• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.6
• /
• pp.1443-1454
• /
• 2016

Balanced encoding method that implement Dual-rail logic style based on hardware technique to software is efficient countermeasure against side-channel analysis without additional memory. Since balanced encoding keep Hamming weight and/or Hamming distance of intermediate values constantly, using this method can be effective as countermeasure against side channel analysis due to elimination of intermediate values having HW and/or HD relating to secret key. However, former studies were presented for Constant XOR operation, which can only be applied to crypto algorithm that can be constructed XOR operation, such as PRINCE. Therefore, our first proposal of new Constant ADD, Shift operations can be applied to various symmetric crypto algorithms based on ARX. Moreover, we did not used look-up table to obtain efficiency in memory usage. Also, we confirmed security of proposed Constant operations with Mutual Information Analysis.

• Ecology and Resilient Infrastructure
• /
• v.4 no.4
• /
• pp.207-215
• /
• 2017

Hydraulic issues such as flow resistance, side wall correction, sediment, erosion and deposition, and channel design have close relation with distribution of bed shear stresses but the measurement of the distribution of bed shear stresses is not easy. In this study the Preston tube which makes possible relatively simple measurement of bed shear stresses is used to analyze the characteristics of bed shear distribution in compound open channels with different depth ratio. The Preston tubes are made and calibrated to develop the calibration formula and then they are applied to measure bed shear stress distribution in 5 cases depth ratio condition of compound channels. The results are compared with former experiment data, and characteristics of bed shear stress distributions are studied with different channel scales and Reynolds numbers. Although bed shear distributions with depth ratio show overall agreement with former studies, some differences are verified in bed shear variation, formation of inflection point in main channel, and distribution near floodplain junction which are due to high Reynolds number. Through the study applicability of the Preston tubes are also verified and characteristics of bed shear distribution in compound channels are suggested with Reynolds number and depth ratio.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.243-247
• /
• 2005

We propose an efficient block least-mean-square (BLMS) adaptive algorithm, in conjunction with error control coding, for direct-sequence code division multiple access (DS-CDMA) systems. The proposed adaptive receiver incorporates decision feedback detection and channel encoding in order to improve the performance of the standard LMS algorithm in convolutionally coded systems. The BLMS algorithm involves two modes of operation: (i) The training mode where an uncoded training sequence is used for initial filter tap-weights adaptation, and (ii) the decision-directed where the filter weights are adapted, using the BLMS algorithm, after decoding/encoding operation. It is shown that the proposed adaptive receiver structure is able to compensate for the signal-to­noise ratio (SNR) loss incurred due to the switching from uncoded training mode to coded decision-directed mode. Our results show that by using the proposed adaptive receiver (with decision feed­back block adaptation) one can achieve a much better performance than both the coded LMS with no decision feedback employed. The convergence behavior of the proposed BLMS receiver is simulated and compared to the standard LMS with and without channel coding. We also examine the steady-state bit-error rate (BER) performance of the proposed adaptive BLMS and standard LMS, both with convolutional coding, where we show that the former is more superior than the latter especially at large SNRs ($SNR\;\geq\;9\;dB$).

• Journal of the Optical Society of Korea
• /
• v.18 no.5
• /
• pp.459-465
• /
• 2014

Visible light communications (VLC) using the intensity modulation of light-emitting diodes (LEDs) provides a new communication medium to overcome the shortage of radio spectrum, and allows reuse of LED lighting infrastructures. Orthogonal frequency-division multiplexing (OFDM) was introduced to VLC for its merits in mitigating the fading effects resulting from delay spread, and in avoiding low-frequency ambient interference. Noise and clipping are two major factors that degrade the performance of OFDM in VLC. A larger signal easily overcomes noise, but experiences impairment by clipping. Therefore, degradation due to clipping has a trade-off relationship with that due to noise, depending on the signal amplitude of OFDM. In this paper, the optimal signal amplitude in the trade-off is obtained by simulation when the dimming and LED intensity are given. The former indicates a user's requirement for lighting, and the latter represents the channel quality. The required LED intensity-to-noise ratio, as the channel quality that guarantees dimming as well as an adequate bit-error rate (BER), is also discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.1
• /
• pp.135-141
• /
• 2008

The utilization techniques for multiple transmit and receive antennas or high capacity modulation schemes are essential to cope with the rapidly increasing demand for realizing more diverse wireless communication services with high rates. However, employing multiple receive antennas at the mobile units seems less practical due at the size and power limitations. Therefore, transmit diversify techniques have been extensively investigated for the downlink transmission to improve the performance In order to overcome the above mentioned problems, we construct a simulation model which combines STC and polarization diversity which scheme is requiring less cost to realize. Multi-level quadrature amplitude modulation (MQAM) is an attractive modulation scheme for wireless communication due to the high spectral efficiency it provides. Thus, the performance for our scheme is presented when 16QAM modulation techniques are applied. and compared with the former schemes.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.65-69
• /
• 1996

