• Journal of Korean Society of Forest Science
• /
• v.84 no.4
• /
• pp.447-455
• /
• 1995

Regeneration process of a mongolian oak forest in Bukam-Ryeong area, Mt. Jumbong, Kangwon-Do, was studied in relation to its structure. The dominant trees of the stands came up beyond 10m in height. The upper-tree layer was highly dominated by oaks, and they distributed horizontally in random. Oak trees of the middle layer and the lower layer were few in number and small in basal area, and tended to be distributed contagiously. In the trees of the upper layer, the distribution of the age tended to be two modal type which has the mode of 70 and 230 years in plot. In the horizontal distribution of these trees, some of the even-aged cluster which were constituted of several trees, were found. The rate of the stern diameter increment during first 25 years of the oaks in upper layer were higher than those of the same species in the middle layer. These results showed that after the forest canopy had been broken out, the seedlings which were established in dense there grow with the decreasing density and some of these, of which distribution became in random, would constitute the canopy.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.21 no.3
• /
• pp.103-111
• /
• 2016

Seasonal dynamics of kelp forest-forming algae, Ecklonia cava population formed following the large-scale disturbance by Typhoon 'Bolaven' in August 2012 were investigated in Jeju Island, Korea. Morphological characteristics, recruits density, mortality rate, total density and biomass were monitored bimonthly from June 2013 to June 2015. Total and longest blade lengths, and individual weight of E. cava showed distinct seasonal trends. Stipe length increased from winter to spring, but did not show increase or reduced from summer to autumn. This indicates that morphological characteristics of E. cava are mainly affected by the change of blades. The optimal temperature for E. cava growth was about $15-18^{\circ}C$ during winter to spring while the growths were inhibited at the water temperature above $20^{\circ}C$ during summer. E. cava exhibited very low recruitment during spring-summer. However, high recruitment was observed on April 2015 when canopy cover was very low due to low density. This indicates that recruitment of E. cava was controlled not by seasonal effects but by physical factors such as canopy and space. The mortality rate of juvenile plants was highest due to their unstable settlement. By June 2015, 34 months after the disturbances, E. cava was almost recovered to the pre-disturbance population size structure. These results suggest that recovery of kelp forest following the large-scale disturbance requires a considerable period of time (more than three years). This study should provide valuable ecological information on management, restoration and protection of kelp species.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.615-621
• /
• 2005

In this paper, a model for simulating synthetic aperture radar(SAR) images of earth surfaces. The earth surfaces include forest area, rice crop field, other agricultural fields, grass field, road, and water surface. At first, the backscattering models are developed for bare soil surfaces, water surfaces, short vegetation fields such as rice fields and grass field, other agriculture areas, and forest areas. Then, the SAR images are generated from the digital elevation model(DEM) and digital terrain map. The DTM includes ten parameters, such as soil moisture, surface roughness, canopy height, leaf width, leaf length, leaf density, branch length, branch density, trunk length, and trunk density, if applicable. The scattering models are verified with measurements, and applied to generate an SAR image for an area.

• Journal of Forest and Environmental Science
• /
• v.38 no.1
• /
• pp.21-37
• /
• 2022

The present study was carried out to evaluate the chemical properties of soil in relation to forest structure and composition at different altitudes (900-2,600 m asl) in a part of Western Himalaya. The composite soil samples were taken from three (viz. upper, middle and lower) depths. The soils of the whole study area were acidic in nature (pH=4.90-5.51). Contents of Nitrogen (N), Phosphorus (P), Potassium (K), Carbon (C) and soil organic matter (SOM) showed much fluctuation during different seasons of year. Nitrogen content showed significant positive correlations with altitude (r=0.924, p<0.05) and different community parameters like species diversity (r=0.892, p<0.01) and species richness (r=0.941, p<0.05). Phosphorus exhibited direct correlations with carbon (r=0.637) while weak negative correlations with different community parameters like species richness & diversity, total basal cover (TBC), density and canopy cover. Carbon content and hence SOM showed direct correlations with Nitrogen (r=0.821, p<0.01); Phosphorus (r=0.637, ns) and Potassium (r=0.540, ns). But no significant relationship was observed between K content and species richness (p=0.30, r=-0.504); between K content and species diversity (p=0.14, r=-0.672); between P content and species diversity (p=0.29, r=-0.513) and species richness (p=0.23, r=-0.575). Among the different soil nutrients, only N showed a significant positive correlation with altitude while all others exhibited negative (but non-significant) correlation with it. The study revealed that the chemical properties affect and are reciprocally affected by forest structure and composition and that N rich soils of higher altitudes are best for the growth and development of forests.

