• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.233-238
• /
• 2020

PURPOSE. This study aims to compare the marginal fitness of two types of implant-supported fixed dental prosthesis, i.e., cementless fixation (CL.F) system and cement-retained type. MATERIALS AND METHODS. In each group, ten specimens were assessed. Each specimen comprised implant lab analog, titanium abutment fabricated with a 2-degree tapered axial wall, and zirconia crown. The crown of the CL.F system was retained by frictional force between abutment and relined composite resin. In the cement-retained type, zinc oxide eugenol cement was used to set crown and abutment. All specimens were sterilized with ethylene oxide, immersed in Prevotella intermedia culture in a 50 mL tube, and incubated with rotation. After 48 h, the specimens were washed thoroughly before separating the crown and abutment. The bacteria that penetrated into the crown-abutment interface were collected by washing with 500 µL of sterile saline. The bacterial cell number was quantified using the agar plate count technique. The BacTiter-Glo Microbial Cell Viability Assay Kit was used to measure bacterial adenosine triphosphate (ATP)-bioluminescence, which reflects the bacterial viability. The t-test was performed, and the significance level was set at 5%. RESULTS. The number of penetrating bacterial cells assessed by colony-forming units was approximately 33% lower in the CL.F system than in the cement-retained type (P<.05). ATP-bioluminescence was approximately 41% lower in the CL.F system than in the cement-retained type (P<.05). CONCLUSION. The CL.F system is more resistant to bacterial penetration into the abutment-crown interface than the cement-retained type, thereby indicating a precise marginal fit.

• Membrane Journal
• /
• v.30 no.4
• /
• pp.242-251
• /
• 2020

Computer simulation tools mainly used for polymer materials and polymeric membranes are divided into various fields depending on the size of the object to be simulated and the time to be simulated. The computer simulations introduced in this review are classified into three categories: Quantum mechanics (QM), molecular dynamics (MD), and mesoscale modeling, which are mainly used in computational material chemistry. The computer simulation used in polymer research has different research target for each kind of computational simulation. Quantum mechanics deals with microscopic phenomena such as molecules, atoms, and electrons to study small-sized phenomena, molecular dynamics calculates the movement of atoms and molecules calculated by Newton's equation of motion when a potential or force of is given, and mesoscale simulation is a study to determine macroscopically by reducing the computation time with large molecules by forming beads by grouping atoms together. In this review, various computer simulation programs mainly used for polymers and polymeric membranes divided into the three types classified above will be introduced according to each feature and field of use.

• The Korean Journal of Ecology
• /
• v.22 no.1
• /
• pp.31-37
• /
• 1999

The developmental process of Paracolopha morrisoni's galls on Zelkova serrata until the emergence of alatae from the galls was studied at Chonju, Korea. The galls were formed from late April to early May, 1997 and the galls began to open in early June. The length and width of galls and leaves were measured during the period from gall formation to opening. The length and width of galls have been increased until mid May continuously. The galls stopped growing at 12th of May. Fundatrices (the first generation in the gall) began to larviposit from May 15th and the second generation developed in late May. The alatae of the second generation arrived at the final stadium, that was escaped from the gall, in early June. Thus, there were only 2 generations in the gall. The close correlationship between gall growth and leaf growth suggests that leaf growth force may have a great influence on gall development.

• KIEAE Journal
• /
• v.10 no.6
• /
• pp.73-80
• /
• 2010

Since the Korean War, Korea has experienced modernization. The population increase by baby booming has asked for more space for educational facilities. In such a situation, the purpose of educational facilities was to accommodate continuously increasing students, rather than seeking for quantitative demands. In addition, in accordance with social changes, educational shifts were required. After the revision of the seventh national curriculum in education in 1997, the school buildings became varied. The design of buildings in accordance with educational curriculum has been improved, but still lack of forming comfortable environment and considering energy efficiency in school buildings. For the improvement of educational environments, educational media such as TV and computers have been provided, and energy systems, including heating and cooling systems, has been continuously increased. As a result, it appeared that energy use in school buildings and facilities has been steadily increased and that the structure of energy consumption has been also changed, especially with regard to electricity use. Living in the 21st century, human beings face global environmental issues, such as global warming, geographical climate changes, and ozone destruction that are the consequences of fossil energy use. Therefore, even in industrial areas, considering a counterplan for low energy use is being paid attention. Starting with Kyoto Protocol in 1992, people try to decrease carbon dioxide and to develop alternative energies (i.e. natural energy); for example, solar energy, wind force, terrestrial heat, and water power. Advanced countries already set up a criterion for $CO_2$ decrease ranging from office buildings to residential houses and also propose alternatives for the $CO_2$ decrease. However, there is no such a plan for low energy use and $CO_2$ decrease in school facilities, and any research on the actual conditions was not accomplished. Thus, this study examines energy demand in classrooms that take up a large portion of energy demand in school building structure.

