• 한국ITS학회 논문지
• /
• 제22권5호
• /
• pp.148-162
• /
• 2023

본 연구는 교통안전표지를 기반으로 도시부 도로 환경에서 자율주행차량의 주행행태 변화에 따른 적정 인지 시점을 도출하는 것을 목적으로 하였다. 이를 위해 현재 설치 및 운영 중인 교통안전표지 중에서 주행행태 변화를 유도하는 32종의 표지를 선별하고 주행행태 변화에 따라 3가지로 분류하였다. 이를 토대로 설계된 3가지 시나리오 (일시정지, 속도변경, 차로변경)를 통해 자율주행차량의 인지 시점에 따른 교통류 영향을 확인하고, 자율주행차량의 적정 인지 시점에 대해 도출하였다. 분석 결과, 각 시나리오는 교통류의 변화 및 안전성을 보장하기 위해 기존 설치된 교통안전표지 정보를 미리 전달받아야 하는 것으로 나타났다. 이에 따라, 본 연구를 통해 도출된 적정 인지 시점은 자율주행차량에게 메세지 셋을 전달하는 기준 수립이나 자율주행차량을 위한 교통안전표지 개정 근거로 활용될 수 있을 것으로 사료된다. 이와 더불어, 향후 자율주행차량의 실 도로 도입에 따라 도시부 도로에서 안전하고 효율적인 주행 전략 수립에도 기여 할 수 있을 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1715-1721
• /
• 2002

Numerical analysis was conducted to characterize the gas flow field and particle deposition on a horizontal freestanding semiconductor wafer under the laminar flow field at vacuum environment. In order to calculate the properties of gas, the gas was assumed to obey the ideal gas law. The particle transport mechanisms considered were convection, Brownian diffusion and gravitational settling. The averaged particle deposition velocities and their radial distributions fnr the upper surface of the wafer were calculated from the particle concentration equation in an Eulerian frame of reference for system pressures of 1 mbar~1 atm and particle sizes of 2nm~10$^4$ nm(10 ${\mu}{\textrm}{m}$). It was observed that as the system pressure decreases, the boundary layer of gas flow becomes thicker and the deposition velocities are increased over the whole range of particle size. One thing to be noted here is that the deposition velocities are increased in the diffusion dominant particle size range with decreasing system pressure, whereas the thickness of the boundary layer is larger. This contradiction is attributed to the increase of particle mechanical mobility and the consequent increase of Brownian diffusion with decreasing the system pressure. The present numerical results showed good agreement with the results of the approximate model and the available experimental data.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.411-419
• /
• 2004

Titania particles are widely used as a photocatalyst to treat various contaminants in air and water. Titania particles were formed by vapor-phase oxidation of titanium tetraisopropoxide (TTIP) in a tube furnace between 773 and 1,273 K. The effect of process variables such as furnace temperature, flow rate of carrier air, and flow rate of sheath air on powder size and phase characteristics was investigated using a scanning mobility particle sizer (SMPS), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The size distribution of synthesized titania particles was characterized with mode diameter and peak concentration. The mode diameter ranging from 20 to 80 nm decreased with increasing flow rates of sheath air and carrier air, and increased with increasing furnace temperature. The peak concentration increased with increasing flow rates of sheath air and carrier air The best synthetic condition for high production rate can be derived from the experimental data set represented by mode diameter and peak concentration. The crystal structure of synthesized titania particles was found to be anatase phase, ensuring high photocatalytic potential.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.932-938
• /
• 2007

The structural, optical, and electrical properties of ZnO thin films grown on glass by radio-frequency (rf) magnetron sputtering were investigated. The mixture flow ratio of $O_2$ to Ar, which was operated with sputtering gas, was chosen as a parameter for growing high-qualify ZnO thin films. The structural properties and surface morphologies of the thin films were characterized by the X-ray diffraction and the atomic force microscope, respectively. As for the optical properties of the films, the optical absorbance was measured in the wavelength range of 300-1100 nm by using UV-VIS spectrophotometer. The optical transmittance, absorption coefficient, and optical bandgap energy of ZnO thin films were calculated from the measured data. The crystallinity of the films was improved and the bandgap energy was increased from 3.08 eV to 3.23 eV as the oxygen flow ratio was increased from 0 % to 50 %. Furthermore, The ultraviolet and violet luminescences were observed by using photoluminescence spectroscopy. The hall mobility was decreased with the increase of oxygen flow ratio.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.517-520
• /
• 2004

The power flow analysis(PFA) can be effectively used to predict structural vibration in medium-to-high frequency ranges. In this paper, vibration experiment has been performed to observe the analytical characteristics of the power flow analysis of the vibration of a plate. In the experiment, the loss factor of the plate and the input mobility at a source point have been measured. The data for the loss factor has been used as the input data to predict the vibration of the plate with PFA. The frequency response functions have been measured over the surface of the plate. The comparison between the experimental results and the predicted results for the frequency response functions showed that PFA can be an effective tool to predict structural vibration in medium-to-high frequency ranges.

