• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.207-219
• /
• 2016

Venture company refers to technology-intensive start-ups which is characterized by high high returns and risks to challenge new business to have new ideas and technology. These venture companies, ripple effect on the competitiveness of the national industry is large, and has emerged as a new industry that is able to overcome the difficulties of low growth, as an important element in regional development strategy, urban economy of not only activation, with a large impact on the regeneration and revitalization of the city that has lagged behind, has been recognized its importance. In this study, by investigating the influence of the Anyang city development strategy based on the location factor of venture companies for the activation of Anyang City urban development in satisfaction as an intermediary, empirically location of venture companies factor is trying to analyze the effect of parameters of Anyang city development strategy in relation to the satisfaction. Analysis method is to distribute the questionnaire were analyzed using the SPSS statistical program, the results are as follows. Location factors of venture companies, government support, transportation accessibility, venture integrated factors, it appears as four factors factors of support facilities, the analysis result venture firm location factors found to affect positive satisfied (+) It was. Secondly, in order to verify the parameter effects the result Anyang urban development strategy of using three steps regression analysis, as there is influence of the positive (+) mediated effect was investigated. These results, in order to increase the satisfaction of Anyang City, is not only the physical environmental elements, it is necessary to make the urban development strategies.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.09a
• /
• pp.155-175
• /
• 2005

Soil and rock dynamic properties such as shear wave velocity (VS), compressional wave velocity (VP) and corresponding Poisson's ratio ( v ) are very important geotechnical parameters in predicting deformational behavior of structures as well as practicing seismic design and performance evaluation. In an effort to measure the parameter efficiently and accurately, various bore-hole seismic testing techniques have been, thus, developed and used during past several decades. In this study, cross-hole seismic testing technique which is known as the most reliable seismic method was adopted for obtaining geotechnical dynamic properties. To perform successfully the cross-hole test for rock as well as soil layers regardless of the ground water level, spring-loaded source which impact laterally a subsurface ground in vertical bore-hole was developed and applied at three study areas, which contain four sites composed of two existing port sites and two new LNG storage facility sites. The geotechnical dynamic properties such as VS, VP and v with depth were efficiently determined from the laterally impacted cross-hole seismic tests at study sites, and were provided as the fundamental parameters for the seismic performance evaluation of the existing ports and the seismic design of the LNG storage facilities.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.93-103
• /
• 1999

The steady-state performance analysis program for turboprop engine which was used for a small, middle industrial aircraft and a basic trainer aircraft was developed and linear Gas Path Analysis method was applied to Engine Health Monitoring for Turboprop engine. This program was compared with TURBOMARCH program which is well known with performance and power according to flight Mach No. at the standard atmospheric condition to prove a steady-state performance analysis program. From the result, inlet, exit temperature and pressure of each component had error within 3% and especially power according to flight Mach No. had error within 2.4% so that this program could be assured. To make sure if linear Gas Path Analysis is reasonable four cases were selected. The first is the case that fouling is occurred in compressor only. The second is the case that fouling is occurred in compressor and erosion is occurred in turbine. The third is the case that erosion is occurred in both compressor and turbine and power turbine at the same time. Finally, the case that fouling and erosion are occurred in compressor, compressor turbine and power turbine was selected. Different parameters were selected impartially among the independent parameters so that the effect of measurement parameter selection was observed. From the result, the more measurement parameters the smaller RMS error and even though the number of measurement parameters was the same, the RMS error was obtained differently according to which measurement parameters were selected. The case using eight instrument parameters of case IV-4 had small error comparably and was economic and it was important to select optimal number of measurement and optimal measurement parameters.

• The Korean Journal of Physiology and Pharmacology
• /
• v.19 no.6
• /
• pp.543-547
• /
• 2015

We investigated the combined moisturizing effect of liposomal serine and a cosmeceutical base selected in this study. Serine is a major amino acid consisting of natural moisturizing factors and keratin, and the hydroxyl group of serine can actively interact with water molecules. Therefore, we hypothesized that serine efficiently delivered to the stratum corneum (SC) of the skin would enhance the moisturizing capability of the skin. We prepared four different cosmeceutical bases (hydrogel, oil-in-water (O/W) essence, O/W cream, and water-in-oil (W/O) cream); their moisturizing abilities were then assessed using a $Corneometer^{(R)}$. The hydrogel was selected as the optimum base for skin moisturization based on the area under the moisture content change-time curves (AUMCC) values used as a parameter for the water hold capacity of the skin. Liposomal serine prepared by a reverse-phase evaporation method was then incorporated in the hydrogel. The liposomal serine-incorporated hydrogel (serine level=1%) showed an approximately 1.62~1.77 times greater moisturizing effect on the skin than those of hydrogel, hydrogel with serine (1%), and hydrogel with blank liposome. However, the AUMCC values were not dependent on the level of serine in liposomal serine-loaded hydrogels. Together, the delivery of serine to the SC of the skin is a promising strategy for moisturizing the skin. This study is expected to be an important step in developing highly effective moisturizing cosmeceutical products.

