thermal environmental system, and it is required to study human enviroment to ensure comfortableness of clothes and to satisfactorily go along with enviroment .This study investigates the physical and physiological features of dust-free garment used in the clean room at a semiconductor factory in oredr to scientifically clarify what the dust-free garmint is as well as to contribute to the design and development of high performance material and clothes. Three kinds of dust-free fabrics (DFG-I, DFG-II, DFG-III) which are being developed by a local company are used to manufacture dust-free garment. These dust-free garments are dressed and tested in such an enviroment as similar to semiconmemts with temperature at 23${\pm}$1$^{\circ}C$ and humidity at 50${\pm}$5%RH in order to investigate the thermo physiological and psychological features of human body. The results of this study are as follows. The results of this study are as follows. 1.The mean skin temperature was significantly different among the clothes, subjects and experimental time. Temperature tends to rise from the time of exercising load. Continuous motion coupled sealed clothes prevents heat transmittance, and temperature rises in the order of DFG-l, DFG-ll and DFG-lll as time course. 2.As for the skin temperature by local timperature is minimun on the head and torso and increares remarkably at the terminal part of human body. 3. As for the body mass loss was significantly higher in DFG-lll than DFG-l and DFG-ll. 4. Though there is no significant difference in the temperature within clothes among the kind of clothes temperature is 1$^{\circ}C$ higher in the back. Temperature within all the dust-free garments 29.7$^{\circ}C$ in the back and 31.3$^{\circ}C$ in the chest which belong to the comfort zone(31-33$^{\circ}C$). The relative humidity is 39.7%RH in the chest and 33.8%RH in the back which is slightly below the comfort zone(40-60%RH) 5. The thermal sensation belong to the comfort zone regardless of the kinds of clothes. The subjects feels a slight fatigue as times goes. As for the subjective sense of subjects the mean skin temperature as well as temperature and humidity within clothes show similar tendency. This means that they relate with each other.

• Journal of Digital Convergence
• /
• v.19 no.1
• /
• pp.167-176
• /
• 2021

Incheon Port urgently requires designation of a free trade zone to pursue development linked with the port hinterland while promoting continuous growth of the port. This study aims to evaluate the optimal location and derive policy implications for the designation of a free trade zone and analyzed factors property divided by groups. This study used the Consistent Fuzzy Preference Relation (CFPR) analysis technique to derive a practical construction direction by quantifying and evaluating linguistic measures. As a result, the Incheon New Port hinterland showed the highest location competitiveness among the four candidate areas of Incheon New Port hinterland, Aam Logistics Complex 2, North Port hinterland, and Gyeongin Port hinterland. Among the eight evaluation factors consisting of qualitative and quantitative factors, the Incheon New Port hinterland ranked no. 1 in all the four qualitative factors and one quantitative factor and received the highest total score. Also, Group 1 presented 'possibility to attract tenant companies' as first. Group 2 was 'complex size' and Group 3 was also 'possibility to attract tenant companies'. This study has the implication for suggesting the factors and evaluation structure of Free Trade Zone. Future research requires detailed empirical studies, such as expanding the subject of study or selecting factors that reflect the interests of each group.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.507-510
• /
• 2007

Piston cores retrieved from the western Ulleung Basin, East Sea were analyzed to examine the potential for hydrocarbon generation and to determine the hydrocarbon indicators. 2D multi-channel reflection seismic and Chirp data were also investigated for mapping and characterizing the geophysical hydrocarbon indicators such as BSR (bottom simulating reflector), blank zone, pock-mark etc. High organic carbon contents and sedimentation rates that suggest good condition for hydrocarbon generation. High pressure and low temperature condition, and high residual hydrocarbon concentrations are favor the formation of natural gas hydrate. In the piston cores, cracks generally oriented to bedding may indicate the gas expansion. The seismic data show several BSRs that are associated with natural gas hydrates and underlying free gas. A number of vertical to sub-vertical blank zones were well identified in the seismic sections. They often show the seismic pull-up structures, probably indicating the presence of high velocity hydrates. Numerous pockmarks were also observed in the Chirp profiles. They may indicate the presence of free gas below the hydrate stability zone as well.