• 한국해안해양공학회지
• /
• 제5권3호
• /
• pp.204-211
• /
• 1993

Laplace 방정식을 Green 공식으로 해석한 경계요소법을 이용하여 수치수조에서 비선형파를 재현하였다. 미지수는 유체영역의 경계에 설정한 각 절점에서의 속도포텐셜과 수면변위이며 이를 구하기 위하여 지배방정식과 자유수면 경계조건을 기본식으로 하는 연립 1차방정식을 구성하였다. 동력학적 자유수면 경계조건에서 속도의 제곱항을 고려하였으며 자유수면 경계에서 속도포텐셜의 연직변화를 고려하여 이의 시간미분을 계산하였다. 본 수치모델을 이용하여 고립파와 Stokes의 2차 파낭을 재현한 결과, 이론치와 매우 잘 일치함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.219-235
• /
• 2014

With the development of the technology of underwater moving bodies, the need for developing the knowledge of surface effect interaction of free surface and underwater moving bodies is increased. Hence, the two-phase flow is a subject which is interesting for many researchers all around the world. In this paper, the non-linear free surface deformations which occur during the water-exit of a circular cylinder due to its buoyancy are solved using finite volume discretization based code, and using Volume of Fluid (VOF) scheme for solving two phase flow. Dynamic mesh model is used to simulate dynamic motion of the cylinder. In addition, the effect of cylinder mass in presence of an external force is studied. Moreover, the oblique exit and entry of a circular cylinder with two exit angles is simulated. At last, water-exit of a circular cylinder in six degrees of freedom is simulated in 3D using parallel processing. The simulation errors of present work (using VOF method) for maximum velocity and height of a circular cylinder are less than the corresponding errors of level set method reported by previous researchers. Oblique exit shows interesting results; formation of waves caused by exit of the cylinder, wave motion in horizontal direction and the air trapped between the waves are observable. In 3D simulation the visualization of water motion on the top surface of the cylinder and the free surface breaking on the front and back faces of the 3D cylinder at the exit phase are observed which cannot be seen in 2D simulation. Comparing the results, 3D simulation shows better agreement with experimental data, specially in the maximum height position of the cylinder.

• 한국가시화정보학회지
• /
• 제9권3호
• /
• pp.59-64
• /
• 2011

In this study the change of free surface vortex is expressed through the time volume fraction using multiphase unsteady condition in sump, because in previous studies of the pump sump did not represent the behavior of the free surface vortex exactly due to the reason it was calculated using single phase and steady condition. The reliability of the computational analysis is verified through comparing experimental results with that of present numerical analysis. Homogeneous free surface model is used to apply interactions of air and water. The results show that the free surface vortex can be identified on the isotropic surface at air volume fraction 1%~5%. The vortices make an air column from the free surface to the sump intake and are created and destroyed repeatedly. The behavior of free surface vortex at numerical analysis is quite similar to experimental test. The result of vortex motion according to time, works on a cycle.

• Journal of Hydrospace Technology
• /
• 제2권1호
• /
• pp.10-17
• /
• 1996

If a point impulse travels over free surface of water of finite depth, surface waves consist of divergent waves. The crestlines of those divergent waves are short and end on the cusp line if the impulse travels at a subcritical speed. But the crestlines become infinitely long and there are no cusps if the impulse travels at a supercritical speed.

• 한국해양공학회지
• /
• 제14권3호
• /
• pp.35-40
• /
• 2000

SMAC method is, one of the numerical simulation techniques, modified from the original MAC for the time-dependent variation of fluid flows. The Navier-Stokes equation for incompressible time-dependent viscous flow is applied and, also marker particles which move with the fluid are used. Two-dimensional numerical computations of fluid flow are carried out in a virtual water tank. This paper has shown very well the movements of marker particles using SMAC method.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.98-111
• /
• 1993

