• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.1
• /
• pp.140-149
• /
• 2006

Characteristics of a laminar diffusion flame placed near wall in microgravity have been numerically analyzed in a two-dimension. The fuel for the flame is $C_2H_4$. The flame is initiated by imposing a high temperature ignition source. The flow field, temperature field, and flame shape in microgravity diffusion flame are detailed. Especially, effects of surrounding air velocity and fuel injection velocity on the microgravity diffusion flame have been discussed accounting for standoff distance. And, the effect of curvature rate has been also studied. The results showed that velocities in a diffusion flame were overshoot because of volumetric expansion and distribution of temperature showed regularity by free-buoyancy This means that the diffusion flame in microgravity is very stable, while the flame in normal gravity is not regular and unstable due to buoyancy. Standoff distance decreases with increase in surrounding air velocity and with decrease in fuel injection velocity. With increasing curvature rate, the position of reaction rate moves away the wall.

• Journal of the Korean institute of surface engineering
• /
• v.51 no.1
• /
• pp.47-53
• /
• 2018

Sn-based lithium-ion batteries have low cost and high theoretical specific capacity. However, one of major problem is the capacity fading caused by volume expansion during lithiation/delithiation. In this study, 3-dimensional foam structure of Cu-Sn alloy is prepared by co-electrodeposition including large free space to accommodate the volume expansion of Sn. The Cu-Sn foam structure exhibits highly porous and numerous small grains. The result of EDX mapping and XPS spectrum analysis confirm that Cu-Sn foam consists of $SnO_2$ with a small quantity of CuO. The Cu-Sn foam structure electrode shows high reversible redox peaks in cyclic voltammograms. The galvanostatic cell cycling performances show that Cu-Sn foam electrode has high specific capacity of 687 mAh/g at a current rate of 50 mA/g. Through SEM observation after the charge/discharge processes, the morphology of Cu-Sn foam structure is mostly maintained despite large volume expansion during the repeated lithiation/delithiation reactions.

• Molecules and Cells
• /
• v.37 no.6
• /
• pp.473-479
• /
• 2014

Spermatogonial stem cells (SSCs, also called germline stem cells) are self-renewing unipotent stem cells that produce differentiating germ cells in the testis. SSCs can be isolated from the testis and cultured in vitro for long-term periods in the presence of feeder cells (often mouse embryonic fibroblasts). However, the maintenance of SSC feeder culture systems is tedious because preparation of feeder cells is needed at each subculture. In this study, we developed a Matrigel-based feeder-free culture system for long-term propagation of SSCs. Although several in vitro SSC culture systems without feeder cells have been previously described, our Matrigel-based feeder-free culture system is time- and cost-effective, and preserves self-renewability of SSCs. In addition, the growth rate of SSCs cultured using our newly developed system is equivalent to that in feeder cultures. We confirmed that the feeder-free cultured SSCs expressed germ cell markers both at the mRNA and protein levels. Furthermore, the functionality of feeder-free cultured SSCs was confirmed by their transplantation into germ cell-depleted mice. These results suggest that our newly developed feeder-free culture system provides a simple approach to maintaining SSCs in vitro and studying the basic biology of SSCs, including determination of their fate.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.1
• /
• pp.17-26
• /
• 2014

This paper presents a dynamic crack propagation algorithm based on the Moving Least Squares(MLS) difference method. The derivative approximation for the MLS difference method is derived by Taylor expansion and moving least squares procedure. The method can analyze dynamic crack problems using only node model, which is completely free from the constraint of grid or mesh structure. The dynamic equilibrium equation is integrated by the Newmark method. When a crack propagates, the MLS difference method does not need the reconstruction of mode model at every time step, instead, partial revision of nodal arrangement near the new crack tip is carried out. A crack is modeled by the visibility criterion and dynamic energy release rate is evaluated to decide the onset of crack growth together with the corresponding growth angle. Mode I and mixed mode crack propagation problems are numerically simulated and the accuracy and stability of the proposed algorithm are successfully verified through the comparison with the analytical solutions and the Element-Free Galerkin method results.

• Korean Journal of Optics and Photonics
• /
• v.11 no.5
• /
• pp.347-352
• /
• 2000

We have stabIhzed the laser frequency of a commercial dIode laser using a ULE (Ultra-low expansion material) reference cavIty and the cunent modulation charactenstics of the dIode itself The liuewIdth of the frce running laser was about a 1 MHz (rms) for a sampling time of 1 s and the drift rate was 300 kHz/s. Vvhen the laser is locked to oue sIde of the transmission signal from the ULE reference cavity, the lincwidth was reduced to 46 kHz (nus) for a sampling time longer than 10 ms. The root Allan variance was less than 2 kHz for a sampling time langeI than10 ms. 10 ms.

