• Steel and Composite Structures
• /
• 제48권3호
• /
• pp.321-333
• /
• 2023

This paper proposes a comprehensive investigation on lateral stiffness of corner-supported steel modular frame using splice connection. A full-scale modular frame with two stacked steel modules under lateral load is tested. Ductile pattern in the transfer of lateral load is found in the final failure mode. Two types of lateral stiffness, including tangent stiffness and secant stiffness, are defined from the load-displacement due to the observed nonlinearity. The difference between these two types of stiffness is found around 20%. The comparisons between the experimental lateral stiffness and the predictions of classical methods are also conducted. The D-value method using hypothesis of independent case is a conservative option for predicting lateral stiffness, which is more recommended than method of contraflexural bending moment. Analyses on two classical short-rod models, including fix-rod model and pin-rod model, are further conducted. Results indicate that fix-rod model is more recommended than pin-rod model to simplify splice connection for simulation on lateral stiffness of modular frame in elastic design stage.

• 한국방사선학회논문지
• /
• 제15권6호
• /
• pp.891-897
• /
• 2021

핵의학은 방사성 동위원소 추적자를 인체에 투여하여 질병의 형태학적 정보와 생물학적 기능 정보를 얻고 평가한 Amyloid PET Tracer 개발로 베타아밀로이드 신경반 확인을 통해서 알츠하이머 진단의 정확도를 높일 수 있다. 그러나 20분이라는 긴 영상획득 시간은 환자에게 힘든 시간 일 수 있다. PET/CT 검사는 환자의 움직임에 민감하며, 검사 결과에도 일부분 영향을 미칠 수 있다. 이에 본 연구에서는 체내 방사성 의약품의 분포를 시간에 따른 list mode acquisition 방법을 통해 영상의 정량적 평가에 영향을 미치지 않으면서 적절한 영상획득 시간 연구하였다. list mode는 기존의 frame mode에 비해 시간에 대한 정보가 포함되어 연구자들이 원하는 시간에 대한 영상을 별도로 reconstruction 할 수 있어 data 분석에 용이하다. 연구 방법은 5 min frame/bed, 10 min frame/bed, 15 min frame/bed, 20 min frame/bed 로 리스트 모드를 이용하여 시간별 재구성 영상을 획득하여 SNR(signal to noise ratio) 과 LPR(lesion-to-pons uptake ratio)의 차이와 판독의 차이를 비교 분석하여 적정한 영상획득시간을 알아보고자 하였다. 정량적 분석 결과 list mode로 측정 시 정량적 평가 결과, 영상획득 시간이 증가함에 따라 관심 영역 6개에서 SUVmean 값은 감소하였으나 5 min/bed 영상에서 가장 많은 차이를 보였고 10 min/bed 그리고 15 min/bed 순으로 SUVmean 값의 차이가 감소하였다. 따라서 15 min/bed 에서의 SUVmean 값은 영상의 평가에 영향을 끼치지 않을 만큼의 차이가 없다는 결과값이 나왔다. LPR 값의 차이는 없었다. 정성적 분석 결과, PET 영상획득시간에 따른 판독 소견의 변화는 없었으며 시간에 따른 영상 재구성의 정성적 분석 점수의 유의한 차이가 없었다. 연구 결과 F-18 fluteme tamol PET/CT 검사 시 15 min/bed 과 20 min/bed 영상이 유의한 차이가 없으므로 환자의 상태에 따라 LIST MODE를 통해 선택적으로 15 min/bed 을 사용하여 영상획득 시간을 줄이는 것이 임상적으로 유용하다고 할 수 있다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.419-420
• /
• 2006

In the new video coding standard H.264/AVC, motion estimation (ME) is allowed to search multiple reference frames for improve the rate-distortion performance. The complexity of multi-frame motion estimation increases linearly with the number of used reference frame. However, the distortion gain given by each reference frame varies with the video sequence, and it is not efficient to search through all the candidate frames. In this paper, we propose a fast mult-frame selection method using all zero coefficient block (AZCB) prediction and sum of difference (SAD) of neighbor block. Simulation results show that the speed of the proposed algorithm is up to two times faster than exhaustive search of multiple reference frames with similar quality and bit-rate.

• 전자공학회논문지B
• /
• 제31B권4호
• /
• pp.62-76
• /
• 1994

In this paper, a segmentation-based coding technique as applied to video sequences is proposed. A proposed method separates an image into contour and texture parts, then the visually-sensitive contour part is represented by chain codes and the visually-insensitive texture part is reconstructed by a representative motion vector of a region and mean of the segmented frame difference. It uses a change detector to find moving areas and adopts variable blocks to represent different motions correctly. For better quality of reconstructed images, the displaced frame difference between the original image and the motion compensated image reconstructed by the representative motion vector is segmented. Computer simulation with several video sequences shows that the proposed method gives better performance than the conventional ones in terms of the peak signal to noise ratio(PSNR) and compression ration.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1803-1806
• /
• 2002

This paper describes an effective technique for lossless inter-frame video coding sequences based on a JPEG2000 CODEC. This technique has diminished the compression rate for lossless video coding. In this proposed method, firstly a predicted image for an in- put image is generated by motion estimation(ME), and then a difference image between the input image and the predicted image is calculated, and finally the difference image becomes an input image to a JPEG2000 encoder for lossless coding. Simulation results show the effectiveness of this method.