2차원 비정상 비선형 자유표면파를 해석하고 자유표면파에서의 점성효과를 관찰하였다. 유동장내의 Navier-Stokes 방정식과 연속방정식을 풀기 위해 유한해석법을 적용하였고, 자유표면의 처리를 위해 MAC 기법을 적용하였다. 그리고, 자유표면에서는 표면장력을 고려한 경계조건을 적용하였으며, 층류에 대한 점성효과만을 고려하였다. 계산모델은 천수역에서의 점성영향, 자유표면 근처에서의 보오텍스 쌍(vortex-pair)의 거동 및 전진하는 부유체 앞에서의 자유표면파문제 등이다. 천수역문제에서는 바닥과의 마찰에 기인한 자유표면파의 변화를 고찰하였으며, 특히 고립파에 대한 적용으로서 파고의 감소정도, 수직벽면에서의 파상승(wave run-up) 및 수심의 변화로 인한 유장변화 등을 살펴보았다. 보오텍스 문제에서는 보오텍스의 이동에 따른 자유표면주위의 유동변화를 관찰하였으며, 사각부유체 주위의 유동문제에서는 전진속도의 차이에 따른 자유표면파의 차이 및 물체주위의 유동특성을 관찰하였다.

• 대한조선학회논문집
• /
• 제40권4호
• /
• pp.22-29
• /
• 2003

New high-speed depressurized circulating water channel was designed by using the CFD code. Flow in the channel has free surface and pressure in the test section can be depressed. In this study, Flow separation and bubble occurrence were considered in designing the contraction nozzle shape for better flow uniformity Tn the test section. To supplement velocity defect due to the free surface, nozzle injection system more effective in high-speed flow was installed instead of drum system. Necessary power and injection techniques were proposed. And guide vane arrangement was analyzed to reduce the flow resistance and keep quiet free surface from ´surging´. Wave absorber was devised to reduce the wave resistance and to prevent the entrainment of air to the diffuser.

• 한국가시화정보학회지
• /
• 제6권2호
• /
• pp.28-32
• /
• 2008

Contrary to the flow rate in fully filled pipe flows, the flow rate in partially filled pipe flows is significantly influenced by the variation of water level, channel slop, and so on. The major difference in these two flows results from the existence of a free surface. To make it clear, in the present study, a similarity of the velocity profile in a partially filled circular pipe has been investigated according to the water level. A particle image velocimetry (PIV) technique was applied to measure the three-dimensional velocity profiles. As a result, there is found a similarity of the velocity profile near the central region. However, near the side wall, the similarity is broken due to the interaction between the wall and the free surface.

• 한국수자원학회논문집
• /
• 제45권4호
• /
• pp.349-360
• /
• 2012

본 연구에서는 3차원 점성 흐름에 적용될 수 있는 비정수압 자유수면 모형을 수평방향 직교 곡선좌표계에서 개발하였다. 개발된 수치모형은 엇갈린 격자를 사용함으로써 발생되는 자유수면에서의 경계조건 종결 문제를 수면층 방정식을 도입하여 해결하였으며, 난류의 유동 해석을 위한 폐합식으로 등방성의 k-${\varepsilon}$ 난류모형을 이용하였다. 본 연구에서 운동량방정식은 이송-확산항만으로 중간단계의 유속을 예측하고, 압력 및 중력을 포함하는 생성항과 연속방정식을 결합하여 다음 시간단계의 유동장을 결정하는 계산 단계 분리법을 이용하였다. 수치모형의 적용성 평가를 위하여 폐쇄된 2차원 수조에서의 취송류, 급경사를 가지는 2차원 수로에서의 흐름, 원심력에 의한 이차류 흐름특성 분석을 위한 3차원 급변 만곡류에 대한 모의를 실시하였다. 수치모의 예측치는 수리모형 실험값과 수위, 유속, 난류특성 등에서 일치하는 양상을 보이는 것이 확인되었다.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1784-1793
• /
• 2001

The flow fields around an elliptic cylinder of axis ratio AR=2 adjacent to a free surface were investigated experimentally using a water channel. The main objective is to understand the effect of the free surface on the flow structure in the near-wake. The flow fields were measured by varying the depth of cylinder submergence, for each experimental condition, 350 velocity fields were measured using a single-frame PIV system and ensemble-averaged to obtain the spatial distribution of turbulent statics. For small submergence depths a large-scale eddy structure was observed in the near-wake, causing a reverse flow near the free surface, downstream of the cylinder. As the depth of cylinder submergence was increased, the flow speed in the gap region between the upper surface of the cylinder and the free surface increased and formed a substantial jet flow. The general flow structure of the elliptic cylinder is similar to previous results for a circular cylinder submerged near to a free surface. However, the width of the wake and the angle of downward deflection of the shear layer developed from the lower surface of the elliptic cylinder are smaller tan those for a circular cylinder.