Browse > Article

The Preparation of porous ceramic material from aluminum waste dross  

Kim, Ki-Seok (Department of Geoenvironmental System Engineering, Hanyang University)
Park, Jay-Hyun (Department of Geoenvironmental System Engineering, Hanyang University)
Park, Jai-Koo (Department of Geoenvironmental System Engineering, Hanyang University)
Publication Information
Resources Recycling / v.14, no.2, 2005 , pp. 19-27 More about this Journal
Abstract
The recycling possibility of aluminum waste dross(AWD) as a ceramic raw material of porous light-weight material was examined. A aluminum waste dross was washed 4-7 consecutive times and roasted at 900$^{\circ}% for 1hour as pre-treatments. The properties of the pre-treatment of aluminum waste dross was investigated. It was conformed by XRD result that the spinel crystalline was grown in AWD, after roasting. After the roasted AWD was ground in aqueous state, the sodium hexaphosphate(SHP) as a dispersant which is used for stabilizing the concentrated slurry was added to the AWD slurry. The porous material was prepared by slurry foaming method with surfactant at room temperature. The foamed slurry volumes were 2 and 3 times of the original slurry volume. The properties of porous material with extended volume of 3 times was following: the porosity was about 84%, bulk density was 0.59 g/cm$^3$, the range of pore was from 50 ${\mu}m$ to 500 ${\mu}m$ and mean pore size was about 200 ${\mu}m$. AWD porous material was sintered at 1150$^{\circ}C-1250$^{\circ}C. It was colcluded that AWD was sintered well at 1200$^{\circ}C from material surface observation by SEM.
Keywords
aluminum dross; dross residue; porous material; ceramic foam;
Citations & Related Records
연도 인용수 순위
  • Reference
1 박은화, 임남웅, 이경아, 2003: 폐알루미늄 드로스와 유리 cullet를 이용한 발포성 단열재 개발, 한국폐기물학회지, 12(4) pp. 247-259
2 Necip, U and Michel G. D., 2002: Comparison of salt-free aluminum dross treatment processes, Resour., Conservation and Recycling 36, p.61   DOI   ScienceOn
3 Khoei A. R., Masters I. and Gethin D. T., 2002: Design optimisation of aluminum recycling processes using Taguchi technique, J. Mater. Process. Tech. 127, p.96   DOI   ScienceOn
4 박형규 외5인, 2003: 알루미늄드로스의 세라믹원료화 처리기술개발, 과학기술부 보고서
5 Schmoll, E., 1986: Recycling in Secondary Aluminium Smelting Works treatment of Salt Slag, Sulzer Technical Review, p.25
6 Kevorkijan, V. M., 1999: The quality of aluminum dross particles and cost-effective reinforcement for structural aluminum-based composites, Composite Sci. & Tech. 59, p.1745   DOI   ScienceOn
7 한국환경정책평가연구원, 1997: 폐기물 관리정책의 평가와 개선방안 연구
8 Ezzat, A. EI-Katatny et al., 2003: Surface composition, charge and texture of active alumina powders recovered from aluminum dross tailings chemical waste, Powder Tech., 132, p.137   DOI   ScienceOn
9 Kulic G.J. and Daley J.C. 1990: Second International Symposium on Recycling of Metals and Engineered Materials. Ed. by J.H.L. van et al., TMS, p.427
10 Montanaro, L., Jorand, Y., Fantozzib, G. and Negroa, A. 1998: Ceramic Foams by Powder Processing, J. Euro. Ceram. Soc., 18, p.1339   DOI   ScienceOn
11 Ezzat, A. EI-Katatny et al., 2000: Recovery of ethene-selective $FeO_x/Al_2O_3$ ethanol dehydration catalyst from industrial chemical wastes, Applied Catalysis A: General, 199, p.83   DOI   ScienceOn
12 박재구, 이정식, 1998: Perparation of Porous Inorganic Materials by Foaming Slurry, 한국세라믹공학회, 35(12), p.1280
13 Lavoie, S., Dube, C. and Dube, G., 1990: The Minerals, Metal & Materials Society, Light Metals, p.981
14 김종각, 2002: 알루미늄 압연 산업동향, 제2회 알루미늄산업 세미나 발표집, 한국비철금속협회, p.81
15 Schuth, F., Sing, K.S.W. and Weitkamp, J., 2002: Handbook of Porous Solids, Wiley-VCH Weinheim, p.1626