• Convergence Security Journal
• /
• v.16 no.3_2
• /
• pp.13-23
• /
• 2016

North Korea had recently conducted the fourth nuclear test and ICBM tests, dared nuclear provocation targeting the Korea and the international community. It is determined based on experiments of nuclear and missile in progress in North Korea that the technical level of nuclear force reached the completion stage of standardization, lightweight, and variation. It is expected to become reality that North Korea executes the nuclear provocation targeting the Korea and the international community in the near future. Nuclear bomb is an absolute weapon that the logic of counterattack after allowing the first strike of the other party cannot be applied due to its tremendous destructive power. Therefore, as the opponent to North Korea that it decided to hold the nuclear, the exercise of anticipatory self-defense in order to guarantee a minimum of right to life is not a choice, but the only essential correspondence concept. At the moment that the North Korean nuclear provocation is expected in the near future, it shall be provided with competence to strike the origin region of provocation by forming a national consensus of preemptive strike enforcement. Also, in preparation for the fifth nuclear test of North Korea, which is anticipated, the national competence must be mobilize to be able to ensure the 'Nuclear Option' from the international community.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1015-1020
• /
• 2011

Nanoimprint lithography has been actively investigated. This method can replicate a nanopatterned master stamp onto a thin polymer film on a silicon substrate and so on. In this study, a square-shaped hollow piezoelectric actuator is presented, which is newly developed. This actuator is used for driving a nanoscale stamp in nanoimprint lithography instead of a conventional electric motor. The fabricated prototype actuator has 95 layers and side lengths of 23 mm and 18 mm for the outer and inner squares, respectively. By adopting a novel process instead of the conventional forming process for fabricating a one-layer actuator, the one-layer is composed of four rectangular segments produced by sawing a ceramic film with a thickness of 0.3 mm. The basic characteristics on displacement and generation force of the fabricated prototype actuator are experimentally investigated. Furthermore, the displacement characteristics obtained by using a PI controller are tested and discussed.

• The Research Journal of the Costume Culture
• /
• v.10 no.6
• /
• pp.763-780
• /
• 2002

The aim of this research is to analyze Vionnet´s geometric features, which can be regarded as the key formative beauty among the external characteristics of her works. and to thereby establish the theory that her works emitted a time-transcending life force because they were patterns designed based on a geometrical frame of mind. To prove such argument, studies to understand the basic geometrical aspects appearing in her works will be made by taking a look at the general features of geometry, viewing Vionnet´s philosophy for designing, and examining the geometric cutting methods. The period covered in this paper will center mainly on dresses Vionnet made from her very active days in the fashion sector, 1919. till when she retired from the fashion industry, around 1939. What's outstanding about Vionnet´s geometric principle expressed in her works is the unique cutting method that acknowledges the silhouette of the human body as a cubic or three-dimensions concept, through insight of the human body, the mechanics of the materials, and geometry. Vionnet introduced a simple and elegant design by combining geometric figure cuts, such as rectan히es. quadrants, and triangles. Moreover, she created a new sewing structure that plans everything about the materials to the tiniest detail, resulting in producing a softer style With this, Vionnet showed the geometrical correlation can bring about harmony and the beauty of ideal proportion, forming the source of eternal beauty. As discussed so fu, the geometrical characteristics appearing in Vionnet´s works are marked such as spirals, zig-zag lines, asymmetries. panels, gradation, golden proportion, and the mobius-band.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.4 no.3
• /
• pp.55-63
• /
• 2000

Studies for tube spin forming have been implemented restrictively compared to spinning process, because of the complex of deformation mechanism. Especially there were not many studies by using FEM(Finite Element Method) for overcoming restriction of upper bound method. In this paper, the tube spinning process is analyzed to produce cylindrical body made by titanium alloy. In analysis, processing parameters was obtained by using upper bound method to consider material properties of titanium alloy and finite element analysis was implemented to investigate the flatness and the elongation of the titanium alloy workpiece by using ABAQUS code. The independent variables are ; material properties of workpiece, angles of roller, reduction of diameter. Three variables, two angles of roller and reduction of diameter are optimized by using the upper bound method. In this method, we can estimate the workable power, working force and reduction of diameter, and also the flatness and the elongation of workpiece by the finite elements analysis using ABAQUS/standard. The results indicates that these variables play a critical factors of spinning process for the titanium alloy and the optimum values of these variables.

• Journal of the Korean Ceramic Society
• /
• v.33 no.7
• /
• pp.725-734
• /
• 1996

Shrinkage behaviors associated with forming drying and firing processes could be a driving force for the densification in materials. Low shrinkage-densification behaviors in clay materials have been shown to be highly dependent upon the processing parameters including particle size effect and kinetic behaviors caused by phases transformation characteristics. Chamottes pre-treated at 90$0^{\circ}C$ and 120$0^{\circ}C$ had dominent influence upon shrinkage control of materials during heat-treatment. But Coarse chamotte particles heat-treated at 120$0^{\circ}C$ did not contri-bute to any densification behaviors in clay materials while these added coarse particles could enhance near-net-shape control. Microstructure / property relationships in clay materials have been thought to be directly influenced by optimized characteristics between low shrinkage and densification behaviors.

• Journal of Sensor Science and Technology
• /
• v.15 no.4
• /
• pp.237-244
• /
• 2006

Atomic force microscope (AFM) has become a common tool for the structural and physical studies of biological macromolecules, mainly because it provides the ability to perform experiments with samples in a buffer solution. In this study, structure of proteins and nucleic acids has been studied in their physiological environment that allows native intermolecular complexes to be formed. Cr and Au were deposited on p-Si (100) substrate by thermal evaporation method in sequence with the thickness of $200{\AA}$ and $500{\AA}$, respectively, since Au is adequate for immobilizing biomolecules by forming a self-assembled monolayer (SAM) with semiconductor-based biosensors. The SAM, streptavidin and biotin interacted each other with their specific binding energy and their adsorption was analyzed using the Bio-AFM both in a solution and under air environment. A silicon nitride tip was used as a contact tip of Bio-AFM measurement in a solution and an antimony doped silicon tip as a tapping tip under air environment. Actual morphology could also be obtained by 3-dimensional AFM images. The length and agglomerate size of biomolecules was measured in stages. Furthermore, $R_{a}$ (average of surface roughness) and $R_{ms}$ (mean square of surface roughness) and surface density for the adsorbed surface were also calculated from the AFM image.