• 한국전자파학회지:전자파기술
• /
• 제3권2호
• /
• pp.16-21
• /
• 1992

플란지 평해도파관에 의한 TE-모드의 산란 및 수신을 해석한다. 푸리에 변환을 이요하여 주파수 영역에서 산란파를 표시하여, 경계조건을 사용하여 산란파의 점근해를 구하였다. 수치해석을 통하여 산란특성을 조사하였다.

• Transactions on Electrical and Electronic Materials
• /
• 제15권4호
• /
• pp.182-188
• /
• 2014

When the windowed DFT algorithm is applied in harmonic measurements, the problem of initial-phase sensitivity will be encountered, this has an effect on harmonic amplitude accuracy. In this paper, the origin of initial-phase sensitivity is analyzed and the main factors that influence the level of initial-phase sensitivity are demonstrated. A method of reducing initial-phase sensitivity is proposed to increase the stability of harmonic measurements. We found that initial-phase sensitivity is determined by the side lobe peak level of the window functions when synchronous deviation is fixed. In addition, increasing the length of the time recorded can be used to remove initial-phase sensitivity. The correctness and validity of our conclusions have been confirmed through numerical results and field tests.

• 보존과학회지
• /
• 제5권2호
• /
• pp.45-50
• /
• 1996

Silk fibers excavated at Fujinoki mounted tomb, Shimoikeyana mounted tomb and Kuriyama site were examined using FT-IR microscope and two peaks called amide I and II present in modern silk fibers were compared with those of excavated fibers. It was found that amide ground in a polymer molecule decreased with the progress of degradation and peak intensity of amide group in infrared spectrum decreased correspondingly. The advantages of FT-IR microscopy for the analysis of organic remains in archaeological view point were evaluated and it was concluded that the systematic investigation of spectral change due to the degradation of respective material is essential.

• 한국음향학회지
• /
• 제9권3호
• /
• pp.56-61
• /
• 1990

수중폭발음의 Energy spectrum 분석에 보다 정밀한 이론적 뒷받침을 하기 위하여 폭발음의 파형에 Gaussian formula를 도입하였으며 이 파형에 따른 Energy spectrum 모델을 새로이 유도하였다. Impulse formula를 이용한 Weston 모델이 낮은 폭발 에너지나 음원의 작동수심이 깊을 경우 이론적 모델로서 한계성을 갖는데 비해 이 모델은 이러한 조건에서도 실험결과와 잘 일치되고 있음을 확인할 수 있었다.

• 한국환경보건학회지
• /
• 제14권1호
• /
• pp.39-45
• /
• 1988

The stochastic variations were analyzed periodicity by autocorrelation, variance spectrum and Fourier series. These time series included hourly and hourly mean observations on DO, water temperature and air temperature which measured by automatic recording instrument at Guii from 1, Jan., 1986 to 23, Feb., 1986. The results of study were as follows: l. Autocorrelation coef. (lag time 120) DO($\varrho_1$= 0.9705), WT($\varrho_1$ = 0.9890), and AT($\varrho_1$ = 0.9874) were deeply related. DO and AT clearly showedr 24-hour periodicities while WT showed 23-26 hour periodicity. 2. Spectral density showed high at 24 hour in eech item and all of them showed weak peak at 12 hour. 3. The explained variance, which was a measure of the contribution of periodic function to the original time series, varied high 90.8 - 94.7%. This results showed that water qualities at Guii were affected deterministic components.

• 대한전자공학회논문지TC
• /
• 제38권9호
• /
• pp.21-28
• /
• 2001

DTMF(multi-tone multi-frequency) 신호의 경제적인 검출은 저렴한 가격의 통신장비를 개발하는데 중요한 요소이다. 현재 사용하고 있는 전전자식 교환기의 각 채널은 서로 독립된 DTMF수신기 회로를 갖고 있으며, 검출된 시노를 프로세서에 알려준다. 이때 수신기는 신호검출을 위해 DFT, FFT 및 Goertzel과 같은 알고리듬을 사용한다. 본 논문은 다중채널 DTMF 수신기 신호분석에 QFT(quick Fourier transform) 알고리듬을 적용한다. 연산수 비교를 통해 기존의 FFT, Goertzel 및 DFT 알고리듬보다 메모리 소모를 줄일 수 있고, 실시간 처리 능력이 향상된 알고리즘임을 보인다.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1781-1789
• /
• 2006

Fourier methods are not generally an appropriate approach in the investigation of faults signals with transient components. This work presents the application of a new signal processing technique, the Hilbert-Huang transform and its marginal spectrum, in analysis of vibration signals and faults diagnosis of gear. The Empirical mode decomposition (EMD), Hilbert-Huang transform (HHT) and marginal spectrum are introduced. Firstly, the vibration signals are separated into several intrinsic mode functions (IMFs) using EMD. Then the marginal spectrum of each IMF can be obtained. According to the marginal spectrum, the wear fault of the gear can be detected and faults patterns can be identified. The results show that the proposed method may provide not only an increase in the spectral resolution but also reliability for the faults diagnosis of the gear.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.492-497
• /
• 2003

The dynamic instability for snapping phenomena has been studied by many researches. There is few paper which deal with the dynamic buckling under the load with periodic characteristics, and the behavior under periodic excitation is expected the different behavior against STEP excitation. We investigate the fundamental mechanisms of the dynamic instability when the sinusoidal shaped arch structures subjected to sinusoidal distributed excitation with pin-ends. In this study, the dynamic direct snapping of shallow arches is investigated under not only STEP load excitation but also sinusoidal harmonic excitations, applied in the up-and-down direction. The dynamic nonlinear responses are obtained by the numerical integration of the geometrically nonlinear equations of motion, and examined by the Fourier spectral analysis in order to get the frequency-dependent characteristics of the dynamic instability for various load levels.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.105-108
• /
• 2000

The economical detection of dual-tone multifrequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel has independently a DTMF receiver, and I t informs the detected signal to processors. This paper analyze the power spectra and evaluate the performance of DTMF receiver by using tile quick Fourier transform(QFT) algorithm. As experimental results, it show the improved performance to the DTMF receivers and reduce memory waste and process the real-time.

• 기계저널
• /
• 제24권6호
• /
• pp.446-451
• /
• 1984

최근 기계구조물로부터 발생되는 소음. 진동의 수준을 평가하고 그 대책을 수립하는데 스펙트 럼분석(spectral analysis)과 상관기술(correlation technique)의 이용도가 점증하고 있다. 전자계 산기에 의한 데이터처리기술의 진보에 따라 불규칙한 입력을 받는 기계구조물의 고유진동수추정 및 진동모우드해석, 많은 소음. 진동원을 갖는 플랜트. 선박. 차량기기등의 발생원검출 및 기여 량파악, 그리고 acoustic emission 및 bispectrum에 의한 기기이상진단기술에 적용함으로써 공 학분야에서 한층 중요한 위치를 점하고 있다. 따라서 본 강좌에서는 먼저 상관해석에 의한 스 펙트럼의 정의에 대해서 기술하고 샘플링이론에 만족하는 시간간격으로 샘플링함으로써 얻어지는 시계열데이타를 Fourier 변환하여 주파수영역에서 계의 특성을 해석하는 원리 및 기여함수에 대해 설명하고자 한다. 그리고 입력원간에 상관이 존재하는 경우에 있어서 소음. 진동원을 검 출하고 기여량을 추정할 수 있는 방법으로서의 다차원스펙트럼해석법에 대해 간단하게 기술하 고자 한다.