• Membrane and Water Treatment
• /
• v.8 no.1
• /
• pp.35-50
• /
• 2017

The theoretical membrane gas absorption module treatments in a hollow fiber gas-liquid membrane contactor using Happel's free surface model were obtained under countercurrent-flow operations. The analytical solutions were obtained using the separated variable method with an orthogonal expansion technique extended in power series. The $CO_2$ concentration in the liquid absorbent, total absorption rate and absorption efficiency were calculated theoretically and experimentally with the liquid absorbent flow rate, gas feed flow rate and initial $CO_2$ concentration in the gas feed as parameters. The improvements in device performance under countercurrent-flow operations to increase the absorption efficiency in a carbon dioxide and nitrogen gas feed mixture using a pure water liquid absorbent were achieved and compared with those in the concurrent-flow operation. Both good qualitative and quantitative agreements were achieved between the experimental results and theoretical predictions for countercurrent flow in a hollow fiber gas-liquid membrane contactor with accuracy of $6.62{\times}10^{-2}{\leq}E{\leq}8.98{\times}10^{-2}$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.11a
• /
• pp.75-78
• /
• 2007

The steel slag, a by-product which is produced by refining pig iron during the manufacture of steel, is mainly used as road materials after aging. It is necessary to age steel slag for long time in air because the reaction with water and free-CaO in steel slag could make the expansion of volume. This problem prevents steel slag from being used as aggregate for concrete. However, steel slag used in this study was controled by a air-jet method which rapidly cools substance melted at a high temperature. The rapidly-chilled method would prevent from generation of free-CaO in steel slag. Also, Molten steel slag rapidly-chilled by air in high speed becomes a fine aggregate of nearly spherical shape. This study dealt with the influence of the using rate of rapidly-chilled steel slag and polymer resin on fluidity of polymer concrete, as a results Since RCSS has spherical shape and high density, up to replacement ratio of 100%, increases concrete fluidity under same polymer content and decrease polymer content in order to secure the same fluidity

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.1
• /
• pp.40-48
• /
• 2024

This study judged that although milk with various properties is currently being released, the growth rate of the milk market has not changed significantly, and the reason for this is that a substitution relationship has been formed between existing white milk and milk with various properties and they are competing with each other. The purpose of this study was to provide implications for the future growth of the milk market by identifying the relationship between diversified milk attributes. As a research method for this purpose the own price elasticity, cross-price elasticity, and expenditure elasticity of each attribute were derived through the LA/AIDS demand system model, and an analysis of consumers' milk purchasing factors was conducted through factor analysis. Based on the analysis results, it presented implications for growth in the milk market, such as expanding products with great differentiation in attributes such as flavor, plant and lactose-free properties, establishment of marketing strategies targeting consumers with children, and expansion of online malls.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.206-217
• /
• 2015

This paper presents a complete S-shape feed rate scheduling approach (CSFA) with confined jerk, acceleration and command feed rate for parametric tool path. For a Non-Uniform Rational B-Spline (NURBS) tool path, the critical points of the tool path where the radius of curvature reaches extreme values are found firstly. Then, the NURBS curve is split into several NURBS sub-curves or blocks by the critical points. A bidirectional scanning strategy with the limitations of chord error, normal/tangential acceleration/jerk and command feed rate is employed to make the feed rate at the junctions between different NURBS blocks continuous. To improve the efficiency of the feed rate scheduling, the NURBS block is classified into three types: short block, medium block and long block. The feed rate profile corresponding to each NURBS block is generated according to the start/end feed rates and the arc length of the block and the limitations of tangential acceleration/jerk. In addition, two compensation strategies are proposed to make the feed rate more continuous and the arc increment more precise. Once the feed rate profile is determined, a second-order Taylor's expansion interpolation method is applied to generate the position commands. Finally, experiments with two free-form NURBS curves are conducted to verify the applicability and accuracy of the proposed method.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.1
• /
• pp.19-30
• /
• 2017

In this study, the quality characteristics of noodles containing different amounts of germinated black quinoa were investigated. The powder of black quinoa with the highest antioxidative activation was selected; and composite flour was prepared with 0%, 5%, 10%, 15%, and 20% of germinated black quinoa powder to produce the noodles. We evaluated the quality and sensory characteristics of the noodles, including pH, salinity, water absorption rate, volumetric expansion rate, turbidity, chromaticity, extensibility, and texture. With regards to the quality characteristics of noodles with added germinated black quinoa, the pH and salinity decreased with increasing percentage of added germinated black quinoa (p<0.001). Increasing the percentage of added germinated black quinoa resulted in decreased water absorption (p<0.01) and volumetric expansion rates and increased turbidity of the cooked noodles (p<0.001). In terms of the chromaticity, L and b values decreased and a value increased with the increasing percentage of added germinated black quinoa (p<0.001). For the texture, hardness (p<0.001), adhesiveness (p<0.01), springiness (p<0.01), chewiness (p<0.001), gumminess (p<0.001), and cohesiveness (p<0.05) decreased as the percentage of added germinated black quinoa increased; while extensibility (p<0.001) increased. Consumer testing results indicated that the noodles with 15% of added germinated black quinoa showed the best results. Collectively, the evaluation of quality characteristics and consumer acceptability indicated that adding 15% of germinated black quinoa to produce noodles is optimal.