• Women's Health Nursing
• /
• v.6 no.1
• /
• pp.34-45
• /
• 2000

The study was to find whether the educational program contributed to increase of knowledge and self-efficacy of the postpartal primiparas. This study aimed at improvement of the educational effect for postpartal primiparas. The Subjects were 34 primiparas who were admitted to the obstetric ward in a University hospital from November 15th to December 9th, 1999. The Subjects were those who had no labor pain at the admission time, had no complications during labor and delivery and, gave birth to a healthy baby. They were tested on knowledge and self-efficacy two times, one at the admission time and prior to discharge. After the first test nurses in a maternity ward taught them on postpartal care. Two tools were developed by authors based on literature review. The test tool fr knowledge of postpartal car consisted of 23 items. The test tool for self-efficacy of postpartal care consisted of 16 items. Analysis of demographic data were analyzed with calculation of percentage. Score differences between the first test and the second test were analyzed with paired t-test. The Spss (Win 8.0) program was used for data analysis. The results are as follows. 1. There were not significant influencing general characteristics of primiparous to pre-educational knowledge. There were significant influencing general characteristics of primiparous to post-educational knowledge : occupation(t=13.04, p=0.00), postpartal education(t=5.51, p=0.02). 2. There were not significant influencing general characteristics of primiparous to pre-educational self-efficacy. There were significant influencing general characteristics of primiparous to post-educational self-efficacy : antenatal education(t=5.53, p=0.02) 3. Primiparas' knowledge of postpartal care increased significantly after education(t=13.04, p=0.00). 4. Primiparas' self-efficacy of postpartal care increased significantly after education(t=5.51, p=0.02). 5. Correlation between knowledge and self-efficacy was r=.360(p=0.03). We suggest follow-up studies to find whether primiparas' self-efficacy will last after discharge or not.

• Korean Journal of Metals and Materials
• /
• v.50 no.1
• /
• pp.71-77
• /
• 2012

We studied the effect of heat treatment on the microstructures and mechanical strength of the solder joints in the Light Emitting Diode (LED) packages. The commercial LED packages were mounted on the a flame resistance-4 (FR4) Printed Circuit Board (PCB) in the reflow process, and then the joints were aged at $125^{\circ}C$ for 100, 200, 300, 500 and 1000 hours, respectively. After the heat treatment, we measured the shear strength of the solder joints between the PCB and the LED packages to evaluate their mechanical property. We used Pb-free Sn-3.0Ag-0.5Cu solder to bond between the LED packages and the PCBs using two different surface finishes, Electroless Nickel-Immersion Gold (ENIG) and Electroless Nickel-Electroless Palladium-Immersion Gold (ENEPIG). The microstructure of the solder joints was observed by a scanning electron microscope (SEM). (Cu,Ni)6Sn5 intermetallic compounds (IMCs) formed between the solder and the PCB, and the thickness of the IMCs was increased with increasing aging time. The shear strength for the ENIG finished LED package increased until aging for 300 h and then decreased with increasing aging time. On the other hand, in the case of an ENEPIG finished LED package, the shear strength decreased after aging for 500 h.

• Korean Journal of Remote Sensing
• /
• v.22 no.6
• /
• pp.533-542
• /
• 2006

Lidar point clouds provide three dimensional information of terrain surface and have a great advantage to generate precise digital elevation model (DEM), particularly over forested area where some laser signals are transmitted to vegetation canopy and reflected from the bare ground. This study initially investigates the characteristics of lidar-derived height information as related to vertical structure of forest stands. Then, we propose a new filtering method to separate ground points from Lidar point clouds, which is a prerequisite process both to generate DEM surface and to extract biophysical information of forest stands. Laser points clouds over the forest stands in central Korea show that the vertical distribution of laser points greatly varies by the stand characteristics. Based on the characteristics, the proposed filtering method processes first and last returns simultaneously without setting any threshold value. The ground points separated by the proposed method are used to generate digital elevation model, furthermore, the result provides the possibilities to extract other biophysical characteristics of forest.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.380-380
• /
• 2015

