• 분석과학
• /
• 제8권4호
• /
• pp.877-880
• /
• 1995

The determination of fluoride and the nutritious calcium in infusion of teas are explained. Tea leaves were pulverized and were immersed in boiling water. The solution was filtered and fluoride, calcium and oxalic acid were determined by the ion chromatography. The quantities of fluoride, calcium and oxalate ions extracted from 100 g of tea leaves were calculated. Tea leaves were also immersed in 0.5 M hydrochloric acid and extracted oxalate and calcium ions were analyzed. The free oxalic acid and calcium were extracted in boiling water and the total ones were extracted in hydrochloric acid. The quantity of calcium oxalate was calculated from the total and the free oxalic acids. The free calcium was estimated to be nutritious.

• Journal of Ship and Ocean Technology
• /
• 제6권1호
• /
• pp.1-15
• /
• 2002

A new concept for launching free-fall lifeboats, proposed by Yokohama National University is described in this paper. It has been pointed out that, using the conventional single-skid free-fall system, the potential for dangerous lifeboat motions (in which the lifeboat moves backward or jerks on the surface after entering the water) increases with the fall height of the lifeboat. One of the principal causes of this undesirable motion is vertical rotation of the lifeboat during its restricted fall at the edge of the launching skid. Thus a new "double-skid"launching concept is proposed to effectively eliminate the rotation of the lifeboat at the skid end and to enable the lifeboat to move smoothly after entering the water. In order to evaluate the performance of the proposed method, a series of model experiments and numerical simulations is carried out in which two lifeboat models with overall lengths of 1 meter and 6 meters are used. The effects of design parameters such as skid angle and skid height are investigated, and an example of the implementation of this new system at the stern of a large merchant ship is illustrated.

• 동의생리병리학회지
• /
• 제20권1호
• /
• pp.76-82
• /
• 2006

This study was purposed to investigated the antioxidant effects of water (VLWS) and aqua-acupuncture solution (VLAS) from root of Vitis labrusca. VLWS and VLAS was were assessed to determine the mechanisms of its antioxidant activities. The VLWS and VLAS exhibitde a concentration-dependent inhibition of DPPH free radicals. This VLWS-mediated antioxidant activity was similar to that L-ascorbic acid (vitamin C). In addition, the VLWS and VLAS showed dose-dependent free radical scavenging activity, including superoxide anions and hydroxyl radicals, using different assay systems. The VLWS and VLAS were also found to be strongly inhibited linoleic acid oxidation in a ferric thiocyanate assay (FTC) system. Finally, the VLWS and VLAS significantly prevented Fenton's reagent-induced DNA nicking.

• Bulletin of the Korean Chemical Society
• /
• 제4권3호
• /
• pp.133-139
• /
• 1983

To understand the importance of Y-base adjacent to the anticodon stabilizing codon-anticodon interaction, a study has been undertaken for the model compound involving the interaction between Y-base and anticodon as well as the participation of water molecule by calculating the conformational free energy using an empirical potential function. We restrict our analysis to sites directly associated with Y-base by varying only the backbone torsion angles of Y-base. The hydration and $Mg^{+2}$ binding effects on the conformational stability of Y-base are calculated and discussed. The free Y-base is proved to be less stable than the hydrated one. The free energy change due to the hydration of Y-base amounts to -119.5 kcal/mole, in which the conformational energy change is -142.4 kcal/mole and the configurational entropy change is -76.9 e. u. It is found that the water molecules bound to Y-base and $Mg^{+2}$ contribute to the conformation of Y-base dominantly.

• 산업기술연구
• /
• 제21권B호
• /
• pp.11-20
• /
• 2001

This laboratory study examined the impact of free chlorine residual and pipe material on the formation of biofilm in drinking water distribution pipe surfaces. Result of heterotrophic plate counts(HPC) of the biofilm in the tap water-supplied reactor averaged $2.17{\times}10^5CFU/cm^2$ on PVC and $2.43{\times}10^5CFU/cm^2$ on STS 316, respectively. HPCs on the surface exposed to the tap water containing 0.2mg/L of free chlorinne residual averaged $4.24{\times}10^4CFU/cm^2$ on PVC and $6.54{\times}10^4CFU/cm^2$ on STS 316, respectively. Average of HPC/Total direct counts in the tap water-supplied reactor ranged from 1.08%(PVC) to 1.26%(STS 316) and from 0.38%(PVC) to 0.65%(STS 316) in the reactor supplemented with disinfectant, respectively. No correlation was observed between disinfectant addition and biofilm density. With regard to the biofilm formation, little difference existed between PVC and STS 316. Yellow and red pigmented bacteria were the dominant expressions in bulk fluid, whereas non-pigmented bacteria were found dominant in the biofilm. Pink/red pigmented bacteria were found to be facultative anaerobic, while yellow pigmented bacteria and non-pigmented bacteria were found to be obligate aerobic.

