• 설비공학논문집
• /
• 제14권4호
• /
• pp.332-340
• /
• 2002

In these days, environmental concerns have been increased throughout the industry and community worldwide. To prevent the ozone depletion, ozone depletion potential of a refrigerant must be zero. Simultaneously, a refrigerant with low GWP (global warming potential) is very demanding to induce green house effect. Chlorine-free HFC-l34a is a refrigerant widely used for automotive air-conditioning system because its destruction potential is ecologically zero. Although HFC-l34a has no ozone depletion potential, its global warming potential is so high that it is not considered as a perfect alternative refrigerant that is acceptable for long-term use. In this paper, experimental measurement has been carried out to analyze the performance characteristics of automotive air-conditioning system using HFC-152a, which has low GWP and zero ODP. Also mixed refrigerant that is composed of HFC-152a and $CF_3$ was applied to investigate an alternative possibility for the automotive airconditioning system. As a result of this study, we could draw following conclusions; With respect to the variation of the rotational speed of compressor, outside air temperature and flow rate, the heat amount of evaporator and compressor and performance coefficient was varied.

• 한국재료학회지
• /
• 제22권1호
• /
• pp.8-15
• /
• 2012

Silicon-based thin film was prepared at room temperature by an electrochemical deposition method and a feasibility study was conducted for its use as an anode material in a rechargeable lithium battery. The growth of the electrodeposits was mainly concentrated on the surface defects of the Cu substrate while that growth was trivial on the defect-free surface region. Intentional formation of random defects on the substrate by chemical etching led to uniform formation of deposits throughout the surface. The morphology of the electrodeposits reflected first the roughened surface of the substrate, but it became flattened as the deposition time increased, due primarily to the concentration of reduction current on the convex region of the deposits. The electrodeposits proved to be amorphous and to contain chlorine and carbon, together with silicon, indicating that the electrolyte is captured in the deposits during the fabrication process. The silicon in the deposits readily reacted with lithium, but thick deposits resulted in significant reaction overvoltage. The charge efficiency of oxidation (lithiation) to reduction (delithiation) was higher in the relatively thick deposit. This abnormal behavior needs to clarified in view of the thickness dependence of the internal residual stress and the relaxation tendency of the reaction-induced stress due to the porous structure of the deposits and the deposit components other than silicon.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제11권3호
• /
• pp.140-149
• /
• 2003

In these days, environmental concerns have been increased throughout the industry and community worldwide. To prevent the ozone depletion, ozone depletion potential of a refrigerant must be zero. Simultaneously, a refrigerant with low GWP (global warming potential) is very demanding to reduce green house effect. Chlorine-free HFC-l34a is a refrigerant widely used for automotive air-conditioning system because its destruction potential is ecologically zero. Although HFC-l34a has no ozone depletion potential, its global warming potential is so high that it is not considered as a perfect alternative refrigerant that is acceptable for long-term use. In this paper, experimental measurement has been carried out to analyze the performance characteristics of automotive air-conditioning system using HFC-152a, which has low GWP and zero ODP. Also mixed refrigerant that is composed of HFC-152a and $CF_3$ was applied to investigate an alternative possibility for the automotive air-conditioning system. As a result of this study, we could draw following conclusions; With respect to the variation of the rotational speed of compressor, outside air temperature and flow rate, the heat amount of evaporator and compressor and performance coefficient was varied.

• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.43-48
• /
• 2006

Electrolytic water(EW), studied in recent decades in the Japan, Russia and United State of America, have shown promise as a method of disinfection whereby low levels of free chlorine, sodium hypochlorite, or hypochlorous acid may be produced in situ in Nacl-containing solution. These methods have shown promise in destruction of microorganisms in medical, dental environment, and in the agriculture and food industry. A recently EW treatment system was evaluated for reducing scouring agent and other surfactants in the washing and scouring process of textile industry Unfortunately, there is, to my knowledge, no serious studies of the properties of EW for textile industry In order to study the characteristics of EW and confirm the possibility of applications in textile industry processes, the pH, surface activity, penetration force, surface tension, and contact angle of EW was measured under various conditions. In general terms, What all this shows is that there is fundamental difference between the properties of EW and that of distilled water.