국내 소하천에 설치된 대표적인 수공구조물은 교량, 보, 암거 등이 있으며 소교량은 전체 소하천 구조물의 56%를 차지하고 있어 태풍 및 집중호우로 인한 피해사례가 다양하게 보고되고 있다. 소교량에서의 대표적인 피해는 교각기초의 세굴, 여유고 부족으로 인한 파괴 등이 대표적인 피해사례로 알려져 있다. 이와 더불어 유송잡물 집적으로 인한 피해사례가 발생하고 있는데 교량에서의 유송잡물에 대한 피해는 유송잡물 집적으로 인한 교량전도, 수위상승으로 인한 제방월류, 압력흐름 증가로 인한 하상세굴 등의 피해 등 다양한 피해가 발생하는 것으로 보고되고 있다. 이러한 유송잡물로 인한 피해를 저감하기 방법으로는 유송잡물 차단, 우회시설을 설치하거나 충분한 교량의 여유고를 확보하는 방법 등이 있다. 여유고 확보를 위해서는 유송잡물로 인한 교각에서의 수위변동 특성을 검토할 필요가 있다. 따라서 본 연구에서는 유송잡물의 크기변화에 따른 교각주변에서의 수위변동을 실규모-모형실험으로 연계하여 영향을 검토하고자 하였다. 수리실험은 소교량 대상 실규모 유송잡물 집적실험과 집적형태를 반영한 수리특성실험으로 구성하였다. 이를 위해 1/1 규모의 실규모 소교량 교각모형을 대상으로 유송잡물(목본류, 초본+목본류)에 대한 집적실험을 수행하고 집적형태를 파악하였다. 집적형태를 반영한 수리실험은 실규모 실험결과를 토대로 유송잡물 모형을 제작하였으며 잡물의 크기변화에 따른 수위변동 영향을 검토하였다. 실험결과 유송잡물의 집적형태는 전반적으로 직사각형 형태로 집적이 이루어지고 있는 것으로 나타났다. 이러한 형태를 반영한 수리실험결과 유송잡물의 높이가 교각두께의 1배 미만일 경우 상류단에서의 수위변동이 미미한 것으로 나타났다. 폭비와 길이비 변화에 따른 수위변동은 폭비변화에 비해 높이비 변화에 민감하게 영향을 받는 것으로 나타났다. Fr에 따른 수리실험에서도 높이비가 1이상일 경우 상류단에서의 수위상승이 발생하는 것으로 확인되었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.63-63
• /
• 2018

최근 이상기후로 인한 국지성 호우의 발생빈도 및 강우강도의 증가는 하천횡단구조물의 안정성에 문제가 되고 있다. 하천 횡단구조물(보, 물받이공 등)의 파괴는 국부 세굴(bed scour), 파이핑(piping), 구조물 본체의 불안정성 등의 원인으로 발생되고 있으며, 이 중에서 구조물 본체의 불안정성은 도수(hydraulic jump)로 인한 압력변이도 주요 원인이 될 수 있다 (Bower and Toso, 1988; Kazemi, F. et al., 2016). 그러나, 현재 직접적인 파괴 원인인 세굴 등에 대한 연구에 비해 압력변이로 인한 구조물의 파괴원인을 분석하는 연구는 미비한 실정이다. 본 연구에서는 다양한 흐름조건을 발생시켜, 하천횡단구조물 주변의 도수특성 및 도수로 인한 압력변이에 대하여 수리실험 및 수치모의를 통하여 검토하고자 한다. 수리실험에 사용하는 수로는 길이 10 m, 폭 0.3 m, 높이 0.4 m이며 상류로부터 2.5 m 떨어진 곳에 보(weir)를 설치하였다. 실험조건은 다양한 흐름조건에 따른 도수 발생을 검토하고자 상하류 수위를 조절을 통해 Froude 수의 범위를 1 < Fr < 10로 설정하였다. 압력변이는 전압형 압력계(Model : UNIK 5000, 압력 측정 변위 : -2 ~ 5 kPa)를 사용하였으며, 보(weir) 하류단에서 2.5 cm 간격으로 천공하여 측정하였다. 또한 3차원 모형인 FLOW-3D 모형을 이용하여 실험수로를 재현하였으며, 도수 발생 위치, 도수 길이, 도수 발생 시 압력변이에 대하여 실험결과와 수치모의 결과를 비교하여 수치모형을 검증하였다. 최종적으로 Froude 수에 따른 도수특성(도수 발생위치, 도수 길이 등) 및 최대 압력변이를 무차원화 하여 나타내었다. 본 연구는 도수 발생 시 압력변이로 인한 구조물 파괴분석에 대한 기초가 되는 기본적인 연구이나, 향후에는 물받이공 길이, 두께 등 하천횡단 구조물 설계인자 도출에 선행연구로 발전할 수 있다고 판단된다.