• 방송공학회논문지
• /
• 제27권6호
• /
• pp.897-905
• /
• 2022

비디오 영상 내 주요 프레임(Key Frame) 검출은 컴퓨터 비전 분야에서 꾸준히 연구되고 있는 분야 중 하나이다. 최근 심층학습(Deep Learning) 기술의 발전으로 비디오 영상에서의 주요 프레임 검출 성능이 향상 되었으나, 다양한 종류의 영상 콘텐츠 및 복잡한 배경으로 인해 여전히 효과적인 학습이 어려운 문제점이 있다. 본 논문에서는 대조적 학습(Contrastive Learning)과 메모리 뱅크(Memory Bank)를 통해 영상의 주요 프레임을 검출하는 새로운 방법을 제안한다. 제안하는 방법은 입력 프레임과 같은 영상 내 이웃하는 프레임 간 차이와 다른 영상 내 프레임과의 차이를 기반으로 특징 추출 신경망을 학습한다. 이와 같은 대조적 학습을 통해 메모리 뱅크에 주요 프레임을 저장 및 갱신하여 영상의 중복성을 효과적으로 제거한다. 비디오 영상 데이터셋에서의 실험 결과를 통해 제안하는 방법의 성능을 검증하였다.

• 소성∙가공
• /
• 제7권3호
• /
• pp.260-273
• /
• 1998

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between final deformed shaped and target contour shape into account. Based on the method a computer program composed of blank design module FE-analysis program and mesh generation module is developed. The rollback method is applied to square cup drawing process with the flange of unifiorm size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary square blank after three modification. Good agreements are recognized between the numerical results and the published results for initial blank shape and thickness strain distribution. The optimum blank shape for two parts of automobile sub-frame is designed, The thickness distribution and the level of punch load is improved. Also the method is applied to design the weld line in the tailor-welded blank. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.185-195
• /
• 1998

A new blank design method is proposed to predict the optimum initial blank shape in the sheet metal forming process. The rollback method for blank shape design takes the difference between final deformed shape and target contour shape into account. Based on the method, a computer program composed of blank design module, FE-analysis program and mesh generation module is developed. The rollback method is applied to square cup drawing process with the flange of unifiorm size around its periphery to confirm its validity. The optimum initial blank shape is obtained from an arbitrary square blank after three modifications. Good agreements are recognized between the numerical results and the published results for initial blank shape and thickness strain distribution. The optimum blank shape for two parts of automobile sub-frame is designed. The thickness distribution and the level of punch load is improved. Also, the method is applied to design the weld line in the tailor-welded blank. It is concluded that the rollback method is an effective and convenient method for an optimum blank shape design.

• 한국통신학회논문지
• /
• 제22권7호
• /
• pp.1487-1504
• /
• 1997

In this paper, the two-stage variable block-size multiresolution motion algorithm is proposed for an interframe coding scheme in the wavelet decomposition. An optimal bit allocagion between motion vectors and the prediction error in sense of minimizing the total bit rate is obtained by the proposed algorithm. The proposed algorithm consists of two stages for motion estimatation and only the first stage can be separated and run on its own. The first stage of the algorithm introduces a new method to give the lower bit rate of the displaced frame difference as well as a smooth motion field. In the second stage of the algorithm, the technique is introduced to have more accurate motion vectors in detailed areas, and to decrease the number of motion vectors in uniform areas. The algorithm aims at minimizin gthe total bit rate which is sum of the motion vectors and the displaced frame difference. The optimal bit allocation between motion vectors and displaced frame difference is accomplished by reducing the number of motion vectors in uniform areas and it is based on a botom-up construction of a quadtree. An entropy criterion aims at the control of merge operation. Simulation resuls show that the algorithm lends itself to the wavelet based image sequence coding and outperforms the conventional scheme by up to the maximum 0.28 bpp.

• KIEAE Journal
• /
• 제15권2호
• /
• pp.109-115
• /
• 2015

Purpose: The importance of building airtightness is increased as the demand and expectation of building energy efficiency is growing. Previous research only focused on airtightness of building openings only to improve building airtightness. However, the analysis of difference of airtightness performance according to the characteristic of building structure has not been performed. Therefore, this study analyzed the difference of airtightness performance according to building structural characteristics in a number of ways. Method: Airtightness that are classified as rigid-frame type or wall type are measured and analyzed the difference of airtightness performance between rigid frame type apartments and wall type apartments. This study calculated the heating energy demand and quantitatively analysis using ISO 13790. Futhermore, this study compared research trend of domestic airtightness performance with airtightness standards of the developed countries based on the field measurement. Result: Airtight performance of wall type is better than rigid frame type in terms of energy saving. The difference of heating energy demand between wall type and rigid frame type was $8.14kWh/m^2yr$.