• Economic and Environmental Geology
• /
• v.31 no.2
• /
• pp.149-158
• /
• 1998

Volcanic rocks including rhyolitic tuff, rhyolite and welded tuff in the Bupyeong silver mine area form a topographic circular structure known as a resurgent caldera. Granitic rocks are emplaced inside and outside area of the circular structure. K-Ar dating and Nd-Sr isotope studies were carried out to invesitigate the origin and petrogenetic evolution of the rhyolitic and granitic magma in the Bupeong silver mine area. Whole rock K-Ar age ranges from 208 to 131 Ma for rhyolitic rocks. Radiometric ages for the granitic rocks are 167.6 Ma for pink feldspar biotite granite from inside granitic pluton of the circular volcanic body, 178.8 Ma for the Kimpo hornblende biotite granite and 111.8 Ma for the Songdo foliated granite from outside granitic plutons of the volcanic body. The radiometric age data indicates that the volcanic activities which are partly overlapped by granite plutonic activities in the Bupyeong mine area had recorded early Jurassic and early Cretaceous in age. Initial Sr and Nd isotopic ratios of the rhyolitic rocks ($^{87}Sr/^{86}Sr$=0.710~0.719 and $^{143}Nd/^{144}Nd$=0.5115~0.5118) are similar to those of granitic rocks ($^{87}Sr/^{86}Sr$=0.709~0.716 and $^{143}Nd/^{144}Nd$=0.5115~0.5116) from inside granite stock. This means that similar source materials of felsic magma responsibles for the Bupyeong volcanic rocks and inside plutonic rocks. Based on the Nd and Sr isotopic compositions, rhyolitic and granitic magmas in the Bupyeong area originated from the partial melting of the old continental crust which has Nd model age ranging from 1500 to 2900 Ma. This is analogous to those of the other Jurassic granitoids in South Korea.

• Journal of Korea Foundry Society
• /
• v.40 no.4
• /
• pp.118-127
• /
• 2020

Microstructural evolution during a heat treatment and high-temperature tensile properties have been investigated in conventionally cast CM247LC. In as-cast specimens, MC carbides with high amounts of Ta, Ti, Hf, and W were found to exist in the interdendritic regions, and γ' was observed in the form of cubes and octocubes prior to decomposition into cubes. In the heat-treated condition, some portion of eutectic γ-γ' remained, and uniform cubic γ' was observed in both interdendritic regions and dendrite core. Three types of carbides with different stoichiometries and compositions were found at the grain boundaries. MC carbides with high Hf contents were observed in the vicinity of eutectic γ-γ'. The highest tensile strength value was found at 750℃, whereas the greatest ductility appeared at 649℃. The effect of the temperature on the tensile properties was closely related to the dislocation structure. With increase in the test temperature, the density of dislocations inside γ' decreased, whereas that in the γ matrix increased. Stacking faults generated in γ' at 750℃ had a strengthening effect, whereas thermally activated dislocation motion at a high temperature was considered to have the opposite effect.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.15-21
• /
• 2020

Quantitative risk assessment (QRA) is used as a legal or voluntary safety management tool for the hazardous material industry and the utilization of the method is gradually increasing. Therefore, a leak frequency analysis based on reliable generic data is a critical element in the evolution of QRA and safety technologies. The aim of this paper is to derive the leak frequency function that can be applied more flexibly in QRA based on OGP report with high reliability and global utilization. For the purpose, we first reviewed the data on the 16 equipments included in the OGP report and selected the predictors. And then we found good equations to fit the OGP data using non-linear regression analysis. The various expectation functions were applied to search for suitable parameter to serve as a meaningful reference in the future. The results of this analysis show that the best fitting parameter is found in the form of DNV function and connection function in natural logarithm. In conclusion, the average percentage error between the fitted and the original value is very small as 3 %, so the derived prediction function can be applicable in the quantitative frequency analysis. This study is to contribute to expand the applicability of QRA and advance safety engineering as providing the generic equations for practical leak frequency analysis.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.2
• /
• pp.71-83
• /
• 2019

The volcanic rocks in Saryangdo area are composed of Witseom Andesite, Punghwari Tuff, Araetseom Andesite, Obido Formation, Namsan Rhyolite and Saryangdo Tuff in ascending order. The volcanic rocks has a range of andesite-rhyodacite-rhyolite, which indicates calc-alkaline series and volcanic arc of orogenic belt. In Harker diagrams for trace element and REE pattern, these are also distinguished into so three groups(Witseom Andesite, Araetseom Andesite and Saryangdo Tuff) that each unit is interpreted to have originated in different magma chamber. The Saryangdo Tuff exhibits systematically(chemical zonations that gradually change) from lower dacite to upper rhyolite in section. The systematic sequence of compositional variations suggests that the tuffs were formed by successive eruptions of upper to lower part of a zoned magma chamber in which relatively dacitic magma is surrounded around rhyolitic magma of the central part. The zoned magma chamber was formed from marginal accretion and crystal settling that resulted form magmatic differentiations by fractional crystallization.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.451-470
• /
• 2011

