• Journal of Welding and Joining
• /
• v.24 no.5
• /
• pp.62-66
• /
• 2006

Panel line is an important process occupying the largest work amount in shipbuilding. In this research product simulation has been carried out to establish the optimal production scheduling. For this purpose a web-based panel line simulator was developed using an object modeling technology and C# language. The balance of work-load and increase in the productivity by the improvement of production facilities and process are the key factors for a good scheduling. In this study SPRT(Shortest Remaining Process Time) rule was applied for the work-load balancing and a good result achieved. To increase the productivity in the stiffener welding stage which is a bottleneck; process, more welding heads and higher welding speed were tested using the developed simulator. The simulation results showed that either more welding head or higher welding speed decreased the total work time. Use of both, however, deteriorated the productivity because of the bottleneck in the following stage. This result points out that the improvement of production facilities and/or process should be evaluated with their influences on the leading and following processing stage.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.5
• /
• pp.38-44
• /
• 2000

High Quality is requested by Consumers more and more, Accordingly, the Quality of Yarns should be followed to satisfy the Desire of Consumers. Therefore, Yarn Hairiness, which has effects on Touch, Handle, iud Dyeing, is one of important factor. In order to reduce Yarn Hairiness, various tests were made in Spinning process and the following Spinning conditions can be suggested. -. The Speed should be as lower as possible. -. Using proper Tension Disc on Winding process. -. Using Colletor on Ring Spinning process. -. Using proper Ring and Traveller :n Ring Spinning process To get the best results, continuous Trial tests should be carried-on.

• Journal of the Korean Home Economics Association
• /
• v.31 no.2
• /
• pp.69-80
• /
• 1993

This study intended to review the historical mate selection process and to present wholesome mate selection process. For this purpose, reviewing the contents of secondary sources and novel literature. The following conclusions were drawn from this study: Mate selection process was a kind of culture which was influenced by social atmosphere. And pre-17th century, most of the young people had social intercourse liberally. Therefore we must constitute wholesome mate selection culture through early socialization about heterosexual social intercourse.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.501-504
• /
• 2014

This paper was developed and described core-process to implement low on resistance which was the most important characteristics of SJ (super junction) MOSFET. Firstly, using process-simulation, SJ MOSFET optimal structure was set and developed its process flow chart by repeated simulation. Following process flow, gate level process was performed. And source and drain level process was similar to genral planar MOSFET, so the process was the same as the general planar MOSFET. And then to develop deep trench process which was main process of the whole process, after finishing photo mask process, we developed deep trench process. We expected that developed process was necessary to develop SJ MOSFET for automobile semiconductor.

• Journal of Distribution Science
• /
• v.15 no.8
• /
• pp.65-73
• /
• 2017

Purpose - Although e-learning has this advantage, currently many organizations have failed to recognize the necessity for basic e-learning educational training. It follows that practitioners working in the above organizations face the difficulty of having to find educational training processes of boosting their capabilities by themselves, rather than being able to utilize the educational training processes offered by e-learning. So of their own accord, learners have considered the necessity of information relating to being able to choose between high quality educational training processes. The purpose of this study is to propose opening e-learning content information for enabling an efficient choice of learning processes related to e-learning. Research design, data, and methodology - To pinpoint the items of e-learning content information, the study was initiated according to the following process. First, information relating to e-learning content (offered on e-learning websites) was researched. Second, based on the items of information which emerged from the research, selection and validity verification took place with 5 e-learning specialists as the subjects. Third, the opinions of adult learners at K University were collated relating to the items of information which emerged from the research. Results - The e-learning content information was comprised of 16 items in order to improve the choosing process for learner's e-learning contents. The analysis results showed that when learners were choosing e-learning processes, the most highly considered item was 'mobile support' (4.35). Following this (in order) were 'tuition fees' (4.30), 'certificate issuing' (4.23), and 'awareness of educational institution' (4.18). The least considered items were 'recruiting learners' (3.01) and 'tutor support' (3.18). Conclusions - The 16 items of e-learning content information in this study, were deemed to be helpful to learners in providing them with a choice of desirable e-learning process when this process was offered to them. Following this, there is a need for service institutions offering e-learning processes to make public the information suggested by this study. Research into educational methods additionally points to a necessity for not only e-learning forms, but also offline educational methods and a combination of blended learning to be offered and run parallel to e-learning.

