• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.5
• /
• pp.345-355
• /
• 1991

In order to effectively utilize the by-products of sea-food, the utilization of enzyme-modified flounder(Limanda aspera) skin gelatin as an emulsifier was investigated. In the experiment, the gelatin was extracted from the flounder skin with the heat-treatment at $60^{\circ}C$ and in pH 5.0 for 3 hrs with four volumes of distilled water and emulsifiers were enzymatically modified L-leucine alkyl esters$(L-leucine-OC_n$ : n= 2, 4, 6, 8 and 10) to the gelatin$(EMFSG-C_2,\;EMFSG-C_4,\;EMFSG-C_6,\;EMFSG-C_8,\;EMFSG-C_{10})$ for improving the functional properties such as emulsifying activity, emulsifying viscosity, whippability, electric conductivity, critical micelle concentration and interface tension, etc. Also, the functional properties of the L-leucine alkyl ester modified gelatins were compared with those of Tween-60 as reference. Molecular weights of the enzymatically modified flounder skin gelatin(EMFSG) were 20.5kDa. in $EMFSG-C_2.\;19.5 kDa.\;in\;EMFSG-C_4\;and\;16.5kDa.\;in\;EMFSG-C_6,\;EMFSG-C_8$ and $EMFSG-C_{10}$. respectively. Emulsifying activity and emulsifying viscosity in the modified gelatins were risen with increase of carbon number of the introduced L-leucine alkyl esters. Among the modified gelatins, $EMFSG-C_6$ exhibited the highest emulsifying stability and foaming stability, whereas $EMFSG-C_8$ showed the highest whippability. The electric conductivities of the all $EMFSG-C_n$ were linearly risen to critical micelle concentration(CMC) , therefore $EMFSG-C_{10}$ exhibited the lowest CMC value and interface tension, and dense particles in the microscopic observation. In conclusion, the best quality in functional properties was assured on $EMFSG-C_{10}$.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.2
• /
• pp.182-192
• /
• 1996

In this study, the relationship between wax matrix in lipstick and sweating was investigated by observing the change of size and shape of wax matrix with sweating by Scanning Electron Microscopy (SEM). For observation by SEM, a lipstick sample was frozen in liquid nitrogen, then the oil in the lipstick was extracted out in cold isopropanol($-70^{\circ}C$) for 1-3days. After isopropanol was evaporated, the sample was sputtered with gold, and examined by SEM. When examined the sweated sample by SEM, the change of wax matrix underneath the surface from fine, uniform structure to coarse, nonuniform structure was observed, which was resulted from the caking of surrounding wax matrix. That is, the oil underneath the surface was migrated to the surface of lipstick with sweating, consequently the wax matrix at that region was rearranged into the coarse matrix. In case of flamed lipstick, sweating was delayed and the wax matrix was much coarser than that of unflamed one. Its larger wax matrix at surface region was good for including oil. The effect of molding temperature on sweating was also studied. As the molding temperature was increased, sweating was greatly reduced and the size of wax matrix was increased. It was also found that sweating was influenced with the compatinility of wax and oil. A formula consisting of wax and oil which have good compatibility has a tendency of reduced sweating and increased size of wax matrix. When pigment was added to wax and oil. It was also found that sweating was influenced with the passage of time by observing a thick membrane of wax on surface of lipstick after a month from molding. In case of some lipsticks, the size of wax matrix was altered to bigger or smaller. In conclusion, the structure of wax matrix at the surface region of lipstick was changed with the process of foaming, molding temperature, compatibility of wax and oil, addition of pigment, and the passage of time. In most cases, as the size of wax matrix was increased, sweating was reduced and delayed.

• Korean journal of food and cookery science
• /
• v.9 no.1
• /
• pp.43-51
• /
• 1993