• Convergence Security Journal
• /
• v.14 no.6_2
• /
• pp.73-81
• /
• 2014

This study has an objective to analyze the causal relationship between the emotional labor of the members in the private security firms and its effect on their job stress and validity of the organization. To carry out the study, I established a population of private security guards working at the security firms in Seoul. Then a total of 700 question naires were sent out for the survey using the random sampling method of clusters. The study was carried out over about four months, from May, 2014 to September, 2014. A total of 676 questionnaires were used for the final data. 24 questionnaires were excluded either because they were not returned or contained extreme value. In this study, a statistical package of SPSSWIN 18.0 and AMOS 18.0 were used in the data analysis and the causal relationship was verified using the covariance structural equation. The analysis showed the emotional labor to have a positive effect on the validity of organization but a negative effect on the job stress at the statistical level of p<.001 and the hypothesis was adopted. The hypothesis regarding the job stress was also adopted because job stress was found to have a negative effect on the validity of organization at the statistical level of p<.001. In addition, job stress was found to have a negative effect on the relationship between the emotional labor and validity of organization at the statistical level of p<.001. As a result, the hypothesis about the job stress would function as the parameter was only partially adopted.

• Economic and Environmental Geology
• /
• v.24 no.4
• /
• pp.421-434
• /
• 1991

Ground magnetic surveys were conducted at four areas where the Yangsan fault, the most prominent lineament in the Kyeongsang basin, appears to be passed through. For data processing, IGRF correction, upward continuation and reduction-to-the-pole were performed. The automatic inversion by using a matrix computation method, which takes the depth to bottom layer of the horizontal two layer structure as the model parameter, has been attempted to delineate the subsurface structure. Upward continuation of the surface magnetic map to the same level of the aeromagnetic survey (KIER, 1989) resulted in very similiar patterns to those of aeromagnetic data. Subsurface modeling of eight profile data show that the strike and dip of the Yangsan fault in study areas are $N6^{\circ}-15^{\circ}E$, and near vertical to somewhat eastward, repectively, despite of the local lithological contrast of each study area. It seems that the magnetic effect of faulting in the study area 1, which locates in the most northern part of the survey areas, is disturbed by that of igneous intrusion. At study area 2, the possibility of volcanic or igneous intrusion, which is 200-300 meters wide along the fault plane was presented. At study area 3, unlike other study areas, distinct fracture zone of 500-700 meters in width was revealed along the surface fault line. The andesitic rocks of the study area 4 have very high susceptibilities and the fault line on surface of this area was shifted about 500 meter eastward, as compared with the inferred fault line by the previous study.

• Journal of Korea Soil Environment Society
• /
• v.1 no.1
• /
• pp.89-102
• /
• 1996

An integrated model is presented to describe underground flow and mass transport, using a multicomponent multiphase approach. The comprehensive governing equation is derived considering mass and force balances of chemical species over four phases(water, oil, air, and soil) in a schematic elementary volume. Compact and systemati notations of relevant variables and equations are introduced to facilitate the inclusion of complex migration and transformation processes, and variable spatial dimensions. The resulting nonlinear system is solved by a multidimensional finite element code. The developed code with dynamic array allocation, is sufficiently flexible to work across a wide spectrum of computers, including an IBM ES 9000/900 vector facility, SP2 cluster machine, Unix workstations and PCs, for one-, two and three-dimensional problems. To reduce the computation time and storage requirements, the system equations are decoupled and solved using a banded global matrix solver, with the vector and parallel processing on the IBM 9000. To avoide the numerical oscillations of the nonlinear problems in the case of convective dominant transport, the techniques of upstream weighting, mass lumping, and elementary-wise parameter evaluation are applied. The instability and convergence criteria of the nonlinear problems are studied for the one-dimensional analogue of FEM and FDM. Modeling capacity is presented in the simulation of three dimensional composite multiphase TCE migration. Comprehesive simulation feature of the code is presented in a companion paper of this issue for the specific groundwater or flow and contamination problems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.7
• /
• pp.924-929
• /
• 2004

