• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.342-349
• /
• 2006

The survey guideline of forest products statistics suggests a certain type of standard to aggregate production amount of each item such as dry bracken, raw dates, cracked nuts, It does not, however, give any information about transition ratios, which would apply to convert weights of fresh bracken into dry one, or cracked nuts into the non-cracked. This has been one of the main factors which would make the statistics unreliable. The purpose of this study is to examine the aggregation realities and to put forward some proposals to improve forest products statistics with transition ratios. Targets of this study are 10 forest products that are strongly related to the mentioned problems. With the calculated transition ratios and some assumptions the changing rate of the official statistics of 2004 production amounts ranged from -41% to 474% for the 10 subjects. The suggested figures for transitions are based only on one-year analysis results. Therefore more periods are required to improve the accuracy and the reliability, and this study would be a good starting point.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.12
• /
• pp.1240-1246
• /
• 2010

Enthalpy probe with the inner and outer diameters of 1.5 mm and 4.8 mm, respectively, is designed and used to measure the temperatures and velocities along the centerline of Ar arc plasma flow until the probe was destroyed. For this purpose, Ar arc plasma flow is generated by non-transferred type DC arc heater with the power level of 17 kW. From this experiment, it is shown that the designed enthalpy probe can measure the temperature and velocity of arc plasma flow up to 12,000 K and 600 m/s, respectively, without destroy of probe tip. In this extreme case, the arc plasma flow is calculated to transfer the heat flux of ${\sim}5{\times}10^7\;W/m^2$ to the probe based on the heat and thermal boundary equations near the forward stagnation point of a body immersed in arc plasma flow. Consequently, the designed enthalpy probe can measure the wide ranges of plasma temperatures, velocities and concentrations simultaneously, which are generated by various types of arc heaters within the heat flux ranges of $0{\sim}5{\times}10^7\;W/m^2$ on the probe tip.

• Archives of design research
• /
• v.15 no.1
• /
• pp.369-388
• /
• 2002

21th century that is repealing change is making the world that can enjoy human spiritual character and freedom wholeheartedly. Therefore, meet hereupon arid design may have to bring conversion to position of beginning that can be software at position that is hardware look raw and result look who is wrapping last result arts provide cause. Therefore, user supposes that do difficult form in that recognize things form, and that difference about attribution reaction may do differ and contradictory attribution reaction while specially 40s and 50s recognize product form laying stress on external form embodiment of product form meaning by guess and this research compares and investigates attribution process for human's attribution reaction instinct and attribution reaction type through scientific, theoretical considerations about form and things theoretically and defined cause reasoning in design. And designed product that things are recognized whether felt thing in product form is what hearing example relation sex between analysis and form of meaning induction by attribution leading person about subjective estimation reaction through literature arrange, and analyze and defined if cause some effect to designed product because drawing urea about attribution reaction through an experiment. And presented model about design access method and forward pratical use possibility and hereafter subject together with conclusion.

• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.2
• /
• pp.95-104
• /
• 2013

Objectives : The purpose of this study is to analyze internal research trends of work-related musculoskeletal disorders(WMSDs) and provide problems of researches forward. Methods : 6 Korean databases were searched for articles of WMSDs published from 2000 to 2012, and 264 research were systematic reviewed. An analytical method was used descriptive statistics, an actual number and percentage. Results : The results of distribution by year were reported more than 20 articles after 2004, and 45 articles in 2009. Industrial classification distribution of research subjects the manufacturing industry was many most at the 84. Research contents in most description were 147 whether it was risk factor and relation. Research design type of articles was most description survey research 226. In the research field 89 articles were reported to the journal related to technologies. Conclusions : It is considered to be necessary that ergonomic approach would cooperate with other approaches such as integrated health management system as well as industrial medicine considering psychosocial factors.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.229-235
• /
• 2005

A problem that affects children's dentitions is the harmful habit which is difficult to treat. Harmful habits for children are such as abnormal swallowing patterns, low/forward tongue rest posture problem, habitual open-lips resting posture, habitual mouth-breathing, excessive digital sucking habit and tongue thrusting. Tongue thrusting habits cause a bit of cranio-facial skeletal changes and a great deal of dental malocclusion such as anterior open bite. Anterior open bite causes masticatory, speech, and esthetic problems in the growing children and difficulties in diagnosis, treatment, and the prediction of its prognosis. The treatments of such abnormal behaviors involve orofacial myofunctional therapy and using of habit breaking appliance. The prognosis is not determined by the presence of severity of oral habit but the skeletal tendency of the patient. Usage of tongue crib resulted in not only the discontinuance of the habit but also improvement in overbite and overbite. This study showed that relatively successful results could be generated by using removable tongue crib and myofunctional therapy in the case of openbite related to tongue thrusting habit.