• Journal of Korean Society of Forest Science
• /
• v.99 no.1
• /
• pp.153-162
• /
• 2010

Abies holophylla Maxim. is a shade tolerant species that has potential to be used for continuous cover forestry system. Stand structure and natural regeneration of A. holophylla stands in Yong-In area located in the central part of Korea was investigated to estimate the self sustainability of A. holophylla plantation. Species composition, diameter at breast height (DBH) and height distribution of trees larger than 2 cm DBH were measured in ten stands in three study sites of Jeongsu-ri, Daedae-ri, and Hodong. Species and coverage of shrub layer, and A. holophylla seedlings were also investigated. While A. holophylla in non-managed stands (Jengsuri and Daedae-ri study sites) had the importance value of 40% and showed continuous diameter and age distribution, A. holophylla in Hodong site had narrow bell-shaped DBH distribution mostly concentrating between 25-35 cm DBH classes, and single canopy structure. Abies holophylla stands in Hodong have experienced occasional thinning and selective cutting. The correlation coefficient between age-DBH was significant but low ($R^2$=0.2, P=0.03), and similar aged A. holophylla had diverse DBH values. Continuos DBH distribution and multi-canopy structure of A. holophylla stands in Jeongsu-ri site show that natural regeneration of A. holophylla has been continuously occurred in this area. Seedling density of A. holophylla was between 2000 and 33000/ha, however, the number of trees in 2-5 cm DBH class was only 40-150 trees/ha, implying that the survival rate of seedlings is not high. Continuous natural regeneration and 0.6 cm/year of diameter growth rate of A. holophylla indicate that this area could be an appropriate habitat for this species, and A. holophylla plantation in this region seem to persist suggesting the possibility of managing the stands for continuous cover forestry system as well as selective harvesting practices.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.3
• /
• pp.83-95
• /
• 2013

To understand natural regeneration and stand development after fire in mixed broadleaved-coniferous forests of Sikhote-Alin Mountains, ten sample plots of $50m{\times}50m$ size were established in 1975 and 1983 at the stands burned by wildfires in 1973 and 1982, respectively. And, the number of naturally regenerated seedlings were monitored in two $50m{\times}4m$ subplots in each plot. The most fire-sensitive conifer species is Abies nephrolepis, while Betula costata is the most fire-sensitive broadleaved tree species. The most fire-resistant species were Q. mongolica, T. taquetii and A. mono. The results of 20 and 30 years after the fire showed that pioneer tree species, e.g. Populus, Salix, and Betula, were regenerated immediately at the early stage of stand development and grew where there is a mono canopy layer with high density. On the other hand, the densities of successors, e.g. Pinus koraiensis, Picea jezoensis, Abies nephrolepis, Acer mono and Tilia taquetii, which were present in the study plots before the fire, increased gradually. Naturally regenerated tree species after forest fire by the growth rate were divided into three groups according to their annual height growth. The seral tree species (Betula costata, Betula platyphylla, Padus maackii, Populus tremula and Sarix caprea) belong to the first group and have the highest growth rate (from 40 to 96 cm per year). The late successional broad-leaved trees (Tilia taquetii, Acer mono and Quercus mongolica) belong to the second group and have intermediate annual height growth (from 3.7 to 13.5 cm per year). The late successional coniferous species (Picea jezoensis, Pinus koraiensis and Abies nephrolepis) form the third group and have the least annual height growth (from 1.4 to 3.5 cm per year).

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.310-317
• /
• 2008

Although aerial LiDAR had been launched commercially several years ago, it is still difficult to study data acquisition conditions and effects with various datasets because of its acquisition cost. Thus, this research was performed to study data acquisition conditions and effects with virtually various datasets. For this research, 3D tree models and forest stand models were built to represent graded tree sizes and tree plantation densities. Also, a variable aerial LiDAR acquisition model was developed. Then, through controlling flight height parameter, one of the data acquisition parameters, virtual datasets were collected for various data acquisition densities. From those datasets, forest canopy volumes and maximum tree heights were estimated and the estimated results were compared. As the results, the estimated is getting closer to the expected during the data acquisition density increase. This research would be helpful to perform further studios on relations between forest inventory accuracy and LiDAR cost.

