• 한국구조물진단유지관리공학회 논문집
• /
• 제23권3호
• /
• pp.92-95
• /
• 2019

본 논문에서는 압분광법을 기반으로 강재에 작용하는 응력을 비파괴/비접촉식으로 측정할 수 있는 새로운 방법은 제안하고, 이에 대한 가능성을 실험적으로 검증하였다. 분광법은 일반적으로 대상물의 화학적 성분을 분석하는데 주로 사용되며, 토목분야에서는 강재의 부식을 판단하는데 일부 사용되고 있다. 압분광법은 대상물이 하중을 받을 때 측정된 스펙트럼이 하중이 없는 상태에서 측정된 스펙트럼으로부터 이동(Shift)되는 현상인, 압분광현상을 기반으로 응력을 측정하는 방법이다. 여기서, 응력-스펙트럼 이동 관계를 선형으로 가정하였을 때, 압분광 계수를 도출할 수 있으며, 이를 통하여 현재상태의 응력을 측정할 수 있다. 해당 기술은 레이저를 기반으로한 비접촉식 응력측정 기술로써, 최근에 철도 구조물에 대한 응력 측정을 시작으로 다양한 토목구조물의 응력측정에 대한 적용이 시도되고 있다. 본 연구에서는 이와 같은 압분광법 기술을 이용하여 강구조물의 응력을 측정할 수 있도록, 용사코팅을 이용하여 알루미나를 구조용 강재표면에 도포하고, 일축압축 하중시험을 수행하여 각 하중단계에서의 스펙트럼 이동(Shift)값을 확인하였다. 이를 통하여, 각 하중값과 스펙트럼 이동값이 선형관계임을 확인하였다. 따라서, 이와 같은 선형적인 관계로 부터, 1차 선형식의 상수값인 압분광 계수를 도출하고, 이를 통하여 강재에 작용하는 응력을 측정할 수 있을 것으로 기대된다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 춘계학술대회 논문집
• /
• pp.51-52
• /
• 2003

대기 중에서 HOx(OH, H $O_2$) 라디칼은 매우 중요한 산화제로, 대류권내 광화학 반응에 있어 그 역할이 핵심적이라 할 수 있다. 이러한 OH 라디칼의 정확한 농도를 측정하는 것은 대기의 산화능, 기후 변화 및 대기 중의 광화학 반응을 보다 정확히 이해하기 위해 매우 필요한 연구이다. 그러나 OH를 비롯한 HOx 라디컬의 농도 측정은 이들이 라디칼이기 때문에 매우 어려운 것이 사실이다. 즉, 이들은 대기 내에 존재하는 양이 절대적으로 적고 (OH: $10^{6}$molecules cm-$^3$, H $O_2$: $10^{8}$molecules cm-$^3$), 반응성이 커서 수명이 짧기 때문에 측정에 많은 어려움이 따른다. (중략)

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.319-320
• /
• 2003

대기 중에서 HOx(OH, H $O_2$) 라디칼은 중요한 산화제로, 대류권내 광화학 반응에서 핵심적인 역할을 한다 이러한 OH 라디칼의 정확한 농도를 측정하는 것은 대기의 산화능력, 기후 변화 및 대기 중의 광화학 반응을 보다 정확히 이해하기 위해 필수적이다. 그러나 OH를 비롯한 HOx 라디컬의 농도 측정은 대기 내에 존재하는 양이 절대적으로 작고 (OH: $10^{6}$molecules $cm^{-3}$, H $O_2$: $10^{8}$molecules $cm^{-3}$), 반응성이 커서 수명이 짧기 때문에 측정에 많은 어려움이 따른다. (중략)

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.335-344
• /
• 2015

Purpose: Soybean growth is adversely affected by environmental stresses such as drought, extreme temperatures, and nutrient deficiency. The objective of this study was to develop a method for rapid measurement of drought stress in soybean plants using a hyperspectral fluorescence imaging technique. Methods: Hyperspectral fluorescence images were obtained using UV-A light with 365 nm excitation. Two soybean cultivars under drought stress were analyzed. A partial least square regression (PLSR) model was used to predict drought stress in soybeans. Results: Partial least square (PLS) images were obtained for the two soybean cultivars using the results of the developed model during the period of drought stress treatment. Analysis of the PLS images showed that the accuracy of drought stress discrimination in the two cultivars was 0.973 for an 8-day treatment group and 0.969 for a 6-day treatment group. Conclusions: These results validate the use of hyperspectral fluorescence images for assessing drought stress in soybeans.

