• Korean Journal of Adult Nursing
• /
• v.28 no.1
• /
• pp.95-105
• /
• 2016

Purpose: This study was conducted to test whether Health Communication Assessment Tool (HCAT) developed by Campbell et al. in 2013 can be applied to assess Korean nursing students' communication skills in simulation education. Methods: The content validity of the Korean version of HCAT (K-HCAT) was evaluated through expert's assessment and a principal component analysis was conducted for testing construct validity. The convergent validity was tested by measuring relationship between the K-HCAT and those of existing communication assessment tool for standardized patient instruction. The evaluation was done by surveying 154 senior students from four different nursing colleges. Results: The K-HCAT was condensed into 15 items from the original 22 HCAT items. Four factors were extracted from the principal component analysis; factor loadings ranged from .50 to .83; cumulative explained variance was 62.65%. Four factors were entitled as 'relationship building', 'empowering', 'empathy/response', and 'education/feedback'. Cronbach's ${\alpha}$ for sub-dimensions ranged from .73 to .84. An evaluation of convergent validity showed that the scores of the K-HCAT were moderately correlated with those of an assessment tool for standardized patient instruction. Conclusion: The K-HCAT can be used as an effective tool for assessing nursing students' communication skills in various kinds of simulation educations Further research is needed to test the consistency of the K-HCAT.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.243-249
• /
• 2008

In the previous study, 141 $BC_3F_2$ lines from a cross between the Oryza sativa cv. Milyang 23 and O. glaberrima were used to identify favorable wild QTL alleles for yield component traits. In this study, we carried out QTL analysis of four grain morphology as well as four yield component traits using 141 $BC_3F_5$ lines from the same cross and compared QTLs detected in two different generations. The mean number of O. glaberrima segments in the 141 $BC_3F_5$ lines ranged from 1 to 13 with 2.69 and 5.71 of the average means of homozygous and heterozygous segments, respectively. There was a three-fold difference in the number of QTLs detected for four traits commonly evaluated in two generations (seven QTLs in the $BC_3F_5$ vs 21 in the $BC_3F_2$ population). The percentages of the phenotypic variance explained by QTLs in the BC3F5 population were similar to or less than those in the $BC_3F_2$ population. This is probably due to the difference in the genetic composition of two populations and the environmental effects. The locations of the QTLs commonly detected in both generations were in good agreement except for one QTL for spikelets per panicle. The yield QTL, yd3 was colocalized with the spikelets per panicle, spp3. Yield increase at this locus is due to the increase in spikelets per panicle, because both traits were associated with increase in spikelets per panicle and yield due to the presence of an O. glaberrima allele. Clusters of QTLs for grain morphology traits were observed in two chromosome regions. One cluster harboring five QTLs near SSR markers RM106 and RM263 was detected on chromosome 2. This population would serve as a foundation for development of the introgression line population from a cross between Milyang 23 and O. glaberrima.

• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.51-56
• /
• 2022

In this study an efficient method for detecting and monitoring engine misfiring, focusing on minute speed changes in the crankshaft is proposed., Its validity is verified using various misfiring cases. Typically, the crankshaft speed fluctuates around the normal value depending on the engine misfiring status. Even a minute speed change in the crankshaft can be estimated by measuring the rotation time of each tooth of the 118-tooth flywheel attached to the crankshaft with a 2-MHz timer. Therefore, a speed pattern for an in-line six-cylinder engine consists of 236 tooth rotation speeds corresponding to the two rotations of the crankshaft, in which all the cylinders complete four-stroke cycle. FFT analysis can reduce the number of components of a speed pattern from 236 to just four major components: - fundamental frequency_(f), 2f, 3f, 6f., - This makes the comparison of the misfiring cases simpler and faster. In the experiment, five engine status cases (one normal firing and, four misfiring cases) were simulated. While the 6f component was the largest for the normal case, the f component increased as misfiring occurred one, two apart, and two consecutive times. The 3D FFT pattern comprising the ratio of f, 2f, and 3f, 6f showed that the distance between the misfiring and normal states was larger

• Food Science of Animal Resources
• /
• v.36 no.6
• /
• pp.719-728
• /
• 2016

The aim of this study was to explore the volatile compounds of hind leg, foreleg, abdomen and Longissimus dorsi in both male and female Hyla rabbit meat by solid phase microextraction tandem with gas chromatography mass spectrometry, and to seek out the key odorants via calculating the odor activity value and principal component analysis. Cluster analysis is used to study the flavor pattern differences in four edible parts. Sixty three volatile compounds were detected, including 23 aldehydes, 4 alcohols, 5 ketones, 11 esters, 5 aromatics, 8 acids and 7 hydrocarbons. Among them, 6 aldehydes and 3 acids were identified as the potential key odorants according to the ratio of concentration and threshold. The contents of volatile compounds in male Hyla rabbit meat were significantly higher than those in female one (p<0.05). The results of principal component analysis showed that the first two principal component cumulative variance contributions reach 87.69%; Hexanal, octanal, 2-nonenal, 2-decenal and decanal were regard as the key odorants of Hyla rabbit meat by combining odor activity value and principal component analysis. Therefore volatile compounds of rabbit meat can be effectively characterized. Cluster analysis indicated that volatile chemical compounds of Longissimus dorsi were significantly different from other three parts, which provide reliable information for rabbit processing industry and for possible future sale.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.12 no.2
• /
• pp.67-74
• /
• 2008

This paper provides the test results of bonding behavior of the interface between concrete substrate and carbon fiber in the rehabilitation method applying carbon fiber with epoxy based resin adhesive. The difference in each components was gradually increased subjected to the repetition of temperature variation, regardless of the strength of the substrate concrete, while the ultrasonic interface between each component occurred. An increase in difference of the temperature resulted in a decrease in bond strength of each component. Associated failure mode was shown to be interfacial failure and substrate concrete failure. No remarkable changes were found in the deformation and ultrasonic velocity of each component until the four cycles of the dry and moisture test. Hence, the moisture condition may not affect the bonding behavior of each component. After the repetition of dry and moisture test, corresponding bond strength was reduced to 40% of that before test. For the effect of freeze and thaw test, the cycle of freeze and thaw within 4 cycles resulted in debonding of each component.