• The Journal of Korean Medical History
• /
• v.18 no.1
• /
• pp.103-126
• /
• 2005

1) Objective This research is a process of examining the Traditional Acupunctural Methods left in our documents. The objectives of this paper are explaining the process of researching documents and reporting several points revealed in this process. 2) Process This study was done through the following steps: (1) We located the Acupunctural Methods in the original text database on the web. (2) We sorted them according to criterion. (3) We set up some standard clauses in order to organize the selected information. (4) We re-organized the information following the standards within the categories. (5) As for clauses that were not fully explained in the documents, we tried to restore them through other documents. 3) Results (1) 11 standard clauses were set up in order to organize the Traditional Acupunctural Methods. (2) Traditional Acupunctural Methods were extracted from 22 documents, (3) 24 Traditional Acupunctural Methods were extracted and organized by standards. (4) We learned of similar methods with resembling ways of drawing blood and methods with deep interest in the depth of needle insertion. Also, we were able to gain a clue to the exchange of Acupunctural Methods among the three Asian countries and the possibility of research using the Korean Medicine Database.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1616-1625
• /
• 2019

Measuring occurrence times of random events, aimed to determine the statistical properties of the governing stochastic process, is a basic topic in science and engineering, and has been the subject of numerous mathematical modeling approaches. Often, true statistical properties deviate from measured properties due to the so called dead time phenomenon, where for a certain time period following detection, the detection system is not operational. Understanding the dead time effect is especially important in radiation measurements, often characterized by high count rates and a non-reducible detector dead time (originating in the physics of particle detection). The effect of dead time can be interpreted as a suitable rarefied sequence of the original time sequence. This paper provides a limit theorem for a high rate (diffusion-scale) counter with extendable (Type II) dead time, where the underlying counting process is a renewal process with finite second moment for the inter-event distribution. The results are very general, in the sense that they refer to a general inter arrival time and a random dead time with general distribution. Following the theoretical results, we will demonstrate the applicability of the results in three applications: serially connected components, multiplicity counting and measurements of aerosol spatial distribution.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.62-68
• /
• 2002

To satisfy the requirement of the one axis linear positioning system, which is following control of the desired trajectory without following error and is the high positioning accuracy, feed-forward loop having cogging force model is proposed. In the one axis linear positioning system with linear PM motor, cogging force acting as disturbance is modeled analytically. Analytic model of cogging force is verified by result measured from positioning system constructed with linear PM motor. Measured result is very similar with proposed analytic model. Cogging force model is used as feet forward loop in control scheme of linear positioning system. Cogging force feed-forward'loop is obtained from analytic model of cogging farce. Trajectory following error is reduced from 300nm to 100nm by applying the proposed cogging farce feed-forward loop. By using analytic model of cogging force, the control scheme is simplified. Also this analytic model is applicable to calculation of characteristic value of positioning system in design process.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.135-139
• /
• 1992

Control of tool-environment interaction force to comply the robot system to an environment is of vital in many automated process. This paper presents the implementation of an adaptive force control with commercial robot system in two dimensional contour following task. A model reference adaptive control system, combined with the linear compensators, is implemented. That is, a use of adaptive control is to provide an auxiliary control system so that the contour following performance can be improved from that of using linear control system only. Hyperstability is used to derive the adaptive control law. Experimental verification of the proposed control system is obtained using PUMA 560 robot system. Data obtained experimentally shows that the use of additional adaptive control system improves the contour following performance about 30% in RMS contact force errors upon that of the system controlled by the linear compensators only.

• 기술발표회
• /
• s.2006
• /
• pp.279-291
• /
• 2006

This study shows decision-making process for selection of cutoff wall on a wastewater treatment project. There are 10 different cut-off wall methods So, we examine the site to gather information for find appropriate methods. After using that information, 10 cutoff wall methods are reviewed for analysis. Through brainstorming, four alternatives are selected for design VE item. Following the standard VE process, we established performance criteria and evaluated function score(F) using questionnaire. The questionnaires, brainstorming and AHP method for weighting on performance criteria and evaluate function score increased the reliability of this selection process. Water Jet method, one of four methods, has the best function score(F=92.71) and the lease construction cost(as cost index 1,000). The value score also highest as 92.7, so we select the method. The result is value innovation type In addition, the authors try to calculate the environmental burden in selection process using LCA. We cannot conduct the full LCA as defined ISO, so perform Simple LCA In LCA result, the cut-off grouting has the least environmental burden as index 9.09E+01 and Water Jet method has following as the second. To selection best method to specific area and purpose, design VE/LCG process used as useful tool and it is needed to develop integrated method that evaluate VEILCC and LCA as one-set process.