Many countries are committed to absorb foreign direct investments (FDIs). One of the strong motivations is the improvement of innovative capability through the technology spillover of FDI firms. The effect of FDI technology spillover has been widely researched not only on country level, but industry level. With the evolution of globalization and global sourcing of multinational companies, it is necessary to reexamine the relationship between innovation ability of an industry and spillover effect of FDI. This paper investigates the technology spillover effect of FDI on the innovation of Chinese firms. We gathered the data of 34 industries form various sources of Chinese government and the time span is 2001-2008. By using industry level panel data, we set panel data analysis model. In the model, there are two explanatory variables: backward and foreward integration. The analysis result shows that technology spillover of FDI has significant effect on the innovation of foreward integration FDI.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1376-1385
• /
• 2018

Ultrasonic melt treatment (UST) was applied to an A390 hypereutectic Al-Si alloy in a temperature range of $750-800^{\circ}C$ and its influence on the solidification structure and the consequent increase in strength was investigated. UST at such a high temperature, which is about $100^{\circ}C$ above the liquidus temperature, had little effect on the grain refinement but enhanced the homogeneity of the microstructure with the uniform distribution of constituent phases (e.g. primary Si, ${\alpha}-Al$ and intermetallics) significantly refined. With the microstructural homogeneity, quantitative analysis confirmed that UST was found to suppress the formation of Cu-bearing phases, i.e., $Q-Al_5Cu_2Mg_8Si_6$, $Al_2Cu$ phases that form in the final stage of solidification while notably increasing the average Cu contents in the matrix from 1.29 to 2.06 wt%. A tensile test exhibits an increase in the yield strength of the as-cast alloy from 185 to 208 MPa, which is mainly associated with the solute increment within the matrix. The important role of UST in the microstructure evolution during solidification is discussed and the mechanism covering the microstructure-strengthening interrelationship of the ultrasonically treated A390 alloy is proposed.

• Environmental Engineering Research
• /
• v.24 no.3
• /
• pp.521-528
• /
• 2019

Electrochemical method was used for the fracturing flow-back fluid treatment in Guangyuan oilfield. After performing electrolysis, we found that the amount of $H_2$ gas produced by electrode was closely related to the combination mode of electrodes and electrode materials. Using an aluminium electrode resulted in a large $H_2$ production of each electrode combination, whereas inert anode and cathode materials resulted in low $H_2$ production. Then, the relationship between the gas production of $H_2$ and the treatment efficiency of fracturing flow-back fluid in Guangyuan oilfield was studied. Results showed that the turbidity removal and decolourisation rates of fracturing flow-back fluid were high when $H_2$ production was high. If the $H_2$ production of inert electrode was large, the energy consumption of this inert electrode was also high. However, energy consumption when an aluminium anode material was used was lower than that when the inert electrode was used, whereas the corresponding electrode combination production of $H_2$ was larger than that of the inert electrode combination. When the inert electrode was used as anode, the gas production type was mainly $O_2$, and $Cl_2$ was also produced and dissolved in water to form $ClO^-$. $H_2$ production at the cathode was reduced because $ClO^-$ obtained electrons.

• Korean Journal of Metals and Materials
• /
• v.50 no.12
• /
• pp.897-905
• /
• 2012

Directional solidification experiments were carried out in a hypoeutectic Al-11.3Si-3.5Cu system to investigate the microstructural evolution with the solidification rate. At a fixed temperature gradient, a dendritic microstructure was observed at a constant speed of more than $25{\mu}ms^{-1}$, a cellular interface developed at $5{\mu}ms^{-1}$ and the growth rate of $0.5{\mu}ms^{-1}$ led to the stability of the planar interface. The results revealed that primary silicon phases formed among cells, even though the studied Al-Si alloy system formed the composition within a hypoeutectic silicon composition. This suggests that the liquid concentration among cells during solidification reached a higher concentration, i.e., the eutectic concentration. It is, however, interesting that primary silicon phases did not form during a dendritic growth of more than $25{\mu}ms^{-1}$. These experimental observations are explained using the theoretical models on the interface temperatures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.3
• /
• pp.3-12
• /
• 2001

In this course of Internet proliferation, many network-related technologies are examined for possible growth and evolution. The use of Internet-based technologies is private networks has further fuelled the demand for network-based applications. The most promising among the new paradigms is the use of mobile agents. The mobile agent is capable of migrating autonomously form node to node in the network, to perform some computations on behalf of the user. The mobile agent paradigm is attractive alternative to traditional client-server programming for a significant class of network-centric applications. It does however, suffer. from a major drawback namely, the potential for malicious attacks, abuse of resources, pilfering of information, and other security issues. These issues are significantly hampering the acceptance of the mobile-agent paradigm. This paper describes the design of a secure mobile agent gateway 7hat can split and merge the agent code with security policy database on the VPN. This mechanism will promote security in the mobile agent systems.

• The Journal of Korean Institute of Information Technology
• /
• v.17 no.5
• /
• pp.129-136
• /
• 2019

Many IoT devices like sensors lack screen and input devices, thus making them hard to meet the consent conditions that GDPR requires. This is acting as a legal barrier for further advancement in the business field. In this paper, we designed the process for consent of personal information collection that meets the legal conditions. In this design, user's personal data is received in an encrypted form by data collecting server first. The encrypted personal data can be decrypted after associating with user agent based on the consent procedure of the collection of personal information. During the consent procedure, user agent understands the privacy policy about personal information collection and offers the key to decrypt the data. This kind of personal information collection agreement procedure will satisfy the transparent and freely given consent requirements of GDPR. Thus, we can speculate from here that the proposed procedure will contribute to the evolution of IoT business area dealing with personal information.