The objective of this study were to investigate the effect of ejaculation frequency on semen characteristics and to establish a method for quick assessment of sperm concentration in TCC using packed cell volume (PCV) as the parameter (Trial 1). Eighty senior roosters, averaging 61 wk-old, were used and the sperm concentrations were determined using a hemacytometer. The PCV value was measured in a capillary (0.75 mm in inner diameter) by centrifugation. A simple linear regression analysis suggested that the sperm concentrations were significantly correlated with PCV values (r=0.62, p<0.001). Trial 2 was conducted to determine the optimal ejaculation frequency of TCC roosters in a weekly semen collection program. The male birds were subjected to 1, 2, 3 or 6 ejaculations per week for four consecutive weeks and semen characteristics including ejaculation volume (EV, mL), sperm motility (%), PCV (%), sperm concentration (ESC, $\times$10$^{9}$/mL), weekly sperm production (WSP, $\times$10$^{9}$/wk) and average motile sperm numbers (AMSN, $\times$10$^{9}$/ejac) were determined. Average EV was greater in the group with 3 ejac/wk than with only 1 ejac/wk in weeks 1 and 3 of the collection period. WSP increased with ejaculation frequency during the first 3 weeks of collection (p<0.05). Sperm motility was better in the birds with 6 ejac/wk than in single ejaculation group for the first 2 wk and no significant differences were found for the last 2 wk of study. In contrast, the PCV value showed a trend of reduction for the first 2 wks in the 6 ejac/wk group. Surprisingly, no significant differences were detected in the AMSN among treatment groups. The weekly motile sperm production (WMSP) increased with ejaculation frequency. Based on our observation, PCV values could be used for a quick estimation of sperm concentration and an intensive semen collection program enhanced weekly sperm production in TCC roosters.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.1
• /
• pp.35-40
• /
• 2011

While high-definition precipitation maps with a 270 m spatial resolution are available for South Korea, there is little information on geospatial availability of precipitation water for the famine - plagued North Korea. The restricted data access and sparse observations prohibit application of the widely used PRISM (Parameter-elevation Regressions on Independent Slopes Model) to North Korea for fine-resolution mapping of precipitation. A hybrid method which complements the PRISM grid with a sub-grid scale elevation function is suggested to estimate precipitation for remote areas with little data such as North Korea. The fine scale elevation - precipitation regressions for four sloping aspects were derived from 546 observation points in South Korea. A 'virtual' elevation surface at a 270 m grid spacing was generated by inverse distance weighed averaging of the station elevations of 78 KMA (Korea Meteorological Administration) synoptic stations. A 'real' elevation surface made up from both 78 synoptic and 468 automated weather stations (AWS) was also generated and subtracted from the virtual surface to get elevation difference at each point. The same procedure was done for monthly precipitation to get the precipitation difference at each point. A regression analysis was applied to derive the aspect - specific coefficient of precipitation change with a unit increase in elevation. The elevation difference between 'virtual' and 'real' surface was calculated for each 270m grid points across North Korea and the regression coefficients were applied to obtain the precipitation corrections for the PRISM grid. The correction terms are now added to the PRISM generated low resolution (~2.4 km) precipitation map to produce the 270 m high resolution map compatible with those available for South Korea. According to the final product, the spatial average precipitation for entire territory of North Korea is 1,196 mm for a climatological normal year (1971-2000) with standard deviation of 298 mm.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.7-19
• /
• 2005

Mode choice Analysis is essential analysis stage in transportation demand forecasting process. Therefore, methods for calibration and forecasting of mode choice model in aspect of practical view need to be discussed in depth. Since 1980s, choice models, especially Logit model, are spread widely and rapidly over academic area, research institutes and consulting firms in Korea like other developed countries in the world. However, the process of calibration and parameter estimation for practical application was not clearly explained in previous papers and reports. This study tried to explain clearly the calibration process of mode choice step by step and suggested a forecasting mode choice model that can be applicable in real policy analysis by using household survey data of Pusan metropolitan are. The study also suggested a way of estimating attributes which was not observed during the household survey commonly such as travel time and cost of unchosen alternative modes. The study summarized the statistical results of model specification for four different Logit models as a process to upgrade model capability of explanation for real traveler's choice behaviors. By using the analysis results, it also calculated the value of travel time and compared them with the values of other previous studies to test reliability of the estimated model.