• 한국환경복원기술학회지
• /
• 제13권1호
• /
• pp.82-92
• /
• 2010

Removal rates of NO3-N and TN in a free water surface wetland system during emergent plant growing season and non-growing were investigated. The system was established on floodplain in the down reach of the Gwangju Stream in 2008. Its dimensions were 46 meters in length and 5 meters in width. Typha angustifloria L. growing in pots about two years were planted on the half area of the system and Zizania latifolia Turcz on the other half. Water of the stream was funneled into it by gravity flow and its effluent was discharged back into it. Volumes and water quality of inflow and outflow were analyzed from October 2008 to September 2009. Inflow into the system averaged approximately 715 $m^3$/day and hydraulic residence time was about 1.5 hr. Average influent and effluent $NO_3$-N concentration was 3.37 and 2.74 mg/L, respectively and $NO_3$-N retention amounted to 18.7%. Influent and effluent TN concentration averaged 4.67 and 3.69 mg/L, respectively and TN abatement reached to 20.9%. $NO_3$-N removal rate (%) during plant growing season ($22.67{\pm}3.70$, mean ${\pm}$ standard error) was significantly high (p<0.001) when compared with that during plant non-growing one ($15.02{\pm}3.23$). TN abatement rate (%) during plant growing season ($27.42{\pm}5.98$) was also significantly high (p<0.001) when compared with that during plant non-growing one ($13.66{\pm}3.08$).

• Journal of Dairy Science and Biotechnology
• /
• 제39권4호
• /
• pp.157-165
• /
• 2021

This study aimed to determine the effect of extraction temperature and time on the antioxidant activity of hot water extract from Panax ginseng sprout powder and to evaluate the suitability of this extract for use in dairy products. Water-soluble fractions of commercial Panax ginseng sprout powder were obtained by hot water extraction at 25, 60, or 80℃ for 0.5, 2, 12, or 24 h. The antioxidant activity of each extract was evaluated by measuring its free radical scavenging activity against 2,2-diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS). DPPH and ABTS free radical scavenging activity increased with extraction temperature from 25 to 80℃. At 80℃, increasing the extraction time from 0.5 to 2 h led to increases in DPPH and ABTS free radical scavenging activity. Thus, the extract obtained under 2 h at 80℃ was selected for addition to milk and yogurt. After 16 days of storage, there were no significant changes in the pH of the milk or the antioxidant activity of the extract. With regard to yogurt fermentation, adding the extract did not affect the pH or the number of viable lactic acid bacteria. In conclusion, hot water extract from Panax ginseng sprout powder can be added to dairy products to enhance antioxidant activity.

• 대한조선학회논문집
• /
• 제30권2호
• /
• pp.98-111
• /
• 1993

2차원 비정상 비선형 자유표면파를 해석하고 자유표면파에서의 점성효과를 관찰하였다. 유동장내의 Navier-Stokes 방정식과 연속방정식을 풀기 위해 유한해석법을 적용하였고, 자유표면의 처리를 위해 MAC 기법을 적용하였다. 그리고, 자유표면에서는 표면장력을 고려한 경계조건을 적용하였으며, 층류에 대한 점성효과만을 고려하였다. 계산모델은 천수역에서의 점성영향, 자유표면 근처에서의 보오텍스 쌍(vortex-pair)의 거동 및 전진하는 부유체 앞에서의 자유표면파문제 등이다. 천수역문제에서는 바닥과의 마찰에 기인한 자유표면파의 변화를 고찰하였으며, 특히 고립파에 대한 적용으로서 파고의 감소정도, 수직벽면에서의 파상승(wave run-up) 및 수심의 변화로 인한 유장변화 등을 살펴보았다. 보오텍스 문제에서는 보오텍스의 이동에 따른 자유표면주위의 유동변화를 관찰하였으며, 사각부유체 주위의 유동문제에서는 전진속도의 차이에 따른 자유표면파의 차이 및 물체주위의 유동특성을 관찰하였다.

• 대한조선학회논문집
• /
• 제51권1호
• /
• pp.58-66
• /
• 2014

Numerical simulations for the flows containing free surface remain difficult problems because the drastic differences of physical properties of water and air, The difference of densities makes the solution instable in particular. For the stabilities of the solutions, the most typical methods to simulate free surface flows, such as Volume Of Fluid(VOF) and Level-Set(LS) methods, impose transient zones where the physical prosperities are continuously distributed. The thickness of the transient zone is the source of the numerical errors. The other side, marker-density method does not use such a transient zone. In the traditional marker-density method, however, the air velocities of free surface cells are extrapolated from the water velocity, and the pressures on the free surface are extrapolated from the air pressures for the stability of the solution. In this study, the marker-density method is modified for the decrease of such numerical errors. That is, the pressure on the free surface is determined to coincide with the pressure gradient terms of the governing equations, and the velocity of free surface cells are calculated with the governing equations. Two-dimensional steady spilling breakers behind of a submersed hydrofoil and three-dimensional spilling breaker near a wedge shaped ship model are simulated using INHAWAVE-II including the modified marker-density(MMD) method. The results are compared with the results of Fluent V6.3 including VOF method and several published research results.

• 한국분무공학회지
• /
• 제8권1호
• /
• pp.29-36
• /
• 2003

Spray characteristics on diesel- water emulsion are analyzed in high pressure injection for several variables such as water content, injection pressure. Spray Patterns were visualized under various water content and injection pressures. Spray tip penetration was increased and spray angle decreased in accordance with increasing of water content. But these characteristics were enhanced with increase of injection pressure to high pressure.