• 한국연소학회지
• /
• 제12권4호
• /
• pp.1-7
• /
• 2007

Carbon monoxide (CO) is not only an important intermediate species in chemical reaction mechanisms of hydrocarbon fuel combustion, but also a crucial pollutant species emitted from automotive engines. To better understand the physical processes impacting CO emissions, the development of laser-based measurement techniques that can visualize in-cylinder CO distributions is desirable. Among these techniques, Laser-Induced Fluorescence (LIF) is a sensitive and species-selective detection technique capable of good spatial resolution. However, some technical matters such as deep UV excitation, severe pressure dependency of the LIF signal, and potential interference from other species have been major challenges for CO LIF application. This study is focused on investigating the feasibility of CO two-photon LIF in a direct-injection diesel engine operating at typical pressure and temperature conditions with commercial grade diesel fuel. Spectroscopic analysis shows that the CO fluorescence signal can be separated from $C_2$ Swan band or broadband fluorescence from PAHs when the signal is collected near 483 nm. The signal-to-noise ratio of CO LIF deteriorate rapidly as pressure is increased, following $P^{-1.49}$ which matches the theoretical signal pressure dependency.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.999-1008
• /
• 2002

The spray structures and distribution characteristics of liquid and vapor phases in non-evaporating and evaporating Gasoline Direct Injection (GDI) fuel sprays were investigated using Laser Induced Exciplex Fluorescence (LIEF) technique. Dopants were 2% fluorobenzene and 9% DEMA (diethyl-methyl-amine) in 89% solution of hexane by volume. In order to study internal structure of the spray, droplet size and velocity under non-evaporating condition were measured by Phase Doppler Anemometry (PDA). Liquid and vapor phases were visualized at different moments after the start of injection. Experimental results showed that the spray could be divided into two regions by the fluorescence intensity of liquid phase: cone and mixing regions. Moreover, vortex flow of vapor phase was found in the mixing region. About 5㎛ diameter droplets were mostly distributed in the vortex flow region. Higher concentration of vapor phase due to vaporization of these droplets was distributed in this region. Particularly, higher concentration of vapor phase and lower one were balanced within the measurement area at 2ms after the start of injection.

• 한국환경과학회지
• /
• 제27권5호
• /
• pp.309-317
• /
• 2018

In this study, a laser sheet technique and PLIF (Planar laser-induced fluorescence) are applied to a laboratory-scale pulverized coal burner of the open type, and the spatial relationship of the pulverized coal particle zone and the combustion reaction zone is examined by simultaneous measurement of Mie scattering and OH-LIF images. It is found that this technique can be used to investigate the spatial relationship of the combustion reaction zone and pulverized-coal particles in turbulent pulverized-coal flames without disturbing the combustion reaction field. In the upstream region, the combustion reaction occurs only in the periphery of the clusters where high-temperature burned gas of the methane pilot flame is entrained and oxygen supply is sufficient. In the downstream region, however, combustion reaction can be seen also within clusters of pulverized-coal particles, since the temperature of pulverized-coal particles rises, and the mixing with emitted volatile matter and ambient air is promoted.

• Fisheries and Aquatic Sciences
• /
• 제5권4호
• /
• pp.311-313
• /
• 2002

Proteolytic activity of live Uronema manum was analyzed by fluorescence polarization (FP) technique. Protease activity was measured by a decrease in FP value using fluorescein isothiocynate (FITC)-casein as a protein substrate. The results demonstrated an inverse linear relationship between fluorescence polarization (FP) values and live ciliate concentration over the range $1\times10^4\;to\;2\times10^5$ cells/well. However, the FP values of $10-10^3$ live parasites were not different significantly from that of control. Time-dependent decrease in FP value was shown in the wells containing live U. marinum. In the present study, FP assay had the benefit to provide measurements of substrate hydrolysis by live parasites in real-time, and did not require separations, precipitations, or transfers of reaction mixture.

• Applied Microscopy
• /
• 제46권1호
• /
• pp.6-13
• /
• 2016

Fluorescence lifetime imaging microscopy (FLIM) has been considered an effective technique to investigate chemical properties of the specimens, especially of biological samples. Despite of this advantageous trait, researchers in this field have had difficulties applying FLIM to their systems because acquiring an image using FLIM consumes too much time. Although analog mean-delay (AMD) method was introduced to enhance the imaging speed of commonly used FLIM based on time-correlated single photon counting (TCSPC), a real-time image reconstruction using AMD method has not been implemented due to its data processing obstacles. In this paper, we introduce a real-time image restoration of AMD-FLIM through fast parallel data processing by using Threading Building Blocks (TBB; Intel) and octa-core processor (i7-5960x; Intel). Frame rate of 3.8 frames per second was achieved in $1,024{\times}1,024$ resolution with over 4 million lifetime determinations per second and measurement error within 10%. This image acquisition speed is 184 times faster than that of single-channel TCSPC and 9.2 times faster than that of 8-channel TCSPC (state-of-art photon counting rate of 80 million counts per second) with the same lifetime accuracy of 10% and the same pixel resolution.

• 대한의용생체공학회:의공학회지
• /
• 제33권3호
• /
• pp.114-127
• /
• 2012

Recent technical advancement allows noninvasive measurement of blood glucose. In this literature, we reviewed various noninvasive techniques for measuring glucose concentration. Optical or electrical methods have been investigated. Optical techniques include near-infrared spectroscopy, Raman spectroscopy, optical coherence technique, polarization, fluorescence, occlusion spectroscopy, and photoacoustic spectroscopy. Electrical methods include reverse iontophoresis, impedance spectroscopy, and electromagnetic sensing. Ultrasound, detection from breath, or fluid harvesting technique can be used to measure blood glucose level. Combination of various methods is also promising. Although there are many interesting and promising technologies and devices, there need further researches until a commercially available non-invasive glucometer is popular.