• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.242-247
• /
• 2012

In the determination of suitable frame sizes associated with dynamic framed slotted Aloha used in radio frequency identification tag identification processes, the widely imposed constraint $L=2^Q$ often yields inappropriate values deviating far from the optimal values, while a straightforward use of the estimated optimal frame sizes causes frequent restarts of read procedures, both resulting in long identification delays. Taking a trade-off, in this paper, we propose a new method for determining effective frame sizes where the effective frame size changes in a multiple of a predetermined step size, namely ${\Delta}$. Through computer simulations, we show that the proposed scheme works fairly well in terms of identification delay.

• Journal of the Optical Society of Korea
• /
• v.19 no.5
• /
• pp.537-543
• /
• 2015

Liquid crystal displays (LCDs) have slow responses, so motion blurs are often perceived in fast moving scenes. To reduce this motion blur, we propose a novel method of robust motion compensated frame interpolation (MCFI) based on bidirectional motion estimation (BME) and weight-overlapped block motion compensation (WOBMC) with variable block sizes. In most MCFI methods, a static block size is used, so some block artefacts and motion blurs are observed. However, the proposed method adjusts motion block sizes and search ranges by comparing matching scores, so the precise motion vectors can be estimated in accordance with motions. In the MCFI, overlapping ranges for WOBMC are also determined by adjusted block sizes, so the accurate MCFI can be performed. In the experimental results, the proposed method strongly reduced motion blurs arisen from large motions, and yielded interpolated images with high visual performance and peak signal-to-noise ratio (PSNR).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.7A
• /
• pp.1046-1051
• /
• 1999

It is well known that Parallel Concatenated Convolutional Codes(turbo codes) has a good performance for long block sizes. This thesis has analyzed the performance of turbo code which is based on voice or control frames with short frame sizes in the future mobile communication system. Also, at the similar decoding complexity, the performance of turbo code and convolutional codes in the speech/control frames, and the applicability of this system are considered. As a result, turbo code in short frame sizes present the performance of a BER of $10^{-3}$ or more over 3 iterations in the future mobile communication system. However, at a BER of $10^{-3}$ , if the same complexity is considered, the performance of rate 1/2 turbo code with K = 5 is better than that of convolutional code with K = 9 at low $E_b/N_0$, and the performance of turbo code with K = 3 is superior to that of convolutional code with K = 7. Rate 1/3 turbo code with K = 3 and 5 have similar to performance of rate 1/2 turbo code.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.110-116
• /
• 2002

In this paper, various kinds of A-Frame are surveyed and classified according to their functional ability and sizes. Based on the study, a A-Frame that is suitable for ROV/AUV operation is designed. Basic theoretical structural requirements are applied and relevant Finite Element Analysis are carried out for the verification of the sound workability of the proposed A-Frame. Final configuration and the specification are proposed for the usage of ROV/AUV operation.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.186-190
• /
• 2002

In this paper, various kinds of A-Frame are surveyed and classified according to their functional ability and sizes. Based on the study, a A-Frame that is suitable for ROV/AUV operation is designed. Basic theoretical structural requirements are applied and relevant Finite Element Analysis are earned out for the verification of the sound workability of the proposed A-Frame. Final configuration and the specification are proposed for the usage of ROV/AUV operation.