• Physical Therapy Korea
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2005

The purpose of this study was to verify the most effective spinal stabilization exercises program by comparing the activities of muscles contributing to spinal stabilization during four types of exercises using a sling and a mat. Twenty healthy males were recruited and each subjects performed four types of exercises. Exercise 1 was performed in a quadruped position with the subjects lifting the left arm and the opposite leg on the mat. Exercise 2 was performed in a prone position while holding a sling with the right hand and the left knee was fully extended while lifting the left arm and right leg. Exercise 3 was performed in quadruped position while holding a sling with one the right hand and lifting the opposite arm and leg. In exercise 4, subjects were instructed to maintain a balance push-up position while holding slings with both hands in 10 cm forward reaching with extended elbows. Electromyographic(EMG) activities were recorded from the multifidus, external oblique, internal oblique, abdominal rectus, and erector spinalis muscles during the exercises. The EMG amplitude of each muscle was normalized to the amplitude in the maximal voluntary isometric contraction (MVIC) of each muscle. Repeated ANOVA and Bonferroni's tests were used to compare the differences in the muscle activity according to the types of exercise. The EMG amplitudes of all the muscles were significantly different according to the types of exercises (p<.05). The highest EMG activities of each muscle was as follow; multifidus was 73.38%MVIC in exercise 3, the erector spinalis was 40.03%MVIC in exercise 3, the external oblique was 135.88%MVIC in exercise 4, the internal oblique was 128.60%MVIC in exercise 4, and the rectus abdominalis was 95.24%MVIC in Exercise 4. The types of exercises showed a significant difference in composition rate of EMG amplitudes of each muscle (p<.05). EMG composition rate of the multifidus was high in exercise 1 and 3. However, EMG composition rates of the external oblique, internal oblique, and the rectus abdominals were high in exercise 2 and 4. These results showed differences in EMG activities of muscles contributing to trunk stabilization during different therapeutic exercises. Therefore, the type of exercise should be carefully selected to effectively strengthen a specific trunk stabilizer.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2000.09a
• /
• pp.132-146
• /
• 2000

Seismic refraction survey was performed for 10 lines along NE-SW and NW-SE directions above Nampoong gallery at Makyo-ri, Dogye, Samcheok, Kangwon-do. 48 geophones were laid in line with the interval of 1m, and a 5Kg hammer was used as a source at 5 points for each line. Data processing was done using reciprocal time method, GRM, and traveltime tomography which utilizes wavefront expansion method for forward process and STRT for inversion. The result shows that the first layer has its lower boundary between 3.49m and 8.88m. The P-wave velocity of the first and the second layer were estimated as 270${\~}$360m/s and 1550${\~}$1940m/s respectively. When the boundary of the first and second layer is smooth enough and the velocity difference is large enough, GRM has little advantage over reciprocal time method. The result of reciprocal method and traveltime tomography shows consistency. The northeast part of the boundary has syncline structure, which is similar to the topography above. This implies that the collapse of the cavities of Nampoong gallery result in the subsidence of the ground surface. The subsidence is in progress across the Youngdong railroad, therefore a proper reinforcement work is required.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.1
• /
• pp.118-128
• /
• 2016

As the interest on the air-pollution is gradually rising up at home and abroad, automotive and fuel researchers have been working on the exhaust emission reduction from vehicles through a lot of approaches, which consist of new engine design, innovative after-treatment systems, using clean (eco-friendly alternative) fuels and fuel quality improvement. This research has brought forward two main issues : exhaust emission and PM (particulate matter) particle emissions of gasoline vehicle. Exhaust emission and PM particle of automotive had many problem that cause of ambient pollution, health effects. In addition, researcher studied the environment problems of the MTBE contained in the fuel as oxygenate additives. The researchers have many data about the health effects of ingestion of MTBE. However, the data support the conclusion that MTBE is a potential human carcinogen at high doses. Based on the oxygenated fuel additive types (MTBE, Bio-ETBE, Bio-ethanol, Bio-butanol), this paper discussed the influence of oxygen contents on gasoline fuel properties and evaporative emission characteristics. Also, this paper assessed the acceleration and power performance of gasoline vehicle for the fuel property.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.20-29
• /
• 2014

Recently, LTE is preparing to make a new leap forward LTE-A all over the world. As LTE privides high speed service, the role of mobile phones seems to change from voice to data service. According to Cisco, global mobile data traffic will increase nearly 11-fold between 2013 and 2018. Mobile video traffic will reach 75% by 2018 from 66% in 2013 in Korea. However, voice service is still the most important role of mobile phones. Thus, controllability of throughput and low BLER is indispensable for high-quality VoIP service among various type of traffic. Although the maximum AMR-WB, 23.85 Kbps is sufficient to a VoIP call, it is difficult for the LTE which can provide tens to hundreds of MB/s may not keep the certain level VoIP QoS especially in the cell-edge area. This paper proposes a new scheduling algorithm in order to improve VoIP performance after analyzing various scheduling algorithms. The proposal is the technology which applies more priority processing for VoIP than other applications in cell-edge area based on two-tier scheduling algorithm. The simulation result shows the improvement of VoIP performance in the view point of throughput and BLER.

• Journal of Digital Convergence
• /
• v.15 no.2
• /
• pp.173-181
• /
• 2017

In this paper, we have studied tracking as a training stage of considering the position and the scale of a person given its previous position, scale, as well as next and forward image fraction. Unlike other learning methods, CNN is thereby learning combines both time and spatial features from the image for the two consecutive frames. We introduce multiple path ways in CNN to better fuse local and global information. A creative shift-variant CNN architecture is designed so as to alleviate the drift problem when the distracting objects are similar to the target in cluttered environment. Furthermore, we employ CNNs to estimate the scale through the accurate localization of some key points. These techniques are object-independent so that the proposed method can be applied to track other types of object. The capability of the tracker of handling complex situations is demonstrated in many testing sequences. The accuracy of the SVM classifier using the features learnt by the CNN is equivalent to the accuracy of the CNN. This fact confirms the importance of automatically optimized features. However, the computation time for the classification of a person using the convolutional neural network classifier is less than approximately 1/40 of the SVM computation time, regardless of the type of the used features.