Buckwheat protein isolate was tested for the effects of pH, addition of sodium chloride and heat treatment on solubility, emulsion capacities, emulsion stability, surface hydrophobicity, foam capacities and foam stability. The solubility of buckwheat protein isolate was affected by pH and showed the lowest value at pH 4.5, the isoelectric point of buckwheat protein isolate. The solubility significantly as the pH value reached closer to either ends of the pH, i.e., pH 1.0 and 11.0. The effects of NaCl concentration on solubility were as follows; at pH 2.0, the solubility significantly decreased when NaCl was added; at pH 4.5, it increased above 0.6 M; at pH 7.0 it increased; and at pH 9.0 it decreased. The solubility increased above $80^{\circ}C$, at all pH ranges. The emulsion capacity was the lowest at pH 4.5. It significantly increased as the pH approached higher acidic or alkalic regions. At pH 2.0, when NaCl was added, the emulsion capacity decreased, but it increased at pH 4.5 and showed the maximum value at pH 7.0 and 9.0 with 0.6 M and 0.8 M NaCl concentrations. Upon heating, the emulsion capacity decreased at acidic pH's but was maximised at pH 7.0 and 9.0 on $60^{\circ}C$ heat treatment. The emulsion stability was the lowest at pH 4.5 but increased with heat treatment. At acidic pH, the emulsion stability increased with the increase in NaCl concentration but decreased at pH 7.0 and 9.0. Generally, at other pH ranges, the emulsion stability was decreased with increased heating temperature. The surface hydrophobicity showed the highest value at pH 2.0 and the lowest value at pH 11.0. As NaCl concentrationed, the surface hydrophobicity decreased at acidic pH. The NaCl concentration had no significant effects on surface hydrophobicity at pH 7.0, 9.0 except for the highest value observed at 0.8 M and 0.4 M. At all pH ranges, the surface hydrophobicity was increased, when the temperature increased. The foam capacity decreased, with increased in pH value. At acidic pH, the foam capacity was decreased with the increased in NaCl concentration. The highest value was observed upon adding 0.2 M or 0.4 M NaCl at pH 7.0 and 9.0. Heat treatments of $60^{\circ}C$ and $40^{\circ}C$ showed the highest foam capacity values at pH 2.0 and 4.5, respectively. At pH 7.0 and 9.0, the foam capacity decreased with the increased in temperature. The foam stability was not significantly related to different pH values. The addition of 0.4 M NaCl at pH 2.0, 7.0 and 9.0 showed the highest stability and the addition of 1.0 M at pH 4.5 showed the lowest. The higher the heating temperature, the lower the foam stability at pH 2.0 and 9.0. However, the foam stability increased at pH 4.5 and 7.0 before reaching $80^{\circ}C$.

• Food Science of Animal Resources
• /
• v.32 no.2
• /
• pp.198-203
• /
• 2012

To improve hygienic quality of egg, the ozone treatment was applied. Eggs were inoculated with Salmonella Typhimurium, and the inoculated eggs were treated by ozone (38.8 ppm) for 10-30 min. Furthermore, microbiological and chemical quality changes of eggs were investigated during storage. Initial number of S. Typhimurium of egg shell was 6.18 log CFU/g and the number was increased during storage (p<0.05). However, those of ozonated samples for 10-30 min were 4.22-5.25 log CFU/g, which was lower than that of the control. Especially, ozone treatment for 30 min achieved about 2 decimal reductions and the numbers were maintained during storage. Other physical and chemical characteristics of eggs by ozone treatment, including Haugh unit, yolk color, pHs of egg white and yolk, foaming ability, foam stability and lipid oxidation development were not different when compared with that of the control. Therefore, ozone treatment is one of the available methods to improve hygienic quality of eggs.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.18-25
• /
• 2020

The purpose of this study is to investigate the mechanical and carbon-capture properties of foam concrete containing stainless steel argon oxygen decarbonization(AOD) slag. AOD slag was used as a binder, and foam concrete having a foaming ratio of 69 ± 0.5 % and a slurry density of 573.2 to 578.6 kg / ㎥ was produced. In order to examine the effect of carbonation, blended specimen was cured by two types : normal curing and CO₂ curing. As a result of the experiment, the specimens incorporating AOD slag showed higher compressive strength than Plain after CO₂ curing. According to the analysis of the image of foam concrete, it was confirmed that the ST30 has a lower total pore volume and average pore size than plain, resulting in high compressive strength. The SEM analysis confirmed the formation of calcite by carbonation of AOD slag. Through the thermogravimetric analysis, the increase of CO₂ uptake was confirmed by the incorporation of AOD slag. Foam concrete has a higher porosity than normal concrete, so it is expected that carbon-capture performance can be improved by using a AOD slag.

• Journal of the East Asian Society of Dietary Life
• /
• v.9 no.4
• /
• pp.435-441
• /
• 1999

This study was designed to investigate the effects of roasting temperatures on the antinutritional factors and functional properties of sesame protein isolates. The protein contents a sesame protein isolates (SPI) prepared at roasting temperatures of 5$0^{\circ}C$, 10$0^{\circ}C$, 15$0^{\circ}C$ and 20$0^{\circ}C$ were 65.5%, 66.6%. 68.9% and 64.1%, respectively. Total phenolic compounds, condensed tannin and phytate contents of SPI was increased from 5$0^{\circ}C$ to 20$0^{\circ}C$. From color measurements, higher roasting temperature decreased 'L' and 'b' values significantly, but 'a' value was increased. The bulk density, fat absorption and water absorption of SPI was increased as the temperature of roasting was increased. Sesame protein isolates prepared by roasting at 5$0^{\circ}C$, 10$0^{\circ}C$ and 15$0^{\circ}C$ had higher emulsifying activity than those prepared by roasting at 20$0^{\circ}C$. Foaming capacity of SPI was not changed by roasting up to 10$0^{\circ}C$, but this property was reduced dramatically when roasted at 20$0^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.10
• /
• pp.1509-1515
• /
• 2010