• Journal of the Korean Magnetics Society
• /
• v.8 no.6
• /
• pp.357-361
• /
• 1998

For CoZr/Ag/CoCr trilayered films deposited by DC and FR magnetron sputtering method, ferromagentic resonance experiments have been used to investigate the dependence of the exchange coupling between CoZr and CoCr layers separated by Ag layer on the thickness of the Ag layer. The coupling strength K increases with increasing Ag thickness up to 10 $\AA$ with a maximum value of 748 Oe, but oscillates with increasing Ag thickness in the range from 20 to 100 $\AA$. The coupling strength is positive for all samples. Hence, it seems that the exchange coupling between CoZr and CoCr layers separated by Ag layer is ferromagnetic.

• Journal of Korea Water Resources Association
• /
• v.52 no.2
• /
• pp.115-123
• /
• 2019

The effects of the Froude numbers on turbulent flow patterns downstream of a non-submerged spur dike were investigated in a laboratory flume. Three-dimensional velocities and water depths were measured using Acoustic Doppler Velocimetry and distance sensors under three Froude number conditions ($Fr_d=0.31$, 0.38, and 0.46). The results show that there are marginal differences in the velocity fields downstream of a spur dike due to the change of the Froude number. However, an increase of the Froude number was found to reduce cross-sectional area in the flow and to increase the strength of the jet-like flow. The jet-like flow was observed to displace the location of the maximum turbulence kinetic energy within a cross section toward the inner bank in the transverse direction.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.1
• /
• pp.9-18
• /
• 2021

Although Generative Adversarial Networks (GANs) have gained great popularity in computer vision and related fields, generating audio signals independently has yet to be presented. Unlike images, an audio signal is a sampled signal consisting of discrete samples, so it is not easy to learn the signals using CNN architectures, which is widely used in image generation tasks. In order to overcome this difficulty, GAN researchers proposed a strategy of applying time-frequency representations of audio to existing image-generating GANs. Following this strategy, we propose an improved method for increasing the fidelity of synthesized audio signals generated by using GANs. Our method is demonstrated on a public speech dataset, and evaluated by Fréchet Inception Distance (FID). When employing our method, the FID showed 10.504, but 11.973 as for the existing state of the art method (lower FID indicates better fidelity).

• Korean Journal of Metals and Materials
• /
• v.49 no.3
• /
• pp.237-242
• /
• 2011

The effect of shearing speed on the shear force and energy of Sn-0Ag-0.5Cu solder ball was investigated. Various UBM (under bump metallurgy)'s on Cu pads were used such as ENEPIG (Electroless Nickel, Electroless Palladium, Immersion Gold; Ni/Pd/Au), ENIG (Electroless Nickel, Immersion Gold; Ni/Au), OSP (Organic Solderability Preservative). To fabricate a shear test specimen, a solder ball, $300{\mu}m$ in diameter, was soldered on a pad of FR4 PCB (printed circuit board) by a reflow soldering machine at $245^{\circ}C$. The solder bump on the PCB was shear tested by changing the shearing speed from 0.01 m/s to 3.0 m/s. As experimental results, the shear force increased with a shearing speed of up to 0.6 m/s for the ENIG and the OSP pads, and up to 0 m/s for the ENEPIG pad. The shear energy increased with a shearing speed up to 0.3 m/s for the ENIG and the OSP pads, and up to 0.6 m/s for the ENEPIG pad. With a high shear speed of over 0 m/s, the ENEPIG showed a higher shear force and energy than those of the ENIG and OSP. The fracture surfaces of the shear tested specimens were analyzed, and the fracture modes were found to have closer relationship with the shear energy than the shear force.

• Korean Journal of Metals and Materials
• /
• v.47 no.9
• /
• pp.580-585
• /
• 2009

The effects of shear speed and tip height on the high speed shear test of Sn-3.0wt.%Ag-0.5wt.%Cu ball joints were investigated. Solder balls of $450{\mu}m$ in diameter were reflowed at $245^{\circ}C$ on a FR4 PCB (Printed Circuit Board) in order to obtain a sample for the high-speed shear test. The UBM was comprised of Cu/Ni/Au, and the shear speed and tip height varied from 0.5 to 3.0 m/s, and from 10 to $135{\mu}m$, respectively. According to the experimental results, faster shear speed enhanced the shear strength of the solder joints, regardless of the tip height. The fraction of ductile (solder) fracture decreased when the shearing speed was raised from 0.5 to 3.0 m/s. With an increasing tip height from 10 to 50 and $135{\mu}m$, the fracture mode changed from pad lift to mixed (ductile and brittle) and ductile fracture, respectively, while the shearing energy also increased in the same order. The shear energy had a proportional relationship with the fraction of the solder fracture.