In this paper, the techniques for target state analysis based on a single ping in the ocean environment are proposed and discussed. The first method utilizes the relationship between range and bearing in order to determine the aspect angle of target. The second method uses the Range-Doppler Map. The former method requires the multi-channel data, while the latter uses single channel data. It is concluded, from the simulation, that the target state analysis is quite possible and the techniques mentioned should be used simultaneously to get the improved results.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.1
• /
• pp.46-49
• /
• 2016

A thin film transistor (TFT) has been fabricated using the amorphous 0.5 wt% Si doped zinc-tin-oxide (a-0.5 SZTO) with different electrodes made of either aluminium (Al) or titanium/aluminium(Ti/Al). Contact resistance and total channel resistance of a-0.5SZTO TFTs have been investigated and compared using the transmission line method (TLM). We measured the total resistance of 1.0×10² Ω/cm using Ti/Al electrodes. This result is due to Ti, which is a material known for its adhesion layer. We found that the Ti/Al electrode showed better contact characteristics between the channel and electrodes compared with that made of Al only. The former showed a less contact and total resistance. We achieved high performance of the TFTs characteristic, such as Vth of 2.6 V, field effect mobility of 20.1 cm² V⁻¹s⁻¹, S.S of 0.9 Vdecade⁻¹, and on/off current ratio of 9.7×10⁶ A. It was demonstrated that the Ti/Al electrodes improved performance of TFTs due to enhanced contact resistance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.4
• /
• pp.544-550
• /
• 2014

In this paper, we have proposed a novel method which can analysis the direction finding ambiguity analysis for array geometry in 3 channel and 4 channel multiple baseline direction finding system. Generally, the direction finding ambiguity in the 3 element and 4 element phase interferometer direction finding system is calculated by the simulation for the array spacing or by the probability with the selected antenna array spacing. There are some restrictions to obtain the ambiguity of direction finding system in these methods. The former performs a simulation with every antenna array spacing and the latter calculates the ambiguity with the selected antenna array spacing. To overcome those restrictions, This paper proposed the novel method to calculate the ambiguity using the imaginary antenna array spacing and the phase difference prior to the modular operation in direction finder. Using the proposed method, we obtain the ambiguity probability for each of array geometry composed of multiple baseline. After performing the simulation with the selected antenna array spacing to verify the proposed method, we compared the calculated result data with the simulation data.

• Journal of Acupuncture Research
• /
• v.22 no.5
• /
• pp.29-36
• /
• 2005

Objectives : This study is performed to understand the interrelation between 'Foot soyang muscle of the Gall bladder channel' and 'muscular system' on the basis of the link between meridian muscle theory and myofascial pain syndrome. Methods : We have researched some of oriental medical books about meridian muscle theory and western medical books about anatomical muscular system. Results & Conclusion : 1. Myofascial pain syndrome is the medical treatment which finds the start point of the pain in fascia and then treats it on the basis of object and concrete anatomical theory, so its application is needed for objectification of the oriental medicine. 2. There is a wide difference between myofascial pain syndrome and meridian muscle theory in that the former explains each muscle individually, while the latter classifies muscles systematically in the view of organism. 3. Foot soyang muscle contains Dorsal interosseous m, Extensor digitorum longus m, Musculus peroneus brevis, longus and, tertius, lliotibial tract, Vastus lateralis m, Gluteus m, Aximus m, Piriformis m, Tensor fasciae latae m, Gluteus minimus m, Obliquus internus & externus abdominis m, External & Internal intercostal m, Serratus anterior m, Pectoralis major m, Sternocleidomastoid m, Auricularis posterior m, Temporalis m, Masseter m, Orbicularis oculi m etc. on the basis of function and the nature of a disease reflected in muscle. 4. Foot soyang muscle keeps the balance of left md right of the body on the outside, while the Gall bladder keeps the balance of the JangBuKiHyeul(臟腑氣血) on the inside.

• Journal of Korea Water Resources Association
• /
• v.48 no.4
• /
• pp.299-308
• /
• 2015

The aim of this study is that a theoretical formula for estimating the one-dimensional longitudinal dispersion coefficient is derived based on a transverse distribution equation for the depth averaged stream-wise velocity in open channel. In "Part I. Theoretical equation for stream-wise velocity" which is the former volume of this article, the velocity distribution equation is derived analytically based on the Shiono-Knight Method (SKM). And then incorporating the velocity distribution equation into a triple integral formula which was proposed by Fischer (1968), the one-dimensional longitudinal dispersion coefficient can be derived theoretically in "Part II. Longitudinal dispersion coefficient" which is the latter volume of this article. The proposed equations for the velocity distribution and the longitudinal dispersion coefficient are verified by using observed data set. As a result, the non-dimensional longitudinal dispersion coefficient is inversely proportional to square of the Manning's roughness coefficient and the non-dimensional transverse dispersion coefficient, and is directly proportional to square of the aspect ratio (channel width to depth).