• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1239-1244
• /
• 2003

In this paper, we analyzed cell loss rate performance for random traffic sources in wireless ATM(Asynchronous Transfer Mode) access architecture, which consists of access node and wireless channel. Applying queueing model to cell level at access node and considering burst error characteristics in wireless channel, we derived a formula about the cell loss rate of the random traffic in the wireless ATM access architecture. We also applied FEC(Forward Error Correction) schemes to improve the cell loss rate of random traffic. When we applied FEC schemes in the wireless ATM access architecture, we confirmed that the concatenated code provides the most superior performance compared to any other codes.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.43-51
• /
• 2013

This paper describes the development of the telemetry link system for the high data rate transmission in high speed rocket application. In consideration of bandwidth efficiency, frequency selective fading and doppler frequency offset, we used DQPSK instead of PCM/FM which has been the primary modulation format in aeronautical telemetry. Also we used the spatial diversity with multiple receiving antennas to mitigate multipath interference which is the dominant channel impairment and the Turbo Product Code for Forward Error Correction to improve bit error rate performance.

• Journal of Communications and Networks
• /
• v.7 no.4
• /
• pp.489-498
• /
• 2005

For better performance over a noisy channel, mobile wireless networks transmit packets with forward error correction (FEC) code to recover corrupt bits without retransmission. The static determination of the FEC code size, however, degrades their performance since the evaluation of the underlying channel state is hardly accurate and even widely varied. Our measurements over a wireless sensor network, for example, show that the average bit error rate (BER) per second or per minute continuously changes from 0 up to $10^{-3}$. Under this environment, wireless networks waste their bandwidth since they can't deterministically select the appropriate size of FEC code matching to the fluctuating channel BER. This paper proposes an adaptive FEC technique called adaptive FEC code control (AFECCC), which dynamically tunes the amount of FEC code per packet based on the arrival of acknowl­edgement packets without any specific information such as signal to noise ratio (SNR) or BER from receivers. Our simulation experiments indicate that AFECCC performs better than any static FEC algorithm and some conventional dynamic hybrid FEC/ARQ algorithms when wireless channels are modeled with two-state Markov chain, chaotic map, and traces collected from real sensor networks. Finally, AFECCC implemented in sensor motes achieves better performance than any static FEC algorithm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1229-1234
• /
• 2010

High quality and high speed multimedia services will be required in the next generation mobile communications. To satisfy these services, powerful error correction techniques are used. ARQ(Auto Repeat Request) techniques, aspects of the throughput, and FEC(Forward Error Correct) techniques have disadvantages in terms of reliability. H-ARQ(Hybrid Auto Repeat Request) systems have been studied extensively as a solution of these disadvantages. In this paper introduce double layer coding and H-ARQ type, proposed H-ARQ system using double layer coding methods. Simulate BER performance and throughput. And we suggest that according to channel condition suitable H-ARQ type.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.4
• /
• pp.299-302
• /
• 2002

Error detection and correction using CRC and the general class of cyclic codes is an important part of designing reliable data transmission schemes. The decoding method for cyclic codes using covering patterns is easily-implementable, and its complexity de-pends on the number of covering patterns employed. Determination of the minimal set of covering patterns for a given code is an open problem. In this paper, an efficient search method for constructing minimal sets of covering patterns is proposed and compared with several existing search methods. The result is applicable to various codes of practical interest.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2000.11b
• /
• pp.15-19
• /
• 2000

This paper is about MPEG-4 error resilience tools of video streaming on packet service(ex, Internet). It is need to packetization for MPEG-4 video transport by packet unit on MPEG-4 system, this paper suggest packetization method of minimizing packet error on packet service[1]. FEC(Forward Error Correction) and retransmission is usually used for recovery of packet loss, and this paper suggest applying these method to DMIF(Delivery Multimedia Integration Framework) for minimizing packet loss[2].

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.375-384
• /
• 2002

In the current Internet, the QoS of interactive applications is hardly guaranteed because of variable bandwidth, packet loss and delay. Moreover, VoIP which is becoming an important part of the information infra-structure in these days, is susceptible to network packet loss and end-to-end delay. Therefore, it needs error control mechanisms in network level or application level. The FEC-based error control mechanisms are used for interactive audio application such as VoIP. The FEC sends a main information along with redundant information to recover the lost packets and adjusts redundant information depending on network conditions to reduce the bandwidth overhead. However, because most of the error control mechanisms do not consider end-to-end delay but packet loss rate, their performances are poor. In this paper, we propose a new error control algorithm, SCCRP, considering packet loss rate as well as end-to-end delay. Through experiments, we confirm that the SCCRP has a lower packet loss rate and a lower end-to-end delay after reconstruction.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.1 no.2
• /
• pp.37-42
• /
• 2006

In this paper, we study a problem of providing reliable data transmission in wireless sensor network(WSN). A system with forward error correction9FEC) can provide an objective reliability while using less transmission power than a system without FEC. We propose the use of LDPC codes of various code rate (0.53, 0.81, 0.91) of FEC for WSN. Node-node-node interference is considered in the simulation in addition to AWGN in the channel. It is shown that the rate of 0.91 LDPC coded system obtained 7dB gain in signal to noise ratio over a system without FEC.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.212-212
• /
• 2004

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.7
• /
• pp.9-19
• /
• 2004

WLAN (Wireless Local Area Networks) needs error recovery and flow control schemes to support reliable multicast protocol. Limited wireless bandwidth, as well as queuing losses caused by the asymmetric wired/wireless interactions, demands more effective approaches for reducing packet losses. Moreover, since the wireless channel is a shared broadcast medium, if sender receives feedback information simultaneously from several receivers, the feedback delays data frame transmission of forward direction by introducing channel congestion and burden at the sender. Therefore, it is important to minimize the amount of feedback information from receivers. In this paper, we propose an ARS(Adaptive Redundancy Scheme) that combines FEC(Forward Error Correction) using channel state estimation and ARQ(Automatic Repeat Request) both to reduce the amount of feedback information and the number of retransmissions and to guarantee high data reliability in a WLAN multicast environment. Performance of the proposed scheme is evaluated by means of analysis and simulations in AWGN and Rayleigh fading channels. The results show that the proposed scheme reduces the amount of feedback information and the number of retransmissions and guarantees high data reliability, while keeping throughput efficiency similarly with the conventional FEC and ARQ scheme.