• Journal of architectural history
• /
• v.19 no.5
• /
• pp.25-47
• /
• 2010

The purpose of this study is to reconstruct the wooden frame structure of Buddhist temple, Kumdang in Youngamsaji which assumed to be built in the 9th century of Unified Silla Dynasty. The remaining site of Kumdang in Youngamsaji is investigated thoroughly with a particular attention to bay size and column distribution. The five ancient Buddhist temples which were built in the same period also have the same frame type as Youngamsaji Kumdang. These five ancient Buddhist temples and Kumdang in Youngamsaji are meticulously investigated in terms of their bay sizes and measuring modules. The framework schema is devised as a conceptual tool to conjecture wooden frame structures of Buddhist temple. A theoretical differentiation between frame type and frame structure is attempted to formulated a wooden frame structure as a stepping-stone for the reconstruction of traditional wooden building. The wooden frame structure of 9C Kumdang in Youngamsaji mainly follows the oldest Korean wooden pavilion, Muryangsujeon in Busuk temple, with a hip and gable roof. The wooden frame structure of 9C Kumdang in Youngamsaji is reconstructed through 3D computer modeling to such an extent that every wooden components of the structure can be 3D printed. The reconstruction also takes reference from the Cai-Fen system in Yingzao Fashi.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.61-64
• /
• 1999

The turbo code appropriate to IMT-2000 is known to have a good performance whenever the size of frame increases. But it is not appropriate to a sort of video service to need real time because of decoding complexity and long delay time by the size of frame. Therefore this paper proposes decoding decision algorithm of short frame in which soft output is weighted according to iteration number in turbo decoder. Performance of the proposed algorithm is analysed in the AWGN channel when short length of frame is 100, 256, 640. As the result. it is appeared that the proposed decoding decision algorithm has improved in BER other than in the existing MAP decoding algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.384-389
• /
• 2005

The objective on this project is to develop a cooperative Field Robot (FR), by using a customize Open Control Platform (OCP) as design and development process. An OCP is a CORBA-based solution for networked control system, which facilitates the transitioning of control designs to embedded targets. In order to achieve the cooperation surveillance system, two FRs are distributed by navigation messages (GPS and sensor data) using CORBA event-channel communication, while graphical information from IR night vision camera is distributed using CORBA Asynchronous Method Invocation (AMI). The QoS features of AMI in the network are to provide the additional delivery method for distributing an IR camera Images will be evaluate in this experiment. In this paper also presents an empirical performance evaluation from the variable chunk sizes were compared with the number of clients and message latency, some of the measurement data's are summarized in the following paragraph. In the AMI buffers size measurement, when the chuck sizes were change, the message latency is significantly change according to it frame size. The smaller frame size between 256 bytes to 512 bytes is more efficient fur the message size below 2Mbytes, but it average performance in the large of message size a bigger frame size is more efficient. For the several destination, the same experiment using 512 bytes to 2 Mbytes frame with 2 to 5 destinations are presented. For the message size bigger than 2Mbytes, the AMI are still able to meet requirement far more than 5 clients simultaneously.

• Journal of Mechanical Science and Technology
• /
• v.18 no.7
• /
• pp.1236-1245
• /
• 2004

In this study, an optical imaging method was developed for the measurements of the sizes and velocities of droplets in sprays. Double-exposure single-frame spray images were captured by the imaging system. An image processing program was developed for the measurements of the sizes and positions of individual particles including separation of the overlapped particles and particle tracking and pairing at two time instants. To recognize and separate overlapping particles, the morphological method based on watershed segmentation as well as separation using the perimeter and convex hull of image was used consecutively. Better results in separation were obtained by utilization of both methods especially for the multiple or heavily-overlapped particles. The match probability method was adopted for particle tracking and pairing after identifying the positions of individual particles and it produced good matching results even for large particles like droplets in sprays. Therefore, the developed optical imaging method could provide a reliable way of analyzing the motion and size distribution of droplets produced by various sprays and atomization devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1066-1072
• /
• 2007

In this paper, we propose a fast multiple reference frame selection method for motion estimation and compensation in video coding. Reference frames selected as an optimal reference frame by variable block sizes motion estimation have the statistical characteristic that was based on block size. Using the statistical characteristic, reference frames for smaller block size motion estimation can be selected from reference frame which was decided as an optimal one for the upper layer block size. Simulation results show that the proposal method decreased the computations about 60%. Nevertheless, PSNR and bit rate were almost same as the performances of original H.264 multiple reference motion estimation.