• Korean Journal of Environment and Ecology
• /
• v.22 no.3
• /
• pp.332-337
• /
• 2008

This study was conducted to clarify the differences in bird communities in breeding season between coniferous forests of Mt. Namsan and Gwangneung areas from April to August 2006. We chose a study site of 10ha in size for territory mapping of breeding bird community in each area. There were significant difference in DBH distribution of trees and average foliage profiles between both study areas. Number of breeding species and pairs, breeding density, and bird species diversity were higher in Gwangneung area than in Mt. Namsan area. Number of bird species and breeding pairs belonged to hole and canopy guild were different between both study areas. The difference in breeding bird communities between both study areas may be related with forest structure. For the protection and management of birds, greater structural complexity would be needed in Mt. Namsan area.

• Korean Journal of Environment and Ecology
• /
• v.32 no.2
• /
• pp.165-175
• /
• 2018

The purpose of this study is to provide the basic data such as distribution status, growth characteristics, and the structural characteristics of forest stands for the systematic conservation and management of relict forest trees (stem girth of 300cm or larger) established naturally in Gangwon Province, Korea. The survey showed that 434 individuals of 19 species (conifers: 228 individuals of 4 species, broad-leaved trees: 206 individuals of 15 species) were distributed in Gangwon Province, and Taxus cuspidata was the most abundant among them with 203 individuals or about 46.7 % of the total. The stem girth was average of 404cm (conifers: 373cm, broad-leaves: 421cm), and Tilia amurensis with multi-stemmed growing on Sorak mountain range had the largest stem girth at 1,113cm. The average height and the crown width of relict forest trees were 15.4m and 10.0m, respectively. Although the environments of relict forest trees showed a slight difference by species, the relative appearance frequencies of most trees were high in the environments where the altitude was higher than 1,000 m, slope degree was greater than $25^{\circ}$, the slope faced north, and microtopography was at the upper of slopes. Regarding the stand characteristics of relict forest trees per unit area ($/100m^2$), the average total coverage was 294% (max. 475%), the total average number of species was 36 species (max. 60 species), the average species diversity index (H') was 2.560 (max. 3.593), the average canopy closure was 84.8% (max. 94.6%), and the average basal area (/ha) was $52.7m^2$ (max. $116.4m^2$, relict trees $30.0m^2$, and other trees $22.7m^2$). The analysis of the dynamics of the forest stands where relict forest trees were growing showed four types of the maintenance mechanisms of relict forest trees depending on the supply pattern of succeeding trees: "Low-density but persistent type (Quercus mongolica, Abies holophylla, Tilia amurensis, and Pyrus ussuriensis)," "Long ago stopped type (Pinus densiflora)," "Recently stopped type (Abies nephrolepis, Quercus variabilis, and Betula schmidtii)," and "Periodically repeated types of supply and stop (Salix caprea and Quercus serrata).".

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.46-54
• /
• 2021

This study compared and analyzed the effects of forest tending works on the vertical distribution of wildfire fuel loads on Pinus densiflora stands in Gyeongbuk province. The study sites were located in Youngju and Bonghwa in Pinus densiflora stands. A total of 10 sample trees were collected for the development of the crown fuel vertical distribution model. The 6th NFI (National Forest Inventory) selected a sample point that only extracted from managed and unmanaged stands of Pinus densiflora in the Gyeongbuk province. The fitness index (F.I.) of the two models developed was 0.984 to 0.989, with the estimated parameter showing statistical significance (P<0.05). A s a results, the vertical distribution of wildfire fuel loads range of unmanaged stands was from 1m to 11m with the largest distribution at point 5m at the tree height. On the other hand, the vertical distribution of wildfire fuel loads range of the managed stands was from 1m to 15m with the largest distribution at the point of 8m at the tree height. The canopy bulk density was 0.16kg/㎥ for the managed stands and 0.25kg/㎥ for the unmanaged stands, unmanaged stands were about 1.6 times more than managed stands. This result is expected to be available for simulation through the implementation of the 3D model as crown fuel was analyzed in three dimensions.