• 한국ITS학회 논문지
• /
• 제21권2호
• /
• pp.17-32
• /
• 2022

본 연구에서는 개별 차량의 차두 시간(time headway) 정보를 활용하여 고속도로 환경에서의 단일 링크에 대한 교통류 모형(flow-density diagram)을 추정하는 방법에 대해 탐구한다. 차두 시간 기반 교통류 모형(empirical flow-density diagram) 연구를 위해 차량용 비전 센서가 탑재된 실험 차량에서 9개월동안 수집된 데이터의 전처리 및 GIS 기반 맵 매칭을 수행한다. 기존의 교통류 모델식을 활용한 차두 시간 기반 교통류 모형(empirical flow-density diagram)의 검증을 위해, 차량 검지기 기반의 VDS(Vehicle Detection System) 데이터(loop detection traffic data) 기반 교통류 모형과 결과 비교 및 분석을 수행한다. 차두 시간 기반 교통류 모형의 추정 오차 원인을 분석하기 위해 각 교통류 모형의 차두 시간 및 차두 거리의 확률분포와 단위시간 교통량과 차량 밀도의 표준편차를 활용하였다. 분석 결과 링크 내 제한된 샘플 차량 대수 및 수집 데이터에 대한 주행환경 편향성이 추정 오차의 주된 요인이며. 이에 따른 추정 오차 개선을 위한 방법에 대해 제안한다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.1031-1039
• /
• 1999

Electrospraying comprises the generation of liquid droplets by applying a high voltage to the surface of a liquid. By monitoring the current and the flow rate it was possible to obtain a stable cone jet mode in a given condition. In this work the liquid contained NaCl particles resolved in distilled water. The NaCl particles increased concentration of the ionized solution and thus increased electrical conductivity of the liquid, which was inversely proportional to the flow rate in the cone jet mode. A number of sprayed droplets were sampled and dried enough, and then the size of NaCl particles were measured. The measured droplet diameter was a little larger than two theoretical diameters, Rayleigh diameter and mobility diameter.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.91-102
• /
• 2015

Analytical solutions for the forced convection heat transfer of viscoelastic fluids obeying the Giesekus model are obtained in a concentric annulus under laminar flow for both thermal and hydrodynamic fully developed conditions. Boundary conditions are assumed to be (a) constant fluxes at the walls and (b) constant temperature at the walls. Temperature profiles and Nusselt numbers are derived from dimensionless energy equation. Subsequently, effects of elasticity, mobility parameter and viscous dissipation are discussed. Results show that by increasing elasticity, Nusselt number increases. However, this trend is reversed for constant wall temperature when viscous dissipation is weak. By increasing viscous dissipation, the Nusselt number decreases for the constant flux and increases for the constant wall temperature. For the wall cooling case, when the viscous dissipation exceeds a critical value, the generated heat overcomes the heat which is removed at the walls, and fluid heats up longitudinally.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.373-379
• /
• 2013

Mg-doped zinc tin oxide (ZTO:Mg) thin films were prepared on glasses by rf magnetron sputtering. $O_2$ was introduced into the chamber during the sputtering. The optical properties of the films as a function of oxygen flow rate were studied. The crystal structure, elementary properties, and depth profiles of the films were investigated by X-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS), and secondary ion mass spectrometry (SIMS), respectively. Bottom-gate transparent thin film transistors were fabricated on $N^+$ Si wafers, and the variation of mobility, threshold voltage etc. with the oxygen flow rate were observed.

• Tribology and Lubricants
• /
• 제10권1호
• /
• pp.69-77
• /
• 1994

Oil flow pass of hermetic scroll compressor with back pressure chamber was described. Dynamic analysis was preceded in order to obtain the loads on the lubricating contacts. The mobility method of dynamically loaded journal bearings was applied to the crank jornal bearing and lower main bearing, and they could be designed to operate under fluid film lubrication. From the consideration of their film thicknesses and oil flow rates, optimal bearing clearances or other bearing dimensions could be assessed. The major friction loss was calculated to be from the axial force between the two scrolls. Therefore, it was suggested that the designers should be careful to reduce the over-turning moment on the orbiting scroll.