• Steel and Composite Structures
• /
• v.43 no.3
• /
• pp.327-340
• /
• 2022

A vast amount of experimental and analytical research has been conducted related to the seismic behavior and performance of concrete filled steel tubular (CFT) columns. This research has resulted in a wealth of information on the component behavior. However, analytical and experimental data for structural systems with CFT columns is limited, and the well-known behavior of steel or concrete structures is assumed valid for designing these systems. This paper presents the development of an analytical model for nonlinear analysis of composite moment resisting frame (CFT-MRF) systems with CFT columns and steel wide-flange (WF) beams under seismic loading. The model integrates component models for steel WF beams, CFT columns, connections between CFT columns and WF beams, and CFT panel zones. These component models account for nonlinear behavior due to steel yielding and local buckling in the beams and columns, concrete cracking and crushing in the columns, and yielding of panel zones and connections. Component tests were used to validate the component models. The model for a CFT-MRF considers second order geometric effects from the gravity load bearing system using a lean-on column. The experimental results from the testing of a four-story CFT-MRF test structure are used as a benchmark to validate the modeling procedure. An analytical model of the test structure was created using the modeling procedure and imposed-displacement analyses were used to reproduce the tests with the analytical model of the test structure. Good agreement was found at the global and local level. The model reproduced reasonably well the story shear-story drift response as well as the column, beam and connection moment-rotation response, but overpredicted the inelastic deformation of the panel zone.

• Conservation Science in Museum
• /
• v.28
• /
• pp.89-108
• /
• 2022

Among about 500,000 characters in metal types in National Museum of Korea, this study conducts a statistical analysis of 62 metal types from the early Joseon Dynasty, including 33 gabinja (甲寅字) types and 29 eulhaeja (乙亥字) Hangeul types by examining the shape, measuring the specific gravity, and identifying the components based on previously-studied Joseon metal types. Among them, 33 gabinja types and 24 eulhaeja types were made of two-component bronze (copper and tin) (Group A), and four eulhaeja types were produced with three-component bronze (copper, tin and lead). (Group B), and one eulhaeja type was created with two-component bronze (copper and tin) with a high tin content (Group C). By comparing with imjinja (壬辰字) types of the late Joseon Dynasty based on multiple statistical analyses of type components, this study confirms that late-Joseon types have low copper content and high zinc and lead content, and therefore it may be possible to distinguish between the types of early and late Joseon Dynasty.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.3
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.E2
• /
• pp.57-68
• /
• 2006

Four intensive seasonal sampling campaigns between October 1998 and October 1999 were undertaken at an urban site of Chongju, in which polyurethane foam (PUF) sampler was used to collect particulate- and vapor-phase polycyclic aromatic hydrocarbons (PAHs). The contribution to total (particulate+vapor) PAH concentration by the vapor phase component exceeded the particulate phase contribution by factor of ${\sim}2.6$. Summed concentrations of phenanthrene (30.9%), pyrene (16.6%), naphthalene (11.3%) and fluoranthene (11.0%) account for significant amounts of the vapor-phase, while chrysene (12.5%), benzo[b]fluoranthene (11.6%), indeno[123-cd]pyrene (9.9%), benzo[ghi]perylene (9.5%), benzo[k]fluoranthene (9.4%), pyrene (8.9%), and benzo[a]pyrene (8.3%) are found to be the most common PAH compounds in the particulate phase. The results from application of principal component analysis to particulate-phase PAH data demonstrate that a combination of PAH and $PM_{2.5}$ inorganic data is a more powerful tracer of emission sources than PAH species data alone. Particulate-phase PAH species were found to be associated predominantly with emissions from diesel engine vehicles and incineration.

• Molecules and Cells
• /
• v.39 no.11
• /
• pp.834-840
• /
• 2016

Caenorhabditis elegans (C. elegans) utilizes two different cell-cycle modes, binucleations during the L1 larval stage and endoreduplications at four larval moltings, for its postembryonic intestinal development. Previous genetic studies indicated that CDC-25.2 is specifically required for binucleations at the L1 larval stage and is repressed before endoreduplications. Furthermore, LIN-23, the C. elegans ${\beta}$-TrCP ortholog, appears to function as a repressor of CDC-25.2 to prevent excess intestinal divisions. We previously reported that intestinal hyperplasia in lin-23(e1883) mutants was effectively suppressed by the RNAi depletion of cdc-25.2. Nevertheless, LIN-23 targeting CDC-25.2 for ubiquitination as a component of E3 ubiquitin ligase has not yet been tested. In this study, LIN-23 is shown to be the major E3 ubiquitin ligase component, recognizing CDC-25.2 to repress their activities for proper transition of cell-cycle modes during the C. elegans postembryonic intestinal development. In addition, for the first time that LIN-23 physically interacts with both CDC-25.1 and CDC-25.2 and facilitates ubiquitination for timely regulation of their activities during the intestinal development.