• 상하수도학회지
• /
• 제14권4호
• /
• pp.328-336
• /
• 2000

In order to compare the effect of water quality on two service systems, tank and direct connection service, we selected randomly 30 rooftop tanks installed in the buildings with five or fewer floors, and collected water samples from each tank as well as tap water by direct service. At the same time each tank was investigated on their cleanliness and sanitary control. 30 water samples from direct service met Korean Drinking water quality standard. But 5 tank water samples(17%) were not able to meet Coliform or Total Colony Counts standard and free chlorine of 12 tank water samples(40%) were less than 0.2mg/L. Also Fe, Turbidity, TOC, Total Algae in tank water were higher than tap water on direct service. We concluded that thorough health control of water tank is necessary and conversion into direct connection service results in improving tap water quality importantly.

• 한국유체기계학회 논문집
• /
• 제20권2호
• /
• pp.69-74
• /
• 2017

Sodium hypochlorite, used as water disinfectant, is generated by electrolysis of salt. Compared to chlorine gas disinfection, it is free from high-pressure gas regulation and does not generate toxic gas, so it is increasingly used as a safe disinfectant. Despite these advantages, the concentration of sodium hypochlorite decreases with temperature during long-term storage, and the amount of chlorate increases when a large amount is added, it has mainly been applied to small-scale waterworks. To solve this problem, high sodium hypochlorite generation was developed. In this study, the changes of concentration and chlorate of sodium hypochlorite with time has been studied. As a result of the test, it was found that the usable period of sodium hypochlorite produced at a certain temperature or less was increased from 1.5 days to 13 days. Overall, sodium hypochlorite can be applied even in large-scale waterworks, which makes operation more stable and also reduces the disinfection byproducts, thus it contributed greatly to securing water quality.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.153-160
• /
• 2018

An environmentally favorable (chlorine-free) solid oxidizer, guanidinium dinitramide [GDN; $NH_2C(NH_2)NH_2N(NO_2)_2$], was newly synthesized from guanidine carbonate [$NH_2C(=NH)NH_2{\cdot}1/2H_2CO_3$]. Two different crystalline forms (${\alpha}-type$ and ${\beta}-type$) appeared according to the applied solvents and synthesis conditions. Moisture, during extraction, might become trapped in a crystal between inner molecules. Therefore, despite having the same chemical composition, Raman-IR and TGA-DSC revealed different physical characteristics of the two forms. Peaks of Raman shift near $1000cm^{-1}$ implied different chemical structures. Thermal analysis revealed an exothermic temperature $155.7^{\circ}C$ for ${\alpha}-type$ but one of $191.6^{\circ}C$ for ${\beta}-type$. The caloric value of ${\alpha}-type$ was 536.4 J/g, which was 2.5 times larger than that of the ${\beta}-type$, which was 1310 J/g. While the synthesized GDN of ${\alpha}-type$ showed a steep exothermic decomposition, the ${\beta}-type$ was slowly decomposed after melting through an endothermic process. This work implied that despite of the same molecular formula some different core thermal properties would appear depending on synthesis conditions.