In this study, sponge cakes were prepared with substitution of 5, 10, 15, and 20% banana powder. The specific gravity and viscosity tended to increase as the ratio of banana powder increased. The foaming stability was highest at the 10% substitution level. The control group had significantly higher moisture content and volume index than the banana powder samples. The crust color values (a, b) decreased significantly with increased content of banana powder, but the a value increased. Crumb colors values (L, b) decreased as banana powder content increased while the a value increased. In terms of textural characteristics, the samples containing 5, 15, and 20% banana powder had significantly higher hardness than the 0 and 10% samples. Fracturability and resilience were maximal with 15% and 5%, respectively. Adhesiveness and chewiness were not significantly different among the samples. In the sensory evaluation, scores for banana flavor, coarseness, color, flavor, softness, and overall acceptability increased as the level of banana powder content increased. Sweetness was not significantly different among the samples. The control group had significantly higher egg-flavor as compared to the samples containing banana powder. The results indicated that substituting 10% banana powder to sponge cake is optimal for quality and provides a product with reasonably high overall acceptability.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1775-1781
• /
• 2008

The effects of the type of curing agent on the swelling of the natural rubber(NR) sponge applicable to the self-sealing layer of a helicopter fuel tank were investigated. The curing systems employed were peroxide and mixed ones of sulfur and peroxide. The NR compounds were prepared in a kneader and a roll-mill. The compounds were partially cured in a press at high pressure and subsequently cured fully with expansion in another press at atmospheric pressure. The apparent density of the NR sponge was measured and the cell structure was observed with scanning electron microscopy. The swelling experiments were performed at room temperature using toluene, iso-octane, and an aircraft fuel as a solvent. More rapid volume swelling of the NR sponge cured by peroxide was achieved than cured by sulfur and peroxide with similar amount of curing agent added in rubber compounds. The apparent density and cell structure of the sponge were extremely sensitive to the amount of peroxide, which influences again the swelling behavior of the NR sponge. It is important to control properly two reactions of decomposition of foaming agent and crosslinking of NR in the mold to obtain rapid swelling of the NR sponge on contact of the fuel.

• Journal of Conservation Science
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2018

This study synthesized poly-urea and used it as a filler material for the restoration of porcelain. The synthesized poly-urea was manufactured as a resin and hardener mix that does not undergo contraction during curing, and is unfading. Given an adhesion strength of $180kg/cm^2$ and shearing strength of $200kg/cm^2$, the synthesized poly-urea exhibited the same efficacy as the epoxy putty currently sold in the market. Moreover, it also overcame the drawback of foaming encountered by urethane restoratives, which are a structurally similar type. The hardening time and pot life could also be controlled using additives. The poly-urea used for the restoration of modern artifacts presented a pot life of approximately one hour and took 12 h for complete hardening ($T_{90}$). When a $2{\times}2{\times}2cm$-sized test sample was added to xylene, poly-urea started to separate approximately two hours later and completed perfect pulverization within the solution 24 h later, demonstrating its reversibility. When directly applied to contemporary artifacts, it demonstrated the potential for restoration, as well as convenience and colorfulness.

• Resources Recycling
• /
• v.14 no.2
• /
• pp.19-27
• /
• 2005

The recycling possibility of aluminum waste dross(AWD) as a ceramic raw material of porous light-weight material was examined. A aluminum waste dross was washed 4-7 consecutive times and roasted at 900$^{\circ}% for 1hour as pre-treatments. The properties of the pre-treatment of aluminum waste dross was investigated. It was conformed by XRD result that the spinel crystalline was grown in AWD, after roasting. After the roasted AWD was ground in aqueous state, the sodium hexaphosphate(SHP) as a dispersant which is used for stabilizing the concentrated slurry was added to the AWD slurry. The porous material was prepared by slurry foaming method with surfactant at room temperature. The foamed slurry volumes were 2 and 3 times of the original slurry volume. The properties of porous material with extended volume of 3 times was following: the porosity was about 84%, bulk density was 0.59 g/cm$^3$, the range of pore was from 50 ${\mu}m$ to 500 ${\mu}m$ and mean pore size was about 200 ${\mu}m$. AWD porous material was sintered at 1150$^{\circ}C-1250$^{\circ}C. It was colcluded that AWD was sintered well at 1200$^{\circ}C from material surface observation by SEM.