• 한국환경과학회지
• /
• 제30권7호
• /
• pp.537-545
• /
• 2021

This study aimed to investigate the improvement effect of 5% (w/w) mung bean (Phaseolus aureus L.) on lipid composition and protein concentration in hyperlipidemic rats. Seven-week-old male (Sprague-Dawley) rats were divided into four groups (n=6, each), and fed experimental diets containing mung bean meal [basal diet+5% (w/w) mung bean (BM), basal-hyperlipidemic diet+5% (w/w) mung bean (BHM)], basal-hyperlipidemic diet (BH), and control (basal diet, BD). Lipid composition in the mung bean diet groups (BM and BHM) evidenced significant reductions in serum total cholesterol, low-density lipoprotein cholesterol, atherosclerotic index, cardiac risk factor, triglyceride, phospholipid, free cholesterol, cholesteryl ester, blood glucose, nonesterified fatty acid, and an elevation in high-density lipoprotein cholesterol. The serum albumin/globulin ratio was increased in mung bean diet-supplemented rats compared to that in hyperlipidemic rats (p < 0.05). Total calcium, phosphorus and potassium concentrations in sera were higher in the BM, BHM and BD groups than in the BH group. Concentrations of sodium and chlorine in sera were lower in the mung bean diet-supplemented groups than in the hyperlipidemic group. The in vivo experiments showed that ingestion of mung bean was effective in improving lipid composition, protein concentration, and blood glucose.

• 한국식품저장유통학회지
• /
• 제21권4호
• /
• pp.468-472
• /
• 2014

'신고' 배에서 저장 전 몇 가지를 처리하여 배과피얼룩과 발생에 미치는 영향을 조사하였다. 2중 봉지 속지색에 따른 배과피얼룩과 발생은 황색지가 청색지 및 적색지에 비하여 현저하게 낮은 발생률을 보였다. 수확 시기별로는 적숙기 보다 7일 전에 수확하여 저온 저장한 처리가 발병률이 낮았으며 과실 품질에는 차이가 없었다. 저장방법에서 칼슘코팅봉지에 넣어 저장한 과실이 PE 봉지 및 알배로 저장한 과실에 비하여 현저하게 발생률이 높았다. 이산화염소 및 칼슘액 침지처리는 무처리 및 증류수 처리에 비하여 발생률이 낮았다. 또한 NaDCC 1,500배액에 침지처리를 하면 발생률이 낮았으며 반점의 크기도 감소되었다. 저장 중 과피얼룩과 발생은 과피의 수분함량(67.7%)이 낮은 과실은 나타나지 않았다. 따라서 적숙기 보다 7일 전에 수확하여 칼슘봉지 씌우기 및 이산화염소, 칼슘용액, NaDCC 침지는 저장중 배과피얼룩과 발생을 줄일 수 있을 것으로 생각되었다.

• 자원리싸이클링
• /
• 제18권2호
• /
• pp.16-29
• /
• 2009

본고는 펄프 제지산업 폐수에 함유된 오염물질들의 특성과 생물학적 처리기술들에 대해 설명한다. 펄프 제지산업 폐수는 고농도의 생화학적 산소요구량 (BOD)과 화학적 산소요구량 (COD)을 포함하고 높은 독성을 보이며 강한 흑갈색을 띠는 것이 특징이다. 특히, 펄프의 표백공정에서 리그닌의 염소화에 의해 다이옥신, 퓨란과 같은 독성의 유기염소화합물이 형성된다는 것이 알려져있다. 이에 따라 최근 펄프 제지산업은 기존의 표백처리를 무염소공정(TCF)으로 대체하고 있다. 펄프 제지산업 폐수처리에 사용되는 모든 생물학적 기술들은 폐수와 박테리아의 접촉 메커니즘에 기반을 두고 있는데, 이것은 박테리아가 폐수 내 유기물질을 먹이로 이용하여 세포로 전환함으로써 폐수 내 BOD농도를 감소시키는 것이다. 펄프 제지산업 폐수의 생물학적 처리에서 호기성 처리와 혐기성 처리 모두 효과적인 것으로 밝혀졌다. 뿐만 아니라, 최근 곰팡이류를 이용한 생물학적 처리, 생물-응집-여과기법을 혼용한 처리 등도 폐수처리분야에 새롭게 적용되었다. 이러한 기술들로 처리된 폐수를 펄프 제지공정에 재활용함으로써 제조공정의 물소비량을 상